Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterDoor Installation in North Richland Hills: What a 1970s Brick Ranch Actually Needs
Door installation in North Richland Hills rarely means swapping one slab for another. Most homes here were built between 1960 and 1985 on expansive Tarrant County clay, and after four decades of shrink-swell cycles, the frames those doors hang in have moved. Replacement door work in North Richland Hills typically runs $900-$2,800 for a standard exterior door, $1,800-$4,500 when a frame rebuild is required, and $3,500-$9,000 for impact-rated entry systems. That second number is the one most North Richland Hills homeowners actually end up at, because the clay here doesn’t just dent doors; it racks the openings out of square. Call (509) 265-6387 and we’ll measure what you have before quoting what you need.
Why Sightline Windows & Doors Is North Richland Hills’s Preferred Door Installation Company
We work differently in North Richland Hills, because the houses here demand it. Every job starts with a measured survey you keep, and the written price cannot differ from that document. That’s Haven Clause 1: have it in writing. The technician who measures your door is background-checked, uniformed, and identified by license number before arrival, per Haven Clause 3. You get a written scope, a documented photo record after every visit, and a 365-Day Done Right Promise on the finished install. Sonia Raman founded Sightline in 2012 on a single principle: the measurement and the quote are the same document. It still is.
Our crew has opened up enough North Richland Hills entryways to name the pattern before the old unit is even out. Thornhill, Richland Hills, North Hills, the subdivisions west of Rufe Snow Drive and east of Davis Boulevard: 1970s brick-veneer ranches with original steel doors, original aluminum storm doors, and frames that haven’t been square since the 1980s drought. That local knowledge matters because it changes what we quote. We don’t bid a slab swap when the jamb is racked 3/8 inch out. We bid the rebuild and the permit, and we put both in writing before work starts.
Customers in North Richland Hills don’t need a sales pitch about longevity. They need a company that can show them the numbers. We publish pricing on the page. We review any competitor’s written estimate at no charge. Every job, from a single replacement door in Bedford to a full entry system in Haltom City, leaves a photo record. That’s not a courtesy; it’s Haven Clause 4.
Our Door Installation Services in North Richland Hills
Replacement Doors
Most replacement door projects in North Richland Hills start with a 1970s steel door that’s bowed, rusted at the bottom rail, or permanently stuck from frame movement. The rough openings in these 1960s-1980s brick ranchers were never built to modern tolerances, and many won’t accept a stock pre-hung unit without trimming or custom sizing. We measure to the 1/16 inch, note the sightline, and tell you whether you need a slab replacement or a full frame rebuild before anyone touches a tool. A typical replacement door in North Richland Hills runs $900-$2,800, with the higher end covering framing correction.
Entry Doors
Your front door carries the visual weight of the whole house, but in North Richland Hills it’s also the first line against July heat and April hail. We install fiberglass and steel entry doors from Therma-Tru, ViewLux, and other performance-tier lines, specified by exposure and U-factor rather than what’s in stock. On a 1974 Thornhill brick ranch, we pulled a bowed entry door, found the jamb racked 3/8 inch out of square, sistered the framing, rebuilt the jamb in place, sealed the rough opening with modern flashing, and hung a Therma-Tru Classic-Craft fiberglass door. The frame rebuild was a separate, pre-approved line item. The homeowner saw the photo record before we loaded the old steel door onto the truck.
Storm & Exterior Doors
Original aluminum storm doors from the 1970s hide a lot of damage. We regularly find water-damaged sub-sills and rotted king studs behind them in North Richland Hills homes, because the old flashing detail simply wasn’t designed for the freeze-thaw and rain cycles this region gets in March and October. A new storm door on a deteriorating sub-sill is a recurring air leak. We inspect the rough opening, report what we find, and give you a written scope for both the door and the framing repair. Storm door installation in North Richland Hills typically runs $500-$1,400, climbing if the sub-sill requires replacement.
Hurricane-Proof Front & Entry Doors
North Richland Hills sits inside the DFW hail corridor, and severe spring thunderstorm seasons routinely dent door skins and shatter side-lite glass. Impact-rated entry doors from PGT and CGI are designed and tested for exactly this. They use laminated glass and reinforced frames rated for large-missile impact, which matters when a March storm drives hail horizontally into a west-facing entry on Glenview Drive. These systems run $3,500-$9,000 installed in North Richland Hills, depending on size, finish, and whether the existing brickmold must be rebuilt. We’ll explain the rating, show you the test documentation, and write the price before work begins.
French & Double Doors
French and double doors on a 1980s ranch usually mean a patio or an awkwardly converted carport wall. The active panel sags, the astragal doesn’t seat, and the threshold has gone soft from years of clay-soil movement and poor drainage. We rebuild the opening to square, correct the header, and hang a new system with adjustable hinges and interlocking weatherstrip. Expect $2,200-$6,000 for a properly rebuilt double-door installation in North Richland Hills, because the framing work is almost always required.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in North Richland Hills
We specify from eight verified manufacturer lines, and in North Richland Hills the most relevant are Therma-Tru for fiberglass entry systems, PGT and CGI for impact-rated doors, and ViewLux for custom and architectural front entries. Every unit is specified by performance tier and price range, not by margin. We keep common hardware and weather-stripping inventory on our trucks for North Richland Hills service calls, which means fewer return trips when a 40-year-old latch body fails mid-install. If you already have a PGT or Therma-Tru door and need it serviced or replaced, we handle that too. Our Door Installation team works across the full DFW metro, and North Richland Hills is a core service area.
