Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Pasadena, CA
Window installation in Pasadena is not a simple swap-out job. Half a century of petrochemical corridor air has oxidized original aluminum frames down to bare metal, and non-standard rough openings from the 1950s-1970s building boom mean most openings require measured fabrication rather than a boxed stock unit. We write a fixed price from a measured survey before any tool is lifted. Call (509) 265-6387 to schedule yours.
Why Pasadena Homes Are Different
Pasadena sits directly against the Houston Ship Channel’s refinery belt, and the air here carries hydrogen sulfide and chlorine compounds that eat window seals, aluminum finishes, and door hardware faster than anywhere else in the region. That is not a generalization; east of Shaver Street and along the Spencer Highway corridor, we routinely pull aluminum frames with the finish oxidized through to bare metal, and door sills showing corrosion rot on homes that never flooded. Material selection matters here in a way it simply does not in Sugar Land or Pearland.
The housing stock compounds the issue. Most Pasadena homes are tract houses built between roughly 1955 and 1975, with original single-pane aluminum windows now 50-70 years old. Mid-century framing practices produced rough openings that vary by the half-inch, which is why we measure every opening and fabricate units to fit the actual dimensions.
Our Main Pasadena Services
Two jobs dominate the calls we get from Pasadena homeowners: full door replacement on corroded entry frames, and whole-home window replacement on failed mid-century units. Each gets its own detailed page because each has distinct material and code considerations here.
Door Installation in Pasadena
Entry and exterior door frames in Pasadena fail from the bottom up, with chemical-laden humidity attacking the sill first. We replace the entire frame and slab as a system, not just re-hang a slab on a rotted jamb. Every door job includes a written price before work starts and a documented photo record when the opening is finished. Door Installation in Pasadena explains what we replace, what it costs, and what to expect on a mid-century frame.
Window Replacement in Pasadena
Original aluminum single-panes in 1950s-1970s tract homes are long past service life, and the window industry does not make a drop-in replacement for most of these rough openings. We measure, fabricate, and install with a fixed price that cannot change during the job. Window Replacement in Pasadena breaks down the process and the price points for typical Pasadena homes.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterWindow Installation in Pasadena
Window installation in Pasadena is a measured fabrication job more often than a stock replacement. The original aluminum single-pane units in most of these 1950s-1970s tract homes sit in rough openings that vary enough that standard-size windows will not seal correctly, and the local air has already oxidized those old frames beyond salvage. Our Window Installation process starts with a measured survey you keep, so the written quote and the as-built dimensions are the same document. Here are the window types we install most in Pasadena.
Single & Double Hung Windows
Signs you need it
Sashes that refuse to stay open, visible corrosion on the aluminum track, or condensation trapped permanently between panes are the common failure points on Pasadena’s original units.
What it costs in Pasadena
Single and double hung window installation in Pasadena typically runs $450-$1,200 per opening depending on size, frame material, and glass package.
How we do it
We measure each rough opening, order the sash package to fit those dimensions, remove the old frame back to the studs, install new flashings and pan flashing, set the window, and close it with new interior trim.
Horizontal Roller Windows
Signs you need it
Rollers that grind or jump the track, frames that have oxidatively swollen enough to bind the sash, and cracked corner welds are the usual failure signs.
What it costs in Pasadena
Horizontal roller window installation in Pasadena typically falls between $400-$1,000 per opening, with larger multi-track units running higher.
How we do it
We remove the old frame, true up the opening, install a new roll-form or fabricated frame with stainless rollers, set flashing and sealant, and re-install interior casing where the old material has delaminated.
What Window Installation Costs in Pasadena
| Item | Typical range in Pasadena |
|---|---|
| Single hung window | $450-$900 |
| Double hung window | $550-$1,200 |
| Horizontal roller window | $400-$1,000 |
Do window installs in Pasadena need permits?
Most window replacements are treated as repairs under city code, and we handle any required paperwork. If the opening changes size, a permit is more likely. Call (509) 265-6387 and we will tell you what applies to your specific house.
How long does window installation take in Pasadena?
Most Pasadena jobs run two to five days from first tear-out to final trim. Fabrication lead time is usually the longer wait, not the installation. A written timeline is part of your quote.
Impact Windows & Doors in Pasadena
Impact windows and doors in Pasadena serve a double role: they resist wind-borne debris during hurricane season and they resist the chemical-laden air that corrodes standard frames. The refinery corridor’s airborne sulfides and chlorides attack aluminum and steel hardware aggressively, which is why impact-rated units with stainless fasteners get specified here far more than someone’s inland based solely on storm risk. Our Impact Windows & Doors line covers the full Pasadena requirement set. These are the two most requested sub-jobs.
