Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Dallas, TX
Window installation in Dallas means working with a housing stock built between the 1950s and 1980s, much of it still carrying original single-pane aluminum frames or failed double-pane units, on top of expansive clay soil that moves every door and window frame out of square. We install and replace windows and doors across Dallas with a written price before any work starts, and a documented photo record when it finishes. Call (509) 265-6387 for a free estimate.
Why Dallas Homes Are Different
Dallas sits atop deep layers of expansive montmorillonite clay, the local “black gumbo” that swells with winter rains and shrinks violently during summer droughts. Foundation movement from that soil cycle racks door and window frames out of square across virtually every neighborhood, which is why a door that binds shut in August may swing freely again by November. Sticking doors, windows that won’t lock, and failed IGU seals in Dallas are frequently a soil problem disguised as a window and door problem. Add to that the highest hail-frequency corridor in the country, plus 100°F summers followed by hard freezes like Winter Storm Uri in February 2021, and you get weatherstripping and caulk degradation faster than almost any other Sun Belt metro. The older neighborhoods of M Streets, Lakewood, and Lake Highlands carry original wood-frame casements and double-hungs that need period-appropriate replacements, while Uptown and Preston Hollow infill drives demand for large-format, impact-rated glazing. Our crews read the soil season before diagnosing a frame, because in Dallas the ground under the slab is part of the opening.
Our Main Dallas Services
Two services generate most of the calls from Dallas homeowners: full door installation and complete window replacement. Both jobs here require accounting for the clay soil movement and the rapid seal failure that comes with Dallas weather, and both get the same written-price treatment before anything is ordered.
Door Installation in Dallas
Entry doors in Dallas take abuse from three directions: summer heat that warps slab edges, hail that dents steel and fiberglass, and foundation movement that pulls frames out of square. We measure every rough opening with a laser and record the frame readings on the survey you keep, then install the door to the documented numbers, not to hope. See Door Installation in Dallas for the full service breakdown, pricing, and common Dallas door failures.
Window Replacement in Dallas
Window replacement in Dallas is rarely just a glass swap. Original single-pane aluminum frames from the 1950s and 1960s leak conditioned air year-round, and the 1980s builder-grade double-pane units are now past their 25 to 30 year seal life, showing fog between panes and failed IGU seals. Read the full Window Replacement in Dallas page for pricing by window type and what happens when we find the openings are out of square.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterWindow Installation in Dallas
Window installation in Dallas has to account for two local conditions that collide constantly: stock built between 1950 and 1985 that still carries original single-pane aluminum or early builder-grade double-pane units, and a clay soil cycle that moves frames a fraction of an inch every season. We measure every opening to the frame readings, write the price before ordering, and never ask a crew to force a window into an out-of-square rough opening. The Window Installation process begins with a measured survey you keep.
Single & Double Hung Windows
Signs you need it
Sashes that stick mid-travel, won’t stay up without a prop, or rattle in the wind when closed are the usual signs that a hung window’s balance system or frame is failing.
What it costs in Dallas
Single and double hung window installation in Dallas typically runs $350 to $900 per window depending on glass package, frame material, and whether the rough opening needs correction before the new unit goes in.
How we do it
We record frame readings on the survey you keep, order to those numbers with the manufacturer spec called out, remove the old unit, install the new hung window square and flashed, and photograph the finished opening for the record.
Casement Windows
Signs you need it
A casement that won’t crank open, has a bent hinge, or leaks air at the weatherstrip is past the point where hardware adjustment fixes the problem.
What it costs in Dallas
Casement window installation in Dallas typically runs $550 to $1,100 per window, with the higher end reflecting larger openings and impact-rated glass requirements in certain neighborhoods.
How we do it
We verify the opening is square to the recorded measurements, pull the old window, set the new casement in place with shims at the documented points, seal the exterior, and leave the photo record with the written scope.
