Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Temple City, CA
Window installation in Temple City usually means replacing original single-pane aluminum frames in ranch homes built between the late 1940s and mid-1960s, and the job almost always involves custom shimming for openings that have settled out of square. We write the price before any work starts, on the same measured survey you keep, so there is no second number later. Call (509) 265-6387 for a free estimate, or read through the six service sections below for precise Temple City pricing.
Why Temple City Homes Are Different
Temple City sits in Climate Zone 10, not the coastal Zone 6 or 7 that shapes most LA window marketing. That matters in dollars: Title 24 enforces stricter Solar Heat Gain Coefficient limits here, which means a window spec that passes in Santa Monica will fail Temple City inspection. Summer highs regularly push past 100°F and run 15 to 25 degrees hotter than the coast, so aging single-pane aluminum frames degrade faster and transmit more heat into living space than the same window would in a coastal zip code.
The housing stock compounds it. Most Temple City homes are post-WWII ranch and minimal traditional tract builds on slab or raised foundations. After sixty to seventy-five years, the rough openings have drifted. A standard retrofit unit often will not seat correctly in an opening that has settled a quarter inch out of square, especially on door replacements, where the margin for error is tighter. Santa Ana wind events dry out door sweeps and threshold seals and pack fine San Gabriel Valley dust into sliding door tracks. None of this is exotic; it is just what the homes here do.
Our Main Temple City Services
Most Temple City homeowners call us about two things: doors that no longer close square in settled openings, and windows that have outlived their seals and their Title 24 compliance. Each service has its own Temple City page with full pricing and job detail.
Door Installation in Temple City
Door replacement in Temple City is less about the door slab and more about the rough opening. Six decades of settling on slab and raised foundations leaves jambs that are rarely square, so we measure, shim, and re-frame as needed before the new unit goes in. A door installed to original opening dimensions, without correcting the drift, will bind within a year. See Door Installation in Temple City for costs, door types, and what the measured survey covers.
Window Replacement in Temple City
Window replacement here starts with Climate Zone 10 compliance, because a window that meets coastal SHGC limits will not pass Temple City inspection. Beyond code, the practical problem is heat: original aluminum single-panes from the 1950s and 60s conduct solar gain directly into the room. Replacing them with properly specified low-E units changes the indoor temperature in a way you can notice the first afternoon it hits 100°F. See Window Replacement in Temple City for the full breakdown.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterWindow Installation in Temple City
Window installation in Temple City solves a specific problem: original single-pane aluminum frames from the late 1940s through mid-1960s that leak heat into 100°F rooms and fail today’s Climate Zone 10 SHGC requirements. Most of these homes were built as ranch or minimal traditional tracts, and after sixty-plus years the rough openings have settled, so a genuinely square install is the exception, not the rule. We shim, re-frame when needed, and spec glass to the inland heat load rather than a coastal default. This job falls under our Window Installation service line.
Single & Double Hung Windows
Signs you need it
The sash rattles in the jamb, the lower pane sticks when you try to raise it, and you can feel heat radiating through the glass on summer afternoons.
What it costs in Temple City
Expect $400 to $950 per window installed in Temple City, depending on framing condition and glass package.
How we do it
We remove the old sash and frame, square the rough opening with shims, set the new unit, and seal the exterior perimeter before re-trimming.
Horizontal Roller Windows
Signs you need it
The window only opens halfway because the track is fouled with dust and the roller is worn flat, or the frame has drifted out of square and the panel now binds.
What it costs in Temple City
Plan on $350 to $850 per window, with the higher end covering openings that need re-framing rather than a shim-and-seal retrofit.
How we do it
We measure the existing opening for square, replace or rebuild the track assembly, set the new roller panel, and adjust alignment until the panel glides without drag.
Casement Windows
Signs you need it
The crank has stripped from years of use and the sash no longer seals tight against the frame, which is a specific problem in Temple City because Santa Ana dust works into the mechanism.
What it costs in Temple City
Budget $500 to $1,000 per window in Temple City, which reflects new hardware and frame correction on settled ranch openings.
How we do it
We remove the old sash and hardware, correct the rough opening with shims, install the new casement unit and crank assembly, and test the seal along the full perimeter.
What Window Installation Costs in Temple City
| Item | Typical range in Temple City |
|---|---|
| Single & Double Hung Windows | $400 - $950 |
| Horizontal Roller Windows | $350 - $850 |
| Casement Windows | $500 - $1,000 |
How do I know if my Temple City windows need full replacement or just new seals?
If the frame is still square and the glass is intact but condensation sits between panes, seal replacement may be enough. Once the aluminum frame is twisted or the opening has settled out of square, full replacement is the only fix that holds.
