Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Spring, TX
Window and door work in Spring, TX usually comes down to one of two realities: original 1970s and 1980s aluminum single-pane windows that have fogged, warped, or corroded in relentless Gulf Coast humidity, or Hurricane Harvey damage along Spring Creek that left hidden rot in sills and rough openings. Full-frame replacement is the norm here, not the exception, because pulling an old unit often exposes what the insert-only quote never accounted for. We write the price down before any work starts and document every opening with photos when the job is done. Call (509) 265-6387 to schedule a measured survey.
Why Spring Homes Are Different
Spring sits in unincorporated Harris County, which means window and door permits come from the county, not a city building department. A lot of homeowners assume no permit is required at all, and plenty of crews never mention it. That assumption creates real liability when a job goes wrong. We pull the county permit on every structural opening and the paperwork is part of the written scope you keep.
The housing stock compounds the problem. The core of Spring is dense wood-frame tract subdivisions built between roughly 1972 and 1995, still carrying original aluminum slider windows and hollow-core entry doors. Those units are now 30 to 50 years old. The combination of 95°F-plus heat indexes, near-100% summer humidity, and intense UV from a near-equatorial sun angle destroys IGU seals within 10 to 15 years. Fogged double-pane units and failed door weatherstripping are among the most common service calls we see across Spring. Homes near Spring Creek’s 100-year floodplain carry an additional risk: concealed sill-plate rot that only surfaces once the old window is pulled, turning a quoted insert job into a full structural rough-opening repair. That is why we write full-frame scope lines into the quote when the survey indicates it.
Our Main Spring Services
When Spring homeowners call us, the conversation almost always starts with one of two projects: a door that no longer seals, or windows that have failed beyond repair.
Door Installation in Spring
Front doors in Spring’s original tract homes were often builder-grade hollow-core units that have spent four decades absorbing humidity. Warped slabs, rusted hinges, and frames that no longer sit square are routine findings. Entry doors in particular need attention because a sagging door is also a security weakness and an air-leak that drives cooling bills up. The full scope of Door Installation in Spring covers the measured survey, the written quote, the permit, the install, and the documented photo record when we finish. Impact-rated doors are a common request in flood-adjacent neighborhoods, and Therma-Tru lines give us options from basic steel to fiberglass with rot-resistant frames.
Window Replacement in Spring
The defining Spring window job is tearing out a 1970s or 1980s aluminum single-pane unit and discovering the rough opening is not square, the sill has rot, or the flashing was never done correctly in the first place. That is why full-frame replacement is standard here. The detailed scope for Window Replacement in Spring explains the process from survey to written quote, and we stock replacement parts for the most common aluminum and vinyl systems found across Spring’s subdivisions. The fixed price we write on the survey document is the price on the invoice, with no change orders when the opening reveals damage we already scoped.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterWindow Installation in Spring
Window installation in Spring means replacing original aluminum single-pane units in 1970s and 1980s tract homes, where decades of Gulf humidity have corroded frames and failed seals. We measure every opening, write the full-frame scope and price before any work starts, and pull the Harris County permit the job requires. This is the core of our Window Installation work here, and it starts with the measured survey you keep.
Single & Double Hung Windows
Signs you need it
Sashes that won’t stay up, visible corrosion on the frame, or condensation between the panes means the original aluminum unit has reached the end of its service life.
What it costs in Spring
Single and double hung windows in Spring typically run $450 to $1,200 per opening installed, depending on glass package and whether full-frame work is required.
How we do it
We remove the old unit down to the rough opening, inspect and repair the sill plate if needed, install the new hung window with flashing, insulate the perimeter, and trim out with a weather-sealed finish.
Horizontal Roller Windows
Signs you need it
A roller window that binds, has a shattered track, or lets daylight through the corners is failing and the aluminum frame is likely warped beyond adjustment.
What it costs in Spring
Horizontal roller window replacement in Spring typically runs $400 to $1,000 per opening installed, with full-frame replacement pushing toward the upper end.
How we do it
We pull the complete frame, square and seal the rough opening, install the new roller unit, and document the finished opening with photos you receive.
What Window Installation Costs in Spring
| Item | Typical range in Spring |
|---|---|
| Single or double hung window (installed) | $450 - $1,200 |
| Horizontal roller window (installed) | $400 - $1,000 |
| Casement window (installed) | $700 - $1,800 |
Does window installation in Spring require a permit?