What Window Installation Costs in Dallas
| Item | Typical range in Dallas |
|---|---|
| Single & Double Hung Windows | $350-$900 per window |
| Casement Windows | $550-$1,100 per window |
| Awning & Hopper Windows | $400-$950 per window |
How much does window installation cost in Dallas?
Most Dallas window installations land between $350 and $1,100 per window depending on type, glass package, and whether the opening needs correction for clay-driven frame movement. The written quote you receive before work starts is the same document the crew works from. Call (509) 265-6387 for an exact number.
Will the frame readings change the price once work starts?
No. The measured survey is the quote, and the quote is what the crew installs to. If the survey missed something, the correction is on us under Haven Clause 1, not an add-on invoice. Call (509) 265-6387 to schedule the survey.
Impact Windows & Doors in Dallas
Dallas is not on the coast, but hail the size of golf balls hits single-pane and thin double-pane glass hard enough to shatter it, and storm-driven debris does real damage to doors and window frames across the metro. Impact-rated windows and doors in Dallas are specified for hail survivability, forced-entry resistance, and the large storm cycles that hit entire ZIP codes at once. See our Impact Windows & Doors hub for the product lines by performance tier.
Impact-Resistant Windows
Signs you need it
You live in a Dallas hail corridor and the current windows are single-pane aluminum or early double-pane glass that has already cracked or pitted in past storms.
What it costs in Dallas
Impact-resistant windows in Dallas typically run $600 to $1,500 per opening depending on manufacturer, glass package, and frame material, with laminated glass pushing the price toward the upper end.
How we do it
We specify the impact rating to the exposure on that face of the house, order from manufacturers like CGI or CWS by performance tier, install to the written survey, and leave the photo record plus the manufacturer’s test documentation.
Hurricane Impact Windows
Signs you need it
If your Dallas block sees repeated hail claims, or the home is in an area where flying debris is common during storm season, hurricane-rated laminated glass stops the breach that ordinary glazing can’t.
What it costs in Dallas
Hurricane impact windows in Dallas typically run $700 to $1,800 per opening depending on size, design pressure rating, and whether the frame is replacement or new construction.
How we do it
We confirm the design pressure rating required for the wall, order laminated impact glazing from CGI or ES Windows to spec, install the unit with the documented anchoring schedule, and photograph the finished opening.
What Impact Windows & Doors Costs in Dallas
| Item | Typical range in Dallas |
|---|---|
| Impact-Resistant Windows | $600-$1,500 per opening |
| Hurricane Impact Windows | $700-$1,800 per opening |
| Impact Sliding Glass Doors | $1,800-$4,500 per opening |
Do I need impact windows in Dallas if I’m not on the coast?
Not for hurricane code, but Dallas is in one of the highest hail-frequency corridors in the United States. Impact-rated laminated glass survives hail that shatters standard annealed glass, which means fewer emergency replacements after every storm. Call (509) 265-6387 for a written price on the openings you have.
Will impact windows change my insurance rate in Dallas?
Many Dallas homeowners report premium reductions after installing impact-rated openings, but the exact discount comes from your carrier, not from us. What we provide is the manufacturer’s test documentation your insurer will want to see. Call (509) 265-6387 to discuss the right rating for your house.
Energy-Efficient Windows in Dallas
Energy-efficient windows in Dallas have to fight a specific battle: 100°F summers that push heat through every uncoated pane, followed by hard freezes that stress failed seals until the fog shows up between the glass. The fix is low-E coatings, argon fill, and frames that don’t conduct heat the way original 1950s aluminum does. Our Energy-Efficient Windows process specifies U-factor and SHGC to the exposure of each wall, not to a generic regional average.
Low-E & Argon Gas Glass
Signs you need it
Rooms facing west or south in Dallas feel hot by mid-afternoon even with the AC running, and the glass reads warm to the touch from the inside.
What it costs in Dallas
Low-E and argon gas glass upgrades in Dallas typically add $50 to $150 per window over standard double-pane glazing, depending on the coat count and frame material.
