Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in San Bruno, CA
Window installation in San Bruno carries a complication most Peninsula cities don’t share: the house sits under SFO’s flight corridors, so the right glass isn’t just about heat loss. It’s about STC ratings, laminated glazing, and matching FAA-funded retrofit work done years ago. We’re Sightline Windows & Doors, and our San Bruno installs start with a measured survey you keep, followed by a written price that cannot change once work begins. Call (509) 265-6387 to schedule yours.
Why San Bruno Homes Are Different
San Bruno’s postwar housing stock, built mostly between 1945 and 1970, was framed for a quieter sky. Stucco ranch and bungalow homes went up with aluminum single-pane windows that offer almost no acoustic or thermal resistance, and the doors were set into frames that decades of coastal moisture have slowly racked out of square. Any door replacement here starts with checking the jamb and threshold, because a plumb install into a settled frame isn’t a given.
The climate does its own work. San Bruno sits in a natural wind gap between San Bruno Mountain and the bayshore, so persistent marine airflow drives salt-laden fog against west-facing openings year-round. We see failed insulated glass seals and corroded aluminum frames here faster than in Burlingame or Millbrae, and we spec materials for that exposure. Homes in the SFO Residential Sound Insulation Program have another variable: some rooms were retrofitted years ago, others weren’t, and matching new work to existing SFO-spec units is a regular part of the job.
Our Main San Bruno Services
Two services account for most of the calls we take from San Bruno homeowners, and each has its own dedicated page with full pricing and scope.
Door Installation in San Bruno
San Bruno door frames move. Between settling foundations and decades of bay moisture, we regularly find jambs racked a quarter-inch or more out of square, which means a straight door swap isn’t enough. Our Door Installation in San Bruno page covers threshold work, jamb correction, and what the written scope includes before any tool is lifted.
Window Replacement in San Bruno
Replacing windows in San Bruno means solving for noise and salt air at once. Whether you’re supplementing SFO-funded work or starting from original single-panes, the Window Replacement in San Bruno page explains the glass packages, STC options, and pricing structure we recommend for this specific housing stock.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterWindow Installation in San Bruno
Window installation in San Bruno means working with homes built between 1945 and 1970, most of them still carrying original aluminum single-panes that transmit both aircraft noise and the persistent wind-gap airflow. The windows we install here are specified for two problems at once: acoustic isolation from flight corridors and thermal performance against salt-laden coastal fog. Our Window Installation process begins with a measured survey you keep, which becomes the written price document before we order a single unit.
Single & Double Hung Windows
Signs you need it
Upper sashes that won’t stay up, visible corrosion on aluminum tracks, or condensation between panes in bedrooms facing the flight path.
What it costs in San Bruno
Single and double hung replacement windows in San Bruno run $450-$1,100 per opening installed, depending on glass package and frame material.
How we do it
We measure each opening, specify the acoustic or thermal glass your elevation requires, remove the old unit, flash the opening, set the new window, and document the finished install with photos.
Casement Windows
Signs you need it
Crank mechanisms that bind from salt corrosion, or fixed single-panes you want to convert to operable ventilation in kitchens and bathrooms.
What it costs in San Bruno
Casement windows run $650-$1,700 per unit in San Bruno, with laminated acoustic glazing at the upper end of that range.
How we do it
We check the existing rough opening for square, install the new casement with stainless hardware, adjust the sash for full-seal closure, and photograph the final reveal and weatherstripping.
What Window Installation Costs in San Bruno
| Item | Typical range in San Bruno |
|---|---|
| Single hung window (installed) | $450-$850 per opening |
| Double hung window (installed) | $600-$1,100 per opening |
| Casement window (installed) | $650-$1,700 per unit |
Do I need acoustic-rated glass for every San Bruno window?
No. Bedrooms and living rooms on the northwest or flight-path side benefit most from laminated STC-rated glass. Rear elevations with less exposure can use standard Low-E packages and still meet code. Call (509) 265-6387 for a measured survey that tells you which rooms need what.
Will the written price change once work starts?
No. The measured survey and the quote are the same document under our Haven Standard. If hidden framing damage appears, we document it and amend the scope in writing before proceeding. Call (509) 265-6387 to schedule your free estimate.
Impact Windows & Doors in San Bruno
Impact windows in San Bruno serve a different purpose than in Florida. Wind-driven debris is a factor on exposed hillside lots where the wind gap funnels hard, but the more common reason homeowners spec impact-rated glass is that it doubles as serious acoustic insulation. Laminated impact glass carries STC ratings far above standard dual-pane, which matters under SFO’s approach paths. Our Impact Windows & Doors work starts with a written scope that names the exact product and glass make-up before you commit.