Will my Temple City windows pass Title 24 inspection?
We spec SHGC and U-factor to Climate Zone 10 limits before ordering, so the units that arrive are the units that pass. Call (509) 265-6387 to get a written price with the spec sheet included.
Impact Windows & Doors in Temple City
Impact windows and doors in Temple City are not a coastal hurricane product here; they are a July-to-September heat and debris product. Temple City’s inland location in Climate Zone 10 means impact-rated glass also carries a lower SHGC, so the same laminated assembly that stops flying storm debris also cuts solar gain through glass that, on a 105°F afternoon, is doing real thermal work. Santa Ana winds pick up fine eastern-basin grit and drive it into door tracks and window seals, so the impact rating and the seal durability are doing two different jobs and both matter. This is the work covered under our Impact Windows & Doors service.
Impact-Resistant Windows
Signs you need it
You live on a street with mature eucalyptus or pepper trees that shed limbs in high wind, or you want the thermal and debris protection in a single glazing package.
What it costs in Temple City
Count on $800 to $1,600 per window installed in Temple City, depending on size, framing condition, and the specific laminated glass assembly.
How we do it
We measure the opening, spec the laminated impact-rated unit to Climate Zone 10 SHGC limits, square and seal the frame, then install and document the finished opening.
Hurricane Impact Windows
Signs you need it
Your insurer has flagged the opening for wind-borne debris protection, or you are replacing windows in a home that receives direct Santa Ana exposure.
What it costs in Temple City
Expect $900 to $1,800 per window in Temple City, with larger openings at the upper end of the range.
How we do it
We order the hurricane-rated unit from the manufacturer line that matches your framing, install it into a squared and sealed opening, and leave a documented photo record of the completed work.
What Impact Windows & Doors Costs in Temple City
| Item | Typical range in Temple City |
|---|---|
| Impact-Resistant Windows | $800 - $1,600 |
| Hurricane Impact Windows | $900 - $1,800 |
| Sliding Impact Doors | $2,000 - $5,000 |
Do impact windows make sense in Temple City if I am not near the coast?
Yes, because the same laminated glass that provides impact resistance also carries a lower SHGC, which matters in Climate Zone 10. The thermal argument alone justifies the cost in Temple City’s summer heat.
Will impact windows look different from standard windows?
The visible difference is minimal, and most people cannot tell an impact-rated unit from a standard one once installed. Call (509) 265-6387 for a written price with the exact glass spec.
Energy-Efficient Windows in Temple City
Energy-efficient windows in Temple City are the highest-leverage upgrade most of these 1950s and 60s homes can get, because the original single-pane aluminum frames are a thermal liability in Climate Zone 10’s 100°F summers. Selection here starts with SHGC, not U-factor alone, because solar gain through west-facing glass on a July afternoon is the dominant load. We spec low-E coatings and gas fills to the inland heat, not the coastal default that drives most LA-area window ordering. This work sits under our Energy-Efficient Windows hub.
Low-E & Argon Gas Glass
Signs you need it
Rooms on the west side of the house are noticeably hotter than the rest of the home by 3 p.m., and the glass itself is hot to the touch.
What it costs in Temple City
Budget $450 to $1,000 per window installed in Temple City, depending on glass package and frame condition.
How we do it
We pull the old unit, square the opening, install the new low-E argon-filled insulated glass unit, and verify the SHGC against the Climate Zone 10 requirement on the written survey.
ENERGY STAR Replacement Windows
Signs you need it
You want a third-party-rated window that qualifies for utility rebates where available, and you want the SHGC and U-factor printed on the spec sheet, not just described.
What it costs in Temple City
Plan on $500 to $1,100 per window in Temple City, with the range covering single and double hung units in tract-home openings.
How we do it
We select the ENERGY STAR-rated unit that meets Climate Zone 10 criteria, install it with the same measured survey and photo record, and hand you the spec sheet with the final invoice.
What Energy-Efficient Windows Costs in Temple City
| Item | Typical range in Temple City |
|---|---|
| Low-E & Argon Gas Glass | $450 - $1,000 |
| ENERGY STAR Replacement Windows | $500 - $1,100 |
| UV-Blocking & Fade Protection Glass | $475 - $1,050 |
Will energy-efficient windows actually lower my Temple City cooling bill?
Yes, the effect is measurable on the hottest afternoons, when single-pane aluminum is conducting heat directly into the room. The savings scale with west-facing exposure, so your results will track how much glass faces the afternoon sun.
What SHGC should I be looking for in Temple City?
