Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterTherma-Tru Windows & Doors in Orlando, CA | Sightline Windows & Doors
We provide independent Therma Tru sales & service across Orlando. Sightline Windows & Doors is not manufacturer-affiliated or authorized by Therma-Tru. What separates our work here is simple: we measure against Orlando’s CBS housing stock and vacation-rental duty cycles every day, so the failures we catch are the ones a generic installer misses. Call (509) 265-6387 for a free estimate.
Why Orlando Residents Choose Us for Therma-Tru Service
Our team has spent years working on Classic-Craft, Smooth-Star, and Panorama series units installed in Central Florida’s concrete-block homes. We know which models hold up to Orlando’s ultraviolet exposure and which fail at the sill inside a decade. Sonia Raman, who grew up watching her grandfather reglaze Craftsman windows in Silver Lake and later studied building construction technology at LA Trade-Tech, built this company around a simple rule: measure once, write it down, then measure again. That discipline matters more in Orlando than almost anywhere, because CBS stucco walls and near-daily summer storms punish any imprecision in flashing, anchor placement, or sealant work. We show up with written pricing before a tool is lifted, and every visit leaves a documented photo record.
Common Therma-Tru Windows & Doors Problems We Solve in Orlando
- Bottom-rail delamination on fiberglass doors. Orlando’s acid-washed stucco runoff and irrigation overspray eat at the bottom rail on Classic-Craft and Smooth-Star doors. The fiberglass skin begins to separate from the core, and once moisture gets behind it, the damage spreads. We see this on CBS homes throughout Metrowest and Hunters Creek.
- Hidden sill rot from missing pan flashing. Smooth-Star doors without proper sill pans trap water under the threshold. Orlando’s summer thunderstorms push rain sideways into the opening, and the subfloor rots before the homeowner sees anything. We pull the casing, confirm the damage with photos, and rebuild with a pressure-treated buck on a sealed pan.
- Multipoint lock gearbox failures in vacation rentals. In the short-term-rental corridor from Kissimmee through ChampionsGate and Reunion Resort, Therma-Tru entry doors see near-commercial open/close cycles. Multipoint lock gearboxes and linkage hardware bind and strip on units only 8-12 years old. We rebuild them with OEM components where sealing matters.
- UV-stressed weatherstripping and frame sealant on Panorama patio doors. South-facing exposures in Orlando’s year-round UV index cause Panorama door panel sealant to crack and weatherstripping to lose compression. Air-infiltration and energy loss follow. We replace with high-durometer material matched to factory compression set where it counts.
- Therma-Tru Pulse Series hinge and sweep wear. Pre-2010 Pulse Series doors still hang throughout Orlando’s 1980s-2000s housing stock. Original single-pane sliders and aging entry hardware are common. In many cases the slab is sound and the fix is new sweeps, hinges, and multipoint parts, not a full replacement.
BeforeAfterTherma-Tru Service in Orlando: What Local Conditions Mean for Your Equipment
Here’s the fact most national Therma-Tru pages won’t tell you: Orlando’s inland location creates a widespread misconception that hurricane-rated windows and doors are optional. Florida Building Code mandates impact-resistant glazing or approved hurricane protection on all replacements throughout Orange County, and Florida’s property-insurance carriers are canceling or spiking premiums on homes with pre-2004 non-impact windows. That makes code-compliant replacement the primary sales conversation here in a way it simply isn’t in Georgia or the Carolinas. For Therma-Tru owners, the practical question is whether an existing door qualifies for wind mitigation credits, which changes the repair-versus-replace math entirely. We answer that question with measurements and documentation, not guesswork, because we know what Orange County inspectors will check.