Common Door Installation Problems We See in North Richland Hills Homes
- Clay-soil frame racking: Four-plus decades of expansive Tarrant County clay shrink-swell has pulled thousands of NRH door jambs out of square. A standard pre-hung unit won’t fit without jamb reconstruction, turning a one-day slab swap into a three-day rebuild.
- Rotted king studs behind aluminum storm doors: Original 1970s storm doors were flashed poorly by modern standards. Water follows the old caulk line, the sub-sill swells, and the king stud rots. Installing a new entry door without repairing that framing guarantees recurring leaks and sticking panels.
- Non-standard rough openings: Many 1960s North Richland Hills homes have rough openings that don’t match modern stock sizes. Ordering a standard 36-inch door without measuring can mean a wrong-order return, a delayed permit inspection, and an exposed opening during storm season.
- Hail-damaged door skins and side-lites: The DFW hail corridor runs directly over North Richland Hills. Spring storms regularly dent steel door skins and crack single-pane side-lite glass, generating insurance-claim-driven replacement work every year.
Pricing for Door Installation in North Richland Hills, TX
Here’s what we quote in North Richland Hills, in writing, before any work starts.
- Standard exterior door replacement: $900-$2,800, depending on size and whether the existing frame is salvageable.
- Entry door with full frame rebuild: $1,800-$4,500. This is the most common NRH scenario when clay movement has racked the jamb.
- Storm door installation: $500-$1,400, climbing if the sub-sill or trim needs repair.
- French or double door system: $2,200-$6,000, with framing correction included in most cases.
- Impact-rated entry door (PGT or CGI): $3,500-$9,000, depending on glass package, size, and finish.
The biggest cost variable in North Richland Hills is framing, not the door itself. A 1978 brick ranch off Rufe Snow Drive is far more likely to need jamb reconstruction than a 2015 build in Keller. We build that into the estimate before the first measurement is taken, per Haven Clause 5: no surprises. Call (509) 265-6387 to schedule your free measured survey, and you’ll get a written price that cannot change once work begins.
We Also Serve Cities Near North Richland Hills
Sightline Windows & Doors handles Door Installation in North Richland Hills and the surrounding cities: Hurst, Haltom City, Bedford, and Colleyville. The housing stock changes block to block, from 1960s brick ranches in Hurst to 1990s frame construction in Colleyville, and we measure each opening the same way: once, in writing. Dispatch and scheduling for North Richland Hills are coordinated from our Dallas-Fort Worth office, with crews serving the city locally.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in North Richland Hills
Because the expansive Tarrant County clay under North Richland Hills has been shrinking and swelling for four-plus decades, and the 1960s-1980s brick-veneer ranch frames that sit on it have moved out of square. A slab swap only works if the jamb is still plumb and the rough opening is dimensionally stable. We regularly find jambs racked 1/4 to 3/8 inch out of square in NRH homes, which means the new door won’t seal, won’t latch, and will bind at the corners. That’s the scope-creep pattern our estimates are built to catch before the first measurement is taken. Call (509) 265-6387 for a measured survey and a written quote that addresses framing up front.
Yes, North Richland Hills requires a permit when the opening is modified or the framing is altered. A like-for-like slab replacement typically does not require one, but a full frame rebuild does. When a permit is pulled, the inspector checks for current code compliance at the opening: proper flashing, anchor spacing, and in some cases energy-code thresholds for the replacement unit. We handle the permit application, schedule the inspection, and pass it before we call the job done. Any code-required upgrade is written into the quote before work starts, not after the wall is open.
You should expect a measured survey, a level check on the jamb, a photograph of the existing opening, and a written scope that tells you whether you’re looking at a slab replacement or a frame rebuild. We check the header for splits, the king stud for rot, the sub-sill for water damage, and the rough opening dimensions against the new unit. You keep the survey. The quote cannot differ from it. Call (509) 265-6387 and we’ll walk through the process on the phone before scheduling.
Usually yes, if the existing storm door frame is structurally sound and the new entry door is ordered with a compatible depth. But in North Richland Hills brick ranches, we often find the storm door’s sub-sill has been trapping water for decades, and leaving it in place means the new entry door inherits a moisture problem. We’ll tell you what we find in writing, with photos, and you make the call. The storm door decision is priced separately, so it never becomes a surprise change order.
We document it, price it in writing, and get your approval before we touch it. Our North Richland Hills estimates already anticipate the clay-soil frame rebuild pattern, so when the old door comes out and the king stud is rotted or the header is split, the fix is usually already covered by a pre-written allowance. If the damage exceeds the allowance, we stop, photograph it, and give you a written line-item price for the additional work. We don’t proceed on a verbal okay. That’s Haven Clause 1, and it’s how we’ve handled every job since 2012, across 18,000+ installations.
Call (509) 265-6387 to schedule your free measured survey in North Richland Hills. You’ll get a written price before any tool is lifted, a photo record when the job is done, and a 365-Day Done Right Promise on the installation.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving North Richland Hills under the Haven Standard since 2012.