Climate Zone 10 requires a materially lower SHGC than coastal zones, so do not buy a window spec’d for the beach. Call (509) 265-6387 and we will put the correct number in writing.
Sliding & Patio Doors in Temple City
Sliding and patio doors in Temple City fail in two predictable ways: the track fills with fine San Gabriel Valley dust during Santa Ana wind events, and the rough opening drifts as the slab settles, so the door binds halfway through its travel. On postwar ranch homes, the original sliding doors are often narrow, aluminum-framed units that leak air and let heat in, and replacement means correcting the opening before setting the new track. We measure, shim, and set the door so it rolls on a square track and seals against a true frame. This job falls under Sliding & Patio Doors.
Patio Doors
Signs you need it
The door binds or sticks at the midpoint of its travel, or the frame has pulled away from the rough opening and daylight shows at the corners.
What it costs in Temple City
Expect $1,200 to $3,500 installed in Temple City, depending on door width, framing correction, and glass package.
How we do it
We remove the old door and track, square the rough opening with shims, set the new unit, and seal the threshold against Temple City’s dry-season dust.
Impact Sliding Glass Doors
Signs you need it
You are replacing a patio door that faces a yard with mature trees, or you want impact-rated glass with a lower SHGC for a west-facing opening.
What it costs in Temple City
Budget $2,000 to $5,000 per door in Temple City, reflecting the laminated glass and the heavier track system.
How we do it
We measure the opening, spec the impact-rated door to Climate Zone 10, correct the rough opening, install the door and track, and document the finished threshold.
What Sliding & Patio Doors Costs in Temple City
| Item | Typical range in Temple City |
|---|---|
| Patio Doors | $1,200 - $3,500 |
| Impact Sliding Glass Doors | $2,000 - $5,000 |
| Screen Door Installation | $150 - $400 |
Why does my Temple City sliding door stick in summer but not winter?
The slab and frame expand and contract with temperature swings, and the inland summer heat can make an already-settled opening bind. The fix is usually re-shimming the track, not replacing the door panel.
How much does sliding glass door replacement cost in Temple City?
A standard patio door replacement runs $1,200 to $3,500 installed, with impact-rated versions at $2,000 to $5,000. Call (509) 265-6387 for a written quote scoped to your exact opening.
Impact Garage Doors in Temple City
Impact garage doors in Temple City address a structural concern: the garage is often the largest unbraced opening in a 1950s or 60s ranch home, and the original wood or thin aluminum door does little against Santa Ana wind loads. A wind-rated impact garage door reinforces the opening, improves thermal performance in a garage that soaks 100°F heat, and can lower the whole wall’s vulnerability in a high-wind event. We spec the door to wind-load requirements and Climate Zone 10 exposure, not to a warehouse default. This is part of our Impact Garage Doors line.
Hurricane-Rated Garage Doors
Signs you need it
Your existing garage door flexes visibly under wind load, or you want a single assembly that handles both debris and wind pressure on a Santa Ana-exposed wall.
What it costs in Temple City
Plan on $1,800 to $4,500 in Temple City for a hurricane-rated single or double door, including track and hardware.
How we do it
We measure the opening, verify the header and mount points, install the rated door and reinforced track, and test the full travel under load.
Energy-Efficient Garage Doors
Signs you need it
Your garage turns into an oven by noon because the existing door is an uninsulated aluminum panel with no thermal break.
What it costs in Temple City
Expect $1,200 to $3,200 per door in Temple City, depending on insulation value and panel construction.
How we do it
We replace the non-insulated door with an insulated steel or composite panel, set the track and seals, and verify the thermal break along the full perimeter.
What Impact Garage Doors Costs in Temple City
| Item | Typical range in Temple City |
|---|---|
| Hurricane-Rated Garage Doors | $1,800 - $4,500 |
| Energy-Efficient Garage Doors | $1,200 - $3,200 |
| Garage Door Replacement | $1,000 - $2,800 |
Do Temple City homes need wind-rated garage doors?
Many do, especially on streets with direct exposure to Santa Ana wind corridors. If the door flexes or the track shudders in a strong wind, a wind-rated replacement is a structural upgrade, not a luxury.
Will an insulated garage door help my Temple City cooling load?
Yes, if the garage is uninsulated now, replacing a thin aluminum door with an insulated panel reduces heat transfer into the house through the shared wall and the garage ceiling. Call (509) 265-6387 for a written price.