How we do it
We match the low-E coating to the wall’s solar exposure, order the argon-filled unit to the measured opening, and install it so the seal stays dry and documented in the photo record.
ENERGY STAR Replacement Windows
Signs you need it
Your existing windows carry condensation between the panes, drafts at the frame, or dates from the 1980s or earlier, which means the seal life is gone and the U-factor no longer holds.
What it costs in Dallas
ENERGY STAR replacement windows in Dallas typically run $400 to $1,200 per window for full-frame replacements, with retrofit inserts landing at the lower end of that range.
How we do it
We specify the replacement to meet ENERGY STAR South Central criteria for U-factor and SHGC, write the price on the survey you keep, and install with new flashing and documented photos.
What Energy-Efficient Windows Costs in Dallas
| Item | Typical range in Dallas |
|---|---|
| Low-E & Argon Gas Glass upgrade | $50-$150 per window added |
| ENERGY STAR Replacement Windows | $400-$1,200 per window |
| Insulated Laminated Glass | $300-$900 per window |
What U-factor should I look for in Dallas?
For Dallas climate, look for a U-factor of 0.30 or lower and an SHGC of 0.25 or lower on west and south exposures. The exact numbers depend on the wall and the glass package. Call (509) 265-6387 and we’ll put the right spec in the written quote.
How much will energy-efficient windows actually save on my Dallas electric bill?
Savings depend on the current windows, the house orientation, and your cooling set point. The bigger immediate difference is comfort: rooms that no longer spike in temperature by mid-afternoon. Call (509) 265-6387 for a written price on your openings.
Sliding & Patio Doors in Dallas
Sliding and patio doors in Dallas carry a compounding problem: the clay soil moves the rough opening out of square, which jams the track and tears the rollers, while hail and hard freezes degrade the weatherstripping faster than most metros. A slider that fought you in August may ride smooth in November, but the roller damage is already done. Our Sliding & Patio Doors installs start with frame readings, not an assumption that the problem is the hardware.
Patio Doors
Signs you need it
The door drags in the track, takes two hands to move, or daylight shows at the threshold when closed, which in Dallas usually means the frame has moved with the clay.
What it costs in Dallas
Patio door installation in Dallas typically runs $1,200 to $3,500 installed depending on glass package, frame material, and whether the rough opening needs squared before the new door goes in.
How we do it
We record the frame readings on the written survey, order the door to those numbers, correct the opening if the soil racked it, and install with the photo record that shows the final alignment.
Impact Sliding Glass Doors
Signs you need it
A large glass wall facing the prevailing storm direction, or an existing slider with hail pitting and failed seals, needs laminated impact glazing instead of standard annealed glass.
What it costs in Dallas
Impact sliding glass doors in Dallas typically run $1,800 to $4,500 depending on panel count, design pressure rating, and whether the track and header need reinforcement.
How we do it
We specify the impact rating to the opening’s exposure, order from manufacturers like CWS or ES Windows, install the new track and panels to the written survey, and document the finished door with photos.
What Sliding & Patio Doors Costs in Dallas
| Item | Typical range in Dallas |
|---|---|
| Patio Doors | $1,200-$3,500 installed |
| Impact Sliding Glass Doors | $1,800-$4,500 installed |
| Sliding Glass Door Replacement | $1,000-$3,200 installed |
Why does my Dallas patio door stick in summer but not winter?
The clay soil under your slab expands and contracts with moisture, and summer drought shrinks it enough to drop one corner and bind the door frame. The fix often starts with checking the frame readings, not the rollers. Call (509) 265-6387 to schedule a measured survey.
Do you replace the whole slider or just the rollers in Dallas?
If the frame is square, roller replacement can restore the door. If the clay has racked the opening, new rollers will fail again quickly. We measure first, then tell you which situation you have in writing. Call (509) 265-6387 for the survey.