Therma-Tru Models & Products We Service in Orlando
We service the Therma-Tru Classic-Craft Oak Collection, Smooth-Star Fiberglass Entry Doors, Panorama Patio Door Systems, and the pre-2010 Pulse Series. Our parts policy is straightforward: OEM Therma-Tru components for critical sealing and lock mechanisms, because aftermarket seals rarely meet factory compression set. For cosmetic or non-structural parts, we install high-durometer aftermarket equivalents that meet or exceed OEM spec. Our Orlando service vans carry common sweeps, hinges, multipoint gearboxes, rollers, and sealant matched to factory profiles, which keeps turnaround short on entry-door rebuilds and patio-door roller replacements. We also provide Orlando Door Installation for hurricane-proof front and entry doors, impact-resistant windows, and full frame replacements.
Therma-Tru Service Pricing in Orlando
Service calls in Orlando typically start at $89-$129. Entry-door multipoint lock rebuilds run $225-$575 depending on whether the gearbox or the full linkage is stripped. Fiberglass door repairs, including bottom-rail delamination repair and sealing, range from $350-$1,100. Patio door roller and track replacement runs $150-$450 per panel. Full Therma-Tru entry door replacement ranges from $3,200-$8,900 depending on slab material, glass package, and impact rating. Every estimate evaluates repair versus replace based on slab condition. Call (509) 265-6387 for a written quote, free of charge.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area, serving Orlando, FL, and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Therma-Tru Windows & Doors in Orlando
Bottom-rail delamination is rarely a storm failure; it’s a moisture-persistence failure. Acid-washed stucco runoff and irrigation overspray collect at the bottom rail on CBS homes, and Orlando’s humidity keeps the area damp long after each afternoon storm. The fiberglass skin loses its bond to the core over repeated wet-dry cycles, even on impact-rated slabs. We repair or replace the affected rail and re-seal with a high-durometer barrier. Call (509) 265-6387 for a quote.
Yes, under Florida Building Code replacement rules, new exterior doors in Orange County must be impact-rated or protected by approved shutters. But the more immediate reason for most Orlando homeowners is insurance. Carriers routinely require wind mitigation documentation before writing or renewing policies, and a non-impact door from the 1990s can trigger a premium spike or a non-renewal. We provide the written product specs and photo documentation insurers want. Call (509) 265-6387 to schedule a free estimate.
The almost universal cause in the Disney short-term-rental corridor is roller failure from duty cycles far beyond residential spec. Vacation-home doors see hundreds of open-close cycles a week, and the factory rollers wear flat, bind on the track, and then tear up the rail. We replace rollers and adjust the track, and we check the multipoint lock linkage at the same time, since the gearbox is usually next to fail on these units. Call (509) 265-6387 for a service quote.
You can, but the wood interior will move in Orlando’s humidity unless the door is sealed on all six sides before installation and the threshold is properly flashed. Many Classic-Craft doors in Orlando suffer from warping because the bottom edge was never sealed and storm water wicks up into the wood veneer. We specify full perimeter sealing and a sealed pan flashing as standard on every Classic-Craft install, and we document the work in the photo record we leave with you.
Not alone. Wind mitigation credits require documented impact-rated openings, and a single Smooth-Star door only addresses one opening. Most Orlando homes need an assessment of windows, garage door, and entry doors together to qualify for the full discount. That said, an impact-rated Smooth-Star door as part of a full opening upgrade does count toward the credit. We can provide the written spec sheet and installation photos your carrier will ask for. Call (509) 265-6387 for a free second opinion on any written estimate.
Service Areas Near Orlando
We serve Orlando and the surrounding Central Florida communities, including Kissimmee, Winter Park, Hunters Creek, Metrowest, Dr. Phillips, and the ChampionsGate and Reunion Resort corridor. For Therma-Tru work outside this area, see our Therma-Tru service in St. Petersburg page or our Therma-Tru service in Chula Vista page for coverage on the coasts.
Book Your Therma-Tru Service in Orlando Today
Call (509) 265-6387 to schedule a free estimate. We answer with a live person, we quote in writing before work starts, and we leave a photo record on every visit. Same-day scheduling is available for most Orlando repair calls.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Orlando since 2012.