Impact-Resistant Windows
Signs you need it
If your original windows are single-pane aluminum, you have no glazing that would stop wind-borne debris, and the frames themselves are now oxidizing to failure from refinery emissions.
What it costs in Pasadena
Impact-resistant window installation in Pasadena typically runs $900-$2,500 per opening depending on size, glass package, and frame material.
How we do it
We spec a laminated glass make-up appropriate for your wind zone, measure each opening, remove the existing frame, install a corrosion-resistant frame (vinyl or treated aluminum) with stainless hardware, and set the glazing.
Horizontal Roller & Sliding Impact Windows
Signs you need it
Sliding windows with blown seals or corroded roller assemblies cannot be hardened in place, so replacement is the only route to impact resistance on these openings.
What it costs in Pasadena
Impact-rated horizontal roller windows in Pasadena typically cost $900-$2,200 per opening depending on track configuration and low-E glass choice.
How we do it
We pull the old framed unit, square the rough opening, set the new impact-rated frame with structural fasteners and flashings, then lay in the laminated sashes.
What Impact Windows & Doors Costs in Pasadena
| Item | Typical range in Pasadena |
|---|---|
| Impact-resistant window | $900-$2,500 |
| Impact sliding window | $900-$2,200 |
| Impact door (entry or patio) | $1,800-$5,000 |
Are impact windows required in Pasadena?
Current Pasadena building code does not mandate impact glazing on all homes, but this city’s wind zone and chemical exposure make it a functional necessity. Your insurance carrier may also require it before they write a policy. Call (509) 265-6387 to talk through the requirement for your specific property.
Will impact windows stop the corrosion problem Pasadena has?
Impact-rated frames and stainless hardware resist the refinery-corridor air far better than original aluminum. The frame material and fastener spec matter as much as the laminated glass package. Vinyl and treated aluminum are our standard Pasadena specifications.
Energy-Efficient Windows in Pasadena
Energy-efficient windows in Pasadena are a necessity driven by the local air before they are a comfort upgrade. High Gulf Coast humidity fights modern sealants, intense UV load degrades weatherstripping on a compressed timeline, and the original mid-century single-panes have none of the insulating performance that current utility rates demand. Our Energy-Efficient Windows work here starts with a measured survey and a written U-factor and SHGC target for your specific orientation. Here are the two most common Pasadena sub-jobs.
Low-E & Argon Gas Glass
Signs you need it
Pasadena’s original single-pane windows have no low-E coating and no gas fill at all, which shows up as rooms that never cool and utility bills that overshoot what your neighbors report.
What it costs in Pasadena
Low-E with argon gas glass packages in Pasadena typically add $150-$400 per window over a standard insulated unit, depending on size and coating spec.
How we do it
We spec the low-E coating for your orientation, confirm the argon fill percentage on the glass order, fabricate the sealed unit, and install it inside a frame that actually seals against Pasadena humidity.
ENERGY STAR Replacement Windows
Signs you need it
Homes with the original 1950s-1970s aluminum single-panes are the main candidates, since those units fail the ENERGY STAR performance bar for the Gulf Coast climate zone by a wide margin.
What it costs in Pasadena
ENERGY STAR replacement windows in Pasadena typically run $500-$1,400 per opening for standard sizes, depending on glass package and frame material.
How we do it
We confirm the U-factor and SHGC targets for your climate zone, pick a frame-and-glass package that hits them, and install with modern flashing and sealant practices.
What Energy-Efficient Windows Costs in Pasadena
| Item | Typical range in Pasadena |
|---|---|
| Low-E glass upgrade | $150-$400 per window |
| ENERGY STAR replacement window | $500-$1,400 |
| Insulated laminated glass | $700-$1,800 |
What U-factor makes sense for Pasadena’s climate?
For Gulf Coast climate zones, a U-factor of 0.30 or lower and an SHGC around 0.25 is the working starting point most Pasadena homes need. We will calculate the exact specification for your orientation. Call (509) 265-6387 for a written quote.
Can new windows offset Pasadena’s chemical exposure?
No window eliminates refinery emissions, but a properly selected vinyl or fiberglass frame with modern compression seals lasts far longer than the original aluminum. The glazing and frame material work together against both humidity and chemical fallout.