Impact Garage Doors in Dallas
Impact garage doors in Dallas answer two local realities: hail that dents and sometimes penetrates standard steel panels, and storm winds that test the track anchoring on the largest opening on the house. A dented garage door is the obvious failure, but a racked track from soil movement or a wind event is the failure that takes the door down. Our Impact Garage Doors installs are specified by wind-load code and panel rating, not by what’s on the truck.
Hurricane-Rated Garage Doors
Signs you need it
The existing door shows hail dents deep enough to see from the street, or the panels flex visibly under wind load and the track rattles in the brackets during Dallas storms.
What it costs in Dallas
Hurricane-rated garage doors in Dallas typically run $2,000 to $5,500 installed depending on door size, panel rating, and whether the track and spring system is also upgraded.
How we do it
We confirm the wind-load rating required for the opening, order the rated door from a verified manufacturer like CWS, and install with the anchoring schedule documented in the photo record.
Garage Door Replacement
Signs you need it
Panels are dented or cracked, the door sits out of level, or the tracks have pulled away from the jambs after years of soil movement and storm cycles.
What it costs in Dallas
Garage door replacement in Dallas typically runs $1,500 to $4,000 for a standard two-car door depending on panel material, insulation, and whether the tracks and opener need work.
How we do it
We measure the opening and track condition first, order the door to the written survey, replace panels and hardware as a system, and photograph the finished door as part of the standard record.
What Impact Garage Doors Costs in Dallas
| Item | Typical range in Dallas |
|---|---|
| Hurricane-Rated Garage Doors | $2,000-$5,500 installed |
| Garage Door Replacement | $1,500-$4,000 installed |
| Energy-Efficient Garage Doors | $1,800-$4,800 installed |
Do I need wind-load rated garage doors in Dallas?
Dallas is not in a coastal wind zone, but the building code and the hail frequency make rated doors worth the difference for the largest opening on the house. We specify the rating to your opening and write the price before ordering. Call (509) 265-6387 for a survey.
Can you fix a dented garage door or do I have to replace it in Dallas?
Small dents may be repairable, but repeated hail hits across multiple panels usually mean replacement. We measure and tell you which option applies to your door, in writing, with no charge for the survey. Call (509) 265-6387 to schedule it.
Custom & Geometric Windows in Dallas
Custom and geometric windows in Dallas appear most often in two places: the original wood-frame homes of M Streets, Lakewood, and Lake Highlands where radius tops and angled glass need period-appropriate replacements, and the Uptown and Preston Hollow infill projects where large-format openings drive the design. Neither one fits a stock size, and the clay soil movement means the rough opening has to be measured exactly, never eyeballed. Our Custom & Geometric Windows work is built to the written survey, then documented with a photo record when finished.
Geometric & Shaped Windows
Signs you need it
The existing shaped window leaks at the mullions, the glass has failed seals from freeze-thaw cycles, or the frame has pulled apart at the angled joints.
What it costs in Dallas
Geometric and shaped windows in Dallas typically run $800 to $3,000 per window depending on the glass shape, frame material, and whether the opening needs correction for movement.
How we do it
We take the field measurements to the written survey, order the custom shape from manufacturers like ECO Window Systems to those numbers, and install with the photo record showing the finished fit.
Arched & Curved Windows
Signs you need it
An arched window in a Dallas brick veneer home has lost its radius to frame movement or shows seal failure at the curved glass, and no stock replacement matches the opening.
What it costs in Dallas
Arched and curved windows in Dallas typically run $1,200 to $4,500 per window, with radius glass and custom framing pushing toward the upper end of the range.
How we do it
We template the curve, write the radius into the survey you keep, order the custom arched unit, and install it with the same written-price rule that governs every opening.