Impact-Resistant Windows
Signs you need it
Northwest-facing rooms that rattle during high-wind events, or any ground-floor window within nine feet of a walkway that should meet current glazing safety codes.
What it costs in San Bruno
Impact-resistant windows in San Bruno run $900-$2,400 per opening installed, with PGT and CGI units occupying the middle and upper ends of that range.
How we do it
We measure the opening, match the glass thickness and interlayer to your wind-load zone, install with full perimeter anchoring, and provide the manufacturer’s wind-load documentation with your photo record.
Double Hung Impact Windows
Signs you need it
Homes supplementing SFO-spec retrofits in bedrooms where original double hungs remain, or second-story openings that get the full brunt of the gap wind.
What it costs in San Bruno
Double hung impact windows in San Bruno run $1,100-$2,600 per unit installed depending on size and STC requirements.
How we do it
We replace the full frame, set the impact-rated sash, tune the balances for smooth operation under heavier laminated glass, and photograph the anchoring before trim goes back.
What Impact Windows & Doors Costs in San Bruno
| Item | Typical range in San Bruno |
|---|---|
| Impact-resistant window (installed) | $900-$2,400 per opening |
| Double hung impact window (installed) | $1,100-$2,600 per unit |
| Impact sliding glass door (installed) | $3,000-$7,500 per door |
Will impact windows eliminate SFO aircraft noise?
They reduce it substantially, but no window eliminates noise entirely. Laminated impact glass with a wide air gap achieves the highest STC ratings. Call (509) 265-6387 to see which glass package matches your specific flight-path exposure.
Do impact windows in San Bruno require special permits?
Window replacement with same-size openings typically doesn’t require a permit, but any enlargement does. We confirm the requirement during the measured survey and pull permits when needed. Call (509) 265-6387 to review your scope.
Energy-Efficient Windows in San Bruno
Energy-efficient windows in San Bruno have to solve a counterintuitive problem: the climate is mild, but the wind gap makes heat loss constant. Homes here rarely need aggressive solar heat rejection, but they do need strong air sealing and low U-factors because the marine airflow never really stops. Salt-laden fog attacks seals year-round. Our Energy-Efficient Windows packages are specified for exactly that combination: moderate SHGC, low U-factor, and argon-filled dual panes that resist the coastal moisture cycle.
Low-E & Argon Gas Glass
Signs you need it
Rooms that lose heat steadily on foggy afternoons, or heating bills that stay high even though San Bruno’s temperature rarely dips below freezing.
What it costs in San Bruno
Low-E argon windows in San Bruno run $500-$1,300 per opening installed, with the larger sizes common in ranch picture windows at the top of that range.
How we do it
We verify the existing frame condition, install the new insulated glass unit with warm-edge spacers, set the Low-E coating orientation for your elevation, and document the U-factor and SHGC on your written scope.
UV-Blocking & Fade Protection
Signs you need it
Hardwood floors or furniture fading in south-facing rooms, or original single-panes letting in more glare than the coastal overcast suggests.
What it costs in San Bruno
UV-blocking glass packages in San Bruno add roughly $80-$220 per window over standard Low-E, depending on the coating tier.
How we do it
We spec a UV-blocking interlayer or coating matched to the room’s exposure, install the glass with the same anchoring and flashing as any replacement, and include the coating spec in your photo record.
What Energy-Efficient Windows Costs in San Bruno
| Item | Typical range in San Bruno |
|---|---|
| Low-E argon window (installed) | $500-$1,300 per opening |
| UV-blocking glass upgrade | $80-$220 per window |
| ENERGY STAR replacement package | $650-$1,800 per window |
Which performance spec matters most in San Bruno?
U-factor matters more than SHGC here. The wind gap keeps temperatures moderate, so heat retention through the glass is the bigger loss. We spec U-factors of 0.28 or lower on exposed elevations. Call (509) 265-6387 for a measured review of your current windows.
Will I see the energy savings in writing?
Yes. Your written scope includes the U-factor, SHGC, and glass package for every opening. That document is your record of exactly what performance you paid for. Call (509) 265-6387 to schedule a free estimate.
Sliding & Patio Doors in San Bruno
Sliding patio doors in San Bruno often fail in a specific order: the rollers wear, the track collects sand and salt, and the panel drifts out of alignment until it drags or refuses to latch. The persistent wind-gap airflow pushes grit against exposed tracks, which accelerates the wear cycle. Replacing a door here usually means addressing the rough opening too. Our Sliding & Patio Doors installs always include jamb and threshold inspection because postwar San Bruno frames rarely sit square anymore.