Sliding & Patio Doors in Pasadena
Sliding and patio doors in Pasadena fail from the bottom track up, because the same refinery-corridor air that oxidizes window frames also attacks door sills and roller assemblies. We replace the entire door system, not just the panel, and the written price you get before the job starts is the price on the final invoice. Our Sliding & Patio Doors work covers everything from basic slider swaps to impact-rated units. These are the two sub-jobs Pasadena homeowners ask for most.
Patio Doors
Signs you need it
A sill that has softened or rotted, a panel that drags or catches, and visible corrosion on the roller track are the three Pasadena indicators that a patio door is done.
What it costs in Pasadena
Patio door replacement in Pasadena typically runs $1,500-$4,500 depending on size, glass package, and whether the frame is vinyl or aluminum.
How we do it
We remove the old frame and panel, inspect and repair the rough opening and sub-sill, set the new frame with flashing and sealant, install the panel, and adjust the rollers for a clean glide.
Impact Sliding Glass Doors
Signs you need it
If the existing slider is original to the house, it is not impact-rated and its frame and track are already corroding, so replacement is the only practical path to a storm-rated opening.
What it costs in Pasadena
Impact sliding glass doors in Pasadena typically cost $2,500-$6,000 per opening, including the laminated glass panel and reinforced frame.
How we do it
We measure the opening, spec a laminated impact panel, remove the existing door system, install the original frame with structural fasteners, seal the perimeter, and set the panel in stainless rollers.
What Sliding & Patio Doors Costs in Pasadena
| Item | Typical range in Pasadena |
|---|---|
| Standard patio door | $1,500-$4,500 |
| Impact sliding glass door | $2,500-$6,000 |
| Screen door installation | $150-$400 |
Can you replace just the patio door panel in Pasadena?
Sometimes, but on original mid-century units the frame is usually too far gone. We will tell you what the measured survey shows before you commit to anything. Call (509) 265-6387 for an estimate.
Why do Pasadena door sills rot on homes that never flooded?
The chemical-laden air from the Ship Channel corridor condenses at the sill line, and repeated wet-dry cycles break down wood and aluminum over decades. Proper flashing and corrosion-resistant materials are the remedy.
Impact Garage Doors in Pasadena
Impact garage doors in Pasadena solve a real problem most homeowners do not see: the original garage door is the largest opening in the house, and on many mid-century tract homes here it is a thin aluminum panel with a rusted track and no wind-load rating at all. The same refinery air that damages windows attacks garage door hardware year-round. Our Impact Garage Doors service covers the replacement and code-compliance work Pasadena homes typically need.
Hurricane-Rated Garage Doors
Signs you need it
If your garage door flexes more than an inch under wind load or the panels show visible corrosion along the bottom rail, it is not doing what a storm-rated Pasadena garage door should.
What it costs in Pasadena
Hurricane-rated garage door installation in Pasadena typically runs $1,800-$4,500 depending on size, track gauge, and reinforcement package.
How we do it
We measure the opening and wind zone, spec a reinforced panel and track package, remove the old door and operator mounts, set the new door with galvanized tracks, and test the balance.
Garage Door Replacement
Signs you need it
Rusted springs, a track that binds, panels that have corroded through, and a door that no longer balances are all full-replacement indicators on Pasadena’s original mid-century units.
What it costs in Pasadena
Garage door replacement in Pasadena typically runs $1,200-$3,500 for a standard two-car door, before impact upgrades.
How we do it
We remove the old door and hardware, inspect and reinforce the header and jambs, install the new door with galvanized tracks and stainless fasteners, and mount the operator back on a solid base.
What Impact Garage Doors Costs in Pasadena
| Item | Typical range in Pasadena |
|---|---|
| Hurricane-rated garage door | $1,800-$4,500 |
| Standard garage door replacement | $1,200-$3,500 |
| Wind-load code compliance work | $400-$1,200 |
Does Pasadena require wind-load-rated garage doors?
Current code requires new garage doors here to meet a wind-load rating tied to your specific exposure. We handle the compliance paperwork and spec the right door for your address. Call (509) 265-6387 to confirm what applies to your property.
Will an impact garage door survive Pasadena’s chemical air?
Galvanized tracks and stainless fasteners hold up far better than the original zinc-plated hardware. The door panel material matters too; we spec corrosion-resistant panels for refinery-adjacent neighborhoods.