Custom & Geometric Windows in Temple City
Custom and geometric windows in Temple City come up often because the postwar ranch and minimal traditional homes here have rooflines and facade details that standard window sizes ignore: eyebrow openings, arched transoms, angled gable glass, and oversized picture windows. The challenge is not just the glass shape; it is cutting a custom unit that will seat in a rough opening that has settled for sixty-plus years and still seal against 100°F heat and Santa Ana dust. We measure the actual opening, not the original blueprint, and order the unit to the as-built dimensions. This work is part of Custom & Geometric Windows.
Arched & Curved Windows
Signs you need it
The original arched window is a single-pane aluminum unit with a failed seal, or the curve no longer matches the trim after years of settling.
What it costs in Temple City
Expect $900 to $2,200 per window in Temple City, depending on radius, glass package, and framing condition.
How we do it
We template the as-built curve, order the custom unit, square and seal the rough opening, and set the glass with the same photo record we leave on every job.
Oversized Openings
Signs you need it
You have a picture window or gable opening too large for any stock frame, or the existing glass is losing its seal and you do not want to downsize the view.
What it costs in Temple City
Budget $1,500 to $4,000 per opening in Temple City, with size and glass weight driving the upper end.
How we do it
We measure the full opening, verify header and lintel capacity, order the custom laminated or low-E unit, and install with a written spec sheet matching the final invoice.
What Custom & Geometric Windows Costs in Temple City
| Item | Typical range in Temple City |
|---|---|
| Arched & Curved Windows | $900 - $2,200 |
| Oversized Openings | $1,500 - $4,000 |
| Geometric & Shaped Windows | $800 - $2,000 |
Can you match the original window shapes on a Temple City ranch home?
Yes, we template the actual opening on site and order the custom unit to that shape, not to the original blueprint, because sixty years of settling changes the as-built dimensions.
Are custom windows significantly more expensive than stock sizes?
Custom shapes run higher than stock, but the gap is smaller than most people expect once you factor in the framing correction stock sizes still require. Call (509) 265-6387 for a written quote on your exact openings.
Brands We Service in Temple City
We install and service PGT, CGI, CWS, and ES Windows product lines in Temple City, selected by performance tier and price range for each opening, not by what is in stock. Parts for common track and seal replacements are available locally, and most standard service calls are scheduled within a few days. See our brands for the full manufacturer list.
Pricing for Windows & Doors in Temple City, CA
| Service | Typical range in Temple City |
|---|---|
| Single & Double Hung Windows | $400 - $950 |
| Horizontal Roller Windows | $350 - $850 |
| Casement Windows | $500 - $1,000 |
| Impact-Resistant Windows | $800 - $1,600 |
| Hurricane Impact Windows | $900 - $1,800 |
| Low-E & Argon Gas Glass | $450 - $1,000 |
| Patio Doors | $1,200 - $3,500 |
| Impact Sliding Glass Doors | $2,000 - $5,000 |
| Hurricane-Rated Garage Doors | $1,800 - $4,500 |
| Arched & Curved Windows | $900 - $2,200 |
What pushes the price up in Temple City is almost always framing correction. A home that has settled out of square needs more shimming and re-framing than a newer build, and that labor is a real line item. The price you see on our measured survey is the price you pay, because the survey and the written quote are the same document.
Neighborhoods We Serve in Temple City
We work throughout Temple City, from the older ranch clusters near Temple City High School to the tract homes along Las Tunas Drive and the residential streets running east toward the San Gabriel River. We respond to most Temple City calls within one business day for estimates and scheduling.
- Temple City High School area
- Las Tunas Drive corridor
- Emperor Elementary area
- Longden Avenue neighborhoods
- Rosemead Boulevard corridor
Service Area - Cities Near Temple City
Our crews serve Temple City and the surrounding San Gabriel Valley communities, including El Monte, CA, San Gabriel, CA, Arcadia, CA, and Rosemead, CA. Dispatch and scheduling are coordinated from the brand’s Los Angeles office, with local crews covering Temple City directly.
Serving Temple City, CA - Our Local Coverage Area
We’re based in the Temple City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Temple City
Yes, when the scope requires it. Window and door replacements that change the opening size or involve structural correction need permits from Temple City’s building department, and we handle the paperwork and inspections as part of the written scope. The permit cost is a line item on the quote, not a surprise later.
We typically schedule estimates in Temple City within one business day. The measured survey takes 45 to 90 minutes depending on how many openings you want scoped, and you keep the survey document when we leave. Call (509) 265-6387 to set a time.
No, because the price we write comes from the same measured survey we used to scope the job. If we find something behind the wall we could not see, we stop, show you the condition, and give you a written change order before touching anything else.
Call (509) 265-6387 to schedule your free estimate in Temple City. We will hand you a written price before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Temple City Customers Say
"The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R."Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B."They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C.