Sliding Glass Door Replacement
Signs you need it
A door that takes both hands to move, visible track corrosion on the ocean-facing side, or condensation that hasn’t cleared since last winter.
What it costs in San Bruno
Sliding glass door replacement in San Bruno runs $1,800-$4,500 installed, with the larger 3-panel configs common in ranch homes at the upper end.
How we do it
We measure the existing opening and the adjacent wall, check the header for sag, set the new track level, hang the panel, adjust the rollers for clean travel, and photograph the final reveal and drainage path.
Impact Sliding Glass Doors
Signs you need it
Large glass openings on the northwest elevation that flex visibly during high-wind events, or rooms where noise from the flight corridor enters through a patio door rather than windows.
What it costs in San Bruno
Impact sliding glass doors in San Bruno run $3,000-$7,500 per opening installed, with laminated glass and reinforced frames driving the range.
How we do it
We anchor the frame to the structure at specified intervals, set laminated impact glazing, install stainless rollers and hardware, and provide the wind-load documentation with your written scope.
What Sliding & Patio Doors Costs in San Bruno
| Item | Typical range in San Bruno |
|---|---|
| Standard sliding glass door (installed) | $1,800-$4,500 per door |
| Impact sliding glass door (installed) | $3,000-$7,500 per door |
| Screen door installation | $150-$450 per door |
Why does my San Bruno sliding door stick every few months?
Salt and sand from the wind gap accumulate on the track and in the roller bearings. Cleaning helps short-term, but replacement rollers and a level track are usually the fix. Call (509) 265-6387 for a track and roller assessment.
Will the new door frame fit my racked San Bruno opening?
We don’t assume it will. The measured survey includes checking the rough opening for square, and we adjust the jamb and threshold during install rather than forcing a door into a skewed frame. Call (509) 265-6387 for a free estimate.
Impact Garage Doors in San Bruno
Garage doors in San Bruno face a particular risk: much of the postwar housing stock has attached garages that share a wall with living space, and a breached garage door during a wind event becomes a structural liability for the whole house. Impact-rated garage doors also add acoustic mass that reduces the drum of aircraft noise through the garage-side wall. Our Impact Garage Doors work includes checking the jambs and header, which in San Bruno’s older homes are often the weakest link.
Hurricane-Rated Garage Doors
Signs you need it
A garage door that visibly flexes or bows inward when the gap wind punches the north-facing elevation, or one with rusting structural rails from years of salt-laden fog.
What it costs in San Bruno
Hurricane-rated garage doors in San Bruno run $2,500-$6,500 installed depending on width and reinforcement requirements.
How we do it
We measure the opening and header, spec the wind-load rating required for your elevation, reinforce the tracks and jambs, hang the door, and provide the manufacturer’s wind-load documentation.
Garage Door Replacement
Signs you need it
Bent tracks from years of wind pressure, sections that don’t seal at the weatherstripping, or a door that was never insulated in the first place.
What it costs in San Bruno
Garage door replacement in San Bruno runs $1,800-$4,200 for standard double-car doors, with impact-rated construction at the top of that range.
How we do it
We remove the old door and rails, set new vertical tracks and structural supports, hang the new sections, balance the springs, and photograph the finished install including the weatherstripping at the jambs and header.
What Impact Garage Doors Costs in San Bruno
| Item | Typical range in San Bruno |
|---|---|
| Hurricane-rated garage door (installed) | $2,500-$6,500 per door |
| Standard garage door replacement (installed) | $1,800-$4,200 per door |
| Wind-load code compliance upgrade | $600-$1,500 per opening |
Does San Bruno building code require impact garage doors?
Not for every home, but wind-load requirements apply to certain elevations and roof configurations. We verify the requirement for your address during the measured survey and document the code path on your written scope. Call (509) 265-6387 to confirm your requirements.
Can you reinforce my existing garage door instead of replacing it?
Sometimes. If the door sections are sound but the tracks and jambs are under-built, we can add bracing and replace hardware. If the sections themselves flex, replacement is usually safer. Call (509) 265-6387 for an assessment.
Custom & Geometric Windows in San Bruno
Custom and geometric windows in San Bruno usually enter the conversation when a homeowner wants something the original 1950s framing never allowed. Arched tops, angled glass, oversized openings: these change the house’s sightlines and require structural headers that weren’t part of the original build. The wind-gap exposure means any custom unit here still has to hold a seal against salt-laden fog. Our Custom & Geometric Windows work starts with a measured survey, then a written price that covers the full opening, not just the glass.