Yes. Spring is unincorporated Harris County, so window permits come from the county, not a city. We pull the permit on every structural opening, and the permit number is part of your written scope.
Will the price change once work starts?
No. The price we write on the measured survey is the price on the final invoice. That is the point of Haven Clause 1: the measurement and the quote are the same document. Call (509) 265-6387 for an exact quote.
Impact Windows & Doors in Spring
Impact windows and doors in Spring protect homes from windborne debris during hurricane season, and they also solve a quieter problem: original aluminum single-pane windows that would not survive a serious storm. Homes near Spring Creek and the 100-year floodplain carry extra exposure risk. Our Impact Windows & Doors work here starts with a measured survey and a written price, including the wind-load documentation the county permit requires.
Impact-Resistant Windows
Signs you need it
If your windows are original single-pane aluminum, or you are in a windborne-debris zone, impact-rated glass is the difference between a window that holds and one that shatters.
What it costs in Spring
Impact-resistant windows in Spring typically run $900 to $2,400 per opening installed, depending on size and the specific impact rating.
How we do it
We remove the old unit, verify the rough opening dimensions, install the impact-rated frame and laminated glass, and provide the product approval documentation for your records.
Hurricane Impact Windows
Signs you need it
Homes built before 2001 rarely have impact glazing, and Harvey showed what happens when wind-driven debris meets single-pane glass near Spring Creek.
What it costs in Spring
Hurricane-rated impact windows in Spring typically run $1,000 to $2,800 per opening, with larger openings and higher design pressures at the upper end.
How we do it
We specify PGT or CGI products by the wind-load chart, install to the manufacturer’s tested assembly, and leave you with the Florida-style product approval documents Harris County reviewers expect.
What Impact Windows & Doors Costs in Spring
| Item | Typical range in Spring |
|---|---|
| Impact-resistant window (installed) | $900 - $2,400 |
| Hurricane impact window (installed) | $1,000 - $2,800 |
| Impact sliding glass door (installed) | $2,500 - $6,000 |
Do impact windows qualify for insurance discounts in Spring?
Many Texas insurers offer premium reductions for documented impact-rated openings. We provide the product approval paperwork you need, and we can review your written policy language before install. Call (509) 265-6387 to discuss your specific opening.
Are impact windows worth it if I’m not on the coast?
For Spring homes near Spring Creek or with original single-pane glass, yes. Impact windows hold the building envelope together in a storm and eliminate the need for plywood or shutters.
Energy-Efficient Windows in Spring
Energy-efficient windows in Spring fight the real enemy: a cooling season that runs from April through October with heat indexes above 95°F and humidity that never lets the building dry out. Original aluminum frames conduct heat straight into the house, and failed IGU seals mean the glass does almost nothing. Our Energy-Efficient Windows work in Spring spec’s Low-E coatings and insulated frames by U-factor and SHGC, with the written price first.
Low-E & Argon Gas Glass
Signs you need it
If rooms on the south and west sides of your Spring home are 8 to 10 degrees hotter than the rest of the house, your existing glass has almost no meaningful solar control left.
What it costs in Spring
Low-E with argon gas fill in Spring typically adds $150 to $400 per window over standard glass, installed.
How we do it
We specify the Low-E coating and argon fill by the opening’s solar orientation, then install the insulated unit into a properly flashed and sealed frame.
ENERGY STAR Replacement Windows
Signs you need it
Aluminum windows from the 1970s and 1980s have no thermal break and no modern Low-E coating, so they are effectively holes in the building envelope during a Spring summer.
What it costs in Spring
ENERGY STAR replacement windows in Spring typically run $500 to $1,300 per opening installed, depending on frame material and glass package.
How we do it
We install a full-frame replacement with an insulated frame, Low-E glass, and a documented U-factor and SHGC specific to your home’s orientation.
What Energy-Efficient Windows Costs in Spring
| Item | Typical range in Spring |
|---|---|
| Low-E + argon glass upgrade (per window) | $150 - $400 |
| ENERGY STAR replacement window (installed) | $500 - $1,300 |
| Insulated laminated glass (installed) | $800 - $1,900 |
What U-factor and SHGC should I target in Spring?
