Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Fort Worth, TX
Window installation in Fort Worth starts with a question most other Texas cities don’t have to ask: what is the soil doing under this house? The black gumbo clay across Fort Worth swells and shrinks with every wet-dry cycle, racking rough openings out of square and breaking seals in ways that make a straight unit swap the wrong repair. We price a Fort Worth job by measuring the opening as it sits today, not by assuming the original frame is still true. For a written, line-item number on your specific windows or doors, call (509) 265-6387.
Why Fort Worth Homes Are Different
Fort Worth sits on some of the most aggressively expansive clay soil in Texas. In wet seasons the ground swells; in dry months it contracts. That cycle never stops, and the homes feel it first at the openings. Wedgwood and Eastwood Terrace brick ranches from the 1950s and 1960s ride on slabs that have moved for sixty years, leaving door frames out of plumb and insulated glass units with broken seals. A frame re-square is often the first line item on a Fort Worth door estimate, not an optional add-on.
The housing stock adds a second layer. East and south side ranches still wearing original aluminum single-pane windows lose energy by the week, and Near Southside and Fairmount craftsman bungalows push into historic overlay territory where window and door sizing is not a pick-from-the-catalog decision. Add Tarrant County’s hail frequency and the February 2021 freeze that shattered thousands of single-pane and older thermopane windows across the city, and Fort Worth replacement work sits at the intersection of soil movement, aging stock, storm damage, and code. We write the measured survey to match that reality.
Our Main Fort Worth Services
Two categories drive most of the calls we take from Fort Worth homeowners: full door replacement and window replacement. Each has its own Fort Worth page because the job specifics here, especially the foundation movement piece, deserve more room than a single section can hold.
Door Installation in Fort Worth
Door work in Fort Worth starts at the rough opening, not at the hinge. Decades of clay movement in neighborhoods like Wedgwood, Eastwood Terrace, and the Haltom City border have left thousands of door openings out of square. We measure the diagonal, note the rack, and price the re-square before the new slab ever goes in. Exterior doors, interior doors