Geometric & Shaped Windows
Signs you need it
A blank gable wall that needs architectural interest, or a semicircular transom above an entry door that’s been boarded or sealed.
What it costs in San Bruno
Geometric and shaped windows in San Bruno run $1,200-$4,800 per unit installed, with custom angles and structural header work pushing the price up.
How we do it
We measure the opening in three dimensions, spec the glass and frame, handle the header and framing work if the opening is new, set the unit, and document the sightline from inside and out.
Oversized Openings
Signs you need it
Living rooms that face the western hills but are still walled in with original three-foot windows, or homeowners wanting a full glass view without sacrificing the structural integrity of the home.
What it costs in San Bruno
Oversized window openings in San Bruno run $2,000-$8,500 installed, including the header engineering and framing the opening requires.
How we do it
We work with a structural engineer when the opening changes load paths, install the header and king studs, set the oversized unit with mechanical lifting, and photograph the framing before the trim goes on.
What Custom & Geometric Windows Costs in San Bruno
| Item | Typical range in San Bruno |
|---|---|
| Geometric or shaped window (installed) | $1,200-$4,800 per unit |
| Oversized opening (installed, including framing) | $2,000-$8,500 per opening |
| Arched or curved window (installed) | $1,500-$5,000 per unit |
Do custom windows in San Bruno take longer to order?
Usually yes. Custom geometry and specialty glass can add three to six weeks to lead times. We provide the schedule in writing with your quote. Call (509) 265-6387 to review your specific timeline.
Can you match the existing window style in my San Bruno ranch?
We match frame profiles and sightlines across the major manufacturers we carry. If you’re supplementing SFO-spec retrofits, we source laminated acoustic glass to blend with those existing units. Call (509) 265-6387 for a style match review.
Brands We Service in San Bruno
We install and service windows and doors from PGT, CGI, ViewLux, and CWS, among others. Our San Bruno crews carry common replacement parts locally stocked, so service calls on those lines usually get completed in one visit rather than two. See our brands for the full list and what each line is best suited for.
Pricing for Windows & Doors in San Bruno, CA
| Service | Typical range in San Bruno |
|---|---|
| Single hung window (installed) | $450-$850 per opening |
| Double hung window (installed) | $600-$1,100 per opening |
| Casement window (installed) | $650-$1,700 per unit |
| Impact-resistant window (installed) | $900-$2,400 per opening |
| Low-E argon window (installed) | $500-$1,300 per opening |
| Sliding glass door (installed) | $1,800-$4,500 per door |
| Impact sliding glass door (installed) | $3,000-$7,500 per door |
| Hurricane-rated garage door (installed) | $2,500-$6,500 per door |
| Geometric or shaped window (installed) | $1,200-$4,800 per unit |
| Oversized custom opening (installed) | $2,000-$8,500 per opening |
Prices in San Bruno push upward when a job requires laminated acoustic glass for flight-path rooms, or when racked postwar door frames need jamb and threshold correction before the new unit goes in. Whatever the scope, you receive a written price before any work starts, and that price is the same document we work from on install day.
Neighborhoods We Serve in San Bruno
Our crews work throughout San Bruno, from the hillside streets below San Bruno Mountain to the flatlands east of El Camino Real. We schedule by measured survey, not by neighborhood route.
- Rollingwood
- Mills Park
- Portola Highlands
- Huntington
- Crestmoor
Response time for most San Bruno estimates is one to three business days, depending on our survey calendar.
Service Area - Cities Near San Bruno
We also serve South San Francisco, CA, Pacifica, CA, Daly City, CA, and Burlingame, CA. Each city gets its own measured survey and written price, never a template. If you’re on the border between two service areas, call (509) 265-6387 and we’ll confirm coverage.
Serving San Bruno, CA - Our Local Coverage Area
We’re based in the San Bruno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in San Bruno
Most San Bruno surveys are scheduled within one to three business days. The survey is the document that generates your written price, so we never skip it. Call (509) 265-6387 to get on the calendar.
Some San Bruno neighborhoods have HOAs with architectural review requirements, particularly for front-facing window style changes. We provide spec sheets and product documentation for your application, but the approval itself comes from your HOA. Call (509) 265-6387 if you need help assembling the paperwork.
When a permit is required, yes. Same-size window replacement typically doesn’t need one, but enlarging openings or altering structural headers does. We confirm the requirement during the measured survey and handle the permit process as part of your written scope. Call (509) 265-6387 to ask about your specific project.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Bruno Customers Say
"The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R."Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B."They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C.