For cooling-dominated Harris County, a U-factor at or below 0.30 and an SHGC at or below 0.25 is the right target for most openings. We write the actual spec into your quote.
How fast will I see the difference on my electric bill?
Most Spring homeowners notice the change in the first full cooling season, with the biggest difference in south and west-facing rooms. Call (509) 265-6387 for a measured survey and written recommendation.
Sliding & Patio Doors in Spring
Sliding glass doors in Spring’s original tract homes are usually 1970s or 1980s aluminum units whose rollers have ground flat and whose tracks have corroded in the humidity. The door still sits in the opening, but it no longer seals, and in flood-adjacent neighborhoods near Spring Creek the sill is often hiding rot. Our Sliding & Patio Doors work in Spring starts with a measured survey and a written price that includes whatever the opening actually needs.
Sliding Glass Door Replacement
Signs you need it
A slider that takes two hands to move, has visible daylight under the panel, or has a track that fills with water in a hard Spring rain is done.
What it costs in Spring
Sliding glass door replacement in Spring typically runs $1,500 to $3,500 installed, depending on size and frame material.
How we do it
We remove the old frame down to the rough opening, inspect and repair the sill if Harvey or humidity left rot, then install the new slider with a full weather seal.
Impact Sliding Glass Doors
Signs you need it
Original patio sliders with single-pane glass offer almost no windborne-debris protection, and they are often the largest unprotected opening in a Spring home.
What it costs in Spring
Impact sliding glass doors in Spring typically run $2,500 to $6,000 installed, with larger openings and higher design pressures at the upper end.
How we do it
We install a PGT or CGI impact-rated slider with laminated glass, test the operation, and provide the product approval documentation for your insurance and county records.
What Sliding & Patio Doors Costs in Spring
| Item | Typical range in Spring |
|---|---|
| Sliding glass door replacement (installed) | $1,500 - $3,500 |
| Impact sliding glass door (installed) | $2,500 - $6,000 |
| Screen door installation | $150 - $400 |
Why does my patio door stick in summer but not winter?
Aluminum expands in heat, and 95°F-plus Spring afternoons push an old frame out of square. The fix is a full replacement, not a track adjustment. Call (509) 265-6387 and we’ll measure it.
Can you match my HOA’s required patio door style?
Yes. We work with HOA design committees across Spring’s master-planned sections and will provide the spec sheets and finish samples your board needs before install.
Impact Garage Doors in Spring
The garage door is usually the largest opening in a Spring home, and on original 1980s tract houses it’s often a lightweight, unreinforced pan door that a windstorm will fold. Homes near Spring Creek learned this during Harvey. Our Impact Garage Doors work here includes wind-load code compliance, reinforced track systems, and a written price before any work begins.
Hurricane-Rated Garage Doors
Signs you need it
If your garage door is original to a 1970s or 1980s home and has no reinforcement rail, it will not survive a design-level wind event at the ridge.
What it costs in Spring
Hurricane-rated garage doors in Spring typically run $2,000 to $5,500 installed, depending on size, insulation, and wind-load rating.
How we do it
We install a reinforced door and track system rated for Harris County wind loads, with the product approval documents included in your records.
Energy-Efficient Garage Doors
Signs you need it
An uninsulated metal garage door turns a Spring garage into a furnace that bleeds heat into adjacent rooms.
What it costs in Spring
Energy-efficient insulated garage doors in Spring typically run $1,800 to $4,500 installed, depending on R-value and finish.
How we do it
We replace the door with an insulated steel unit, install new weather seals at the jambs and header, and adjust the tracks for a clean close.
What Impact Garage Doors Costs in Spring
| Item | Typical range in Spring |
|---|---|
| Hurricane-rated garage door (installed) | $2,000 - $5,500 |
| Energy-efficient insulated garage door (installed) | $1,800 - $4,500 |
| Garage door replacement (standard, installed) | $1,200 - $2,800 |
Do I need a permit to replace my garage door in Spring?
Yes, when the opening is structural or the track system changes. We pull the Harris County permit and include the permit number in your written scope.
Will an impact garage door lower my insurance premium?
Many insurers in Harris County apply wind-mitigation credits for documented impact-rated garage doors. We provide the paperwork your carrier needs. Call (509) 265-6387 for a written estimate.