Custom & Geometric Windows in Pasadena
Custom and geometric windows in Pasadena usually start because someone’s original 1950s-1970s picture window or half-round accent has finally failed and no stock unit exists in the right shape. The older Pasadena tracts are full of non-standard openings that were site-framed, so a replacement has to be fabricated to measure. Our Custom & Geometric Windows work handles those openings with the same fixed written price as every other job.
Geometric & Shaped Windows
Signs you need it
Condensation trapped between panes, visible glazing compound failure, or frame corrosion around a non-standard opening are the common Pasadena failure signs on shaped windows.
What it costs in Pasadena
Geometric and shaped window fabrication in Pasadena typically runs $800-$2,500 per opening depending on shape complexity and glass package.
How we do it
We template the exact opening shape, send the template to the fabricator, build a new frame to the template, install the sealed glazing unit, and flash the rough opening.
Oversized Openings
Signs you need it
Original picture windows with failed seals or corroded frames on wide openings are the main candidates, since stock units in these sizes rarely fit mid-century rough openings.
What it costs in Pasadena
Oversized window replacement in Pasadena typically runs $1,000-$3,500 per opening depending on span, glass spec, and whether structural support needs to be added.
How we do it
We measure the full span, determine whether the header needs any reinforcement, fabricate the glazing to fit, remove the old frame, and install the new unit with proper support and flashing.
What Custom & Geometric Windows Costs in Pasadena
| Item | Typical range in Pasadena |
|---|---|
| Geometric or shaped window | $800-$2,500 |
| Oversized replacement window | $1,000-$3,500 |
| Custom impact window | $1,200-$3,000 |
Can you match an original Pasadena mid-century window shape?
Yes. We template the existing opening and fabricate a new unit to the exact shape, including half-round, arch-top, and trapezoid forms. Call (509) 265-6387 with the dimensions and we will price it from the template.
How long does a custom geometric window take in Pasadena?
Template measurement takes one visit, and fabrication typically runs three to six weeks depending on shape and glass. We confirm the production timeline in writing before any money changes hands.
Brands We Service in Pasadena
We specify PGT, CWS, and ES Windows on most Pasadena jobs because their impact and corrosion-resistant lines work for this air. Parts for common models are stocked in our Los Angeles warehouse, not ordered blind. See our brands for the full manufacturer list and what each line does best.
Pricing for Windows & Doors in Pasadena, CA
| Service | Typical range in Pasadena |
|---|---|
| Single hung window | $450-$900 |
| Double hung window | $550-$1,200 |
| Horizontal roller window | $400-$1,000 |
| Impact-resistant window | $900-$2,500 |
| ENERGY STAR replacement window | $500-$1,400 |
| Patio door | $1,500-$4,500 |
| Impact sliding glass door | $2,500-$6,000 |
| Hurricane-rated garage door | $1,800-$4,500 |
| Geometric or shaped window | $800-$2,500 |
| Oversized replacement window | $1,000-$3,500 |
Two things push prices up in Pasadena: non-standard rough openings from mid-century construction, which force custom fabrication, and corrosion-resistant material upgrades, which are the right call in this air and cost a bit more than standard finishes. Whatever the number ends up being, it is the same number on the measured survey and the final invoice.
Neighborhoods We Serve in Pasadena
We work across the full Pasadena footprint, from the older tracts east of Shaver Street to the neighborhoods along Spencer Highway and everything in between. Response time for a free estimate anywhere in Pasadena is usually within a few business days; live phone coverage is available 24/7.
- Shaver Street corridor
- Spencer Highway area
- South Pasadena
- Vista Villas
- Red Bluff Terrace
Service Area - Cities Near Pasadena
We serve Pasadena homeowners across the full metro footprint, coordinating dispatch and scheduling from our Los Angeles office. Our crews also cover South Pasadena, CA, Altadena, CA, San Gabriel, CA, and Alhambra, CA.
Serving Pasadena, CA - Our Local Coverage Area
We’re based in the Pasadena area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Pasadena
Free estimates anywhere in Pasadena are usually scheduled within a few business days, and live phone coverage means a person answers at any hour. Call (509) 265-6387 to book a measured survey at your address.
Some neighborhoods have covenants that affect what materials or colors are allowed on street-facing openings. We will ask about your HOA during the survey and note any restrictions on your written scope before pricing is final.
Not materially. Standard replacements usually move quickly; opening-size changes take longer. We pull the permit when one is required, and the timeline is part of your written quote.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pasadena Customers Say
"They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C."Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H."Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T.