What Custom & Geometric Windows Costs in Dallas
| Item | Typical range in Dallas |
|---|---|
| Geometric & Shaped Windows | $800-$3,000 per window |
| Arched & Curved Windows | $1,200-$4,500 per window |
| Oversized Openings | $2,000-$6,000 per opening |
Can you match the original wood window shapes in Dallas historic homes?
Yes, for homes in M Streets, Lakewood, and Lake Highlands we spec period-appropriate replacements that match the original sightlines and shapes, then install to the written survey. Call (509) 265-6387 for a measured survey of your openings.
How do you price a custom window when there’s no stock size to compare in Dallas?
We price from the written survey: the shape, the glass package, the frame material, and the labor to set it in an opening that may have moved with the clay. The quote is the survey, and it doesn’t change after the fact. Call (509) 265-6387 to start.
Brands We Service in Dallas
We install and service windows and doors from CGI, CWS, ES Windows, and ECO Window Systems in Dallas, specified by what the opening requires rather than by what’s in stock. Parts and panels are ordered locally where available, with turnaround governed by the manufacturer’s schedule and the written survey. See our brands for the full line by performance tier.
Pricing for Windows & Doors in Dallas, TX
| Service | Typical range in Dallas |
|---|---|
| Single & Double Hung Windows | $350-$900 per window |
| Casement Windows | $550-$1,100 per window |
| Awning & Hopper Windows | $400-$950 per window |
| Impact-Resistant Windows | $600-$1,500 per opening |
| Hurricane Impact Windows | $700-$1,800 per opening |
| ENERGY STAR Replacement Windows | $400-$1,200 per window |
| Patio Doors | $1,200-$3,500 installed |
| Impact Sliding Glass Doors | $1,800-$4,500 installed |
| Garage Door Replacement | $1,500-$4,000 installed |
| Geometric & Shaped Windows | $800-$3,000 per window |
What pushes a Dallas price up is almost always the opening itself: an out-of-square rough opening from clay movement, a large-format impact unit on a storm-facing wall, or a custom shape that can’t be pulled from stock. The written price on the survey you keep is the price the crew installs to, and it’s issued before any work starts under Haven Clause 1.
Neighborhoods We Serve in Dallas
We install and replace windows and doors across Dallas, from the original wood-frame homes of M Streets and Lakewood to the brick-veneer spreads of Lake Highlands and Preston Hollow, and the newer infill in Uptown. Every neighborhood gets the same measured survey first, with the written price issued before a tool is lifted.
- M Streets
- Lakewood
- Lake Highlands
- Uptown
- Preston Hollow
Response time across Dallas is typically one to two business days for a measured survey once you call (509) 265-6387.
Service Area - Cities Near Dallas
Our Dallas-Fort Worth office schedules measured surveys for Dallas plus the surrounding cities in the metro. Homeowners in Irving, TX, Duncanville, TX, Mesquite, TX, and Lancaster, TX get the same written-price rule and documented photo record as every Dallas job.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Dallas
Window and door replacement in Dallas typically follows the city’s residential building code, and like-for-like replacements of the same size usually move through the permit process without structural review. Any opening that changes size, adds a header, or involves impact-rated anchoring may need a permit. We pull the permits and close them out with inspections passed, documented in your file. Call (509) 265-6387 and we’ll tell you what your specific openings need.
The expansive montmorillonite clay under most of Dallas moves your foundation seasonally, which means door and window frames can go out of square slowly over years or suddenly after a drought. The permanent fix is a combination of a properly installed opening and, where needed, a conversation about foundation stabilization before any hardware swap. Call (509) 265-6387 for a measured survey that reads the frame, not just the symptom.
We serve the full city of Dallas, including M Streets, Lakewood, Lake Highlands, Uptown, Preston Hollow, and the surrounding areas in Irving, Duncanville, Mesquite, and Lancaster. Scheduling is coordinated from our Dallas-Fort Worth office, and every job gets the same written price and photo record. Call (509) 265-6387 to schedule your free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Dallas Customers Say
"Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B."They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C."Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H.