Custom & Geometric Windows in Spring
Custom and geometric windows in Spring are typically found in the 1990s and 2000s sections where builders added arched transoms, half-rounds, and angled openings as architectural accents. Those units are now 20 to 35 years old, and the seal failures show up first at the curves. Our Custom & Geometric Windows work here matches the radius and profile exactly, then documents the install with photos.
Geometric & Shaped Windows
Signs you need it
A fogged half-round or trapezoid window over a Spring entry has failed the same way as any other IGU, but the odd shape makes the replacement a custom order.
What it costs in Spring
Geometric and shaped windows in Spring typically run $700 to $2,000 installed, depending on the complexity of the shape and the glass package.
How we do it
We template the existing opening, order the custom unit to the exact radius and angle, and install it into a properly flashed rough opening.
Arched & Curved Windows
Signs you need it
Arched windows in Spring’s 1990s colonial-style sections are prone to seal failure at the curve, where the IGU flexes and the spacer bar eventually gives way.
What it costs in Spring
Arched and curved window replacement in Spring typically runs $900 to $2,400 per opening installed, with true half-rounds at the upper end.
How we do it
We measure the radius with a full-size template, order from a manufacturer that can hit the curve, and install with matching trim and flashing.
What Custom & Geometric Windows Costs in Spring
| Item | Typical range in Spring |
|---|---|
| Geometric or shaped window (installed) | $700 - $2,000 |
| Arched or curved window (installed) | $900 - $2,400 |
| Oversized custom opening (installed) | $1,500 - $4,000 |
Can you match the exact curve of my existing arched window?
Yes. We template every curved opening in place, so the replacement unit matches the radius rather than approximating it. Call (509) 265-6387 and we’ll measure it.
How long does a custom geometric window take?
Most custom shapes in Spring arrive in 3 to 6 weeks from order to install because the unit is cut to a template, not pulled from stock.
Brands We Service in Spring
We install and service PGT, CGI, CWS, and ES Windows product lines across Spring, with parts stocked for the most common aluminum and vinyl systems in the area. Turnaround on replacement parts is typically 5 to 10 business days. See our brands for the full specification by performance tier and price range.
Pricing for Windows & Doors in Spring, TX
| Service | Typical range in Spring |
|---|---|
| Single or double hung window (installed) | $450 - $1,200 |
| Horizontal roller window (installed) | $400 - $1,000 |
| Impact-resistant window (installed) | $900 - $2,400 |
| ENERGY STAR replacement window (installed) | $500 - $1,300 |
| Sliding glass door replacement (installed) | $1,500 - $3,500 |
| Impact sliding glass door (installed) | $2,500 - $6,000 |
| Hurricane-rated garage door (installed) | $2,000 - $5,500 |
| Geometric or shaped window (installed) | $700 - $2,000 |
What pushes a Spring job toward the top of these ranges is almost always the same thing: hidden sill-plate rot or a rough opening that is out of square once the old unit comes out. That is why the written price from our measured survey already accounts for the full-frame work, so there is no change order after tear-out.
Neighborhoods We Serve in Spring
Our crews work throughout Spring, from the original 1970s oil-boom subdivisions to the newer master-planned sections along the Grand Parkway corridor. Response time for scheduled surveys is typically within 2 to 4 business days across the Spring area.
- Klein
- Spring Creek Oaks
- Windrose
- Gleannloch Farms
- Bridgestone
Service Area - Cities Near Spring
We also serve Houston, TX, Cypress, TX, and Channelview, TX with the same written-price-before-work policy and documented photo record. For homeowners looking for window and door work in the Pasadena, CA market, we coordinate the same Haven Standard approach through our network.
Serving Spring, TX - Our Local Coverage Area
We’re based in the Spring area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Spring
Yes. Spring is unincorporated Harris County, so permits come from the county. Many homeowners and even some crews assume no permit is required, but structural openings do require one. We pull the permit and include the number in your written scope.
Many of Spring’s 2000s and 2010s master-planned sections have architectural review committees that restrict frame colors, grid patterns, and sometimes frame materials. We provide the spec sheets and finish samples your board needs, and we’ll note the HOA requirement in the written quote.
How do I get an exact price for my Spring home?
Call (509) 265-6387 to schedule a measured survey. The survey document you keep is the same document that sets your price, and that price does not change once work starts. Estimates are always free, and we will review any competitor’s written quote at no charge.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Spring Customers Say
"Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B."They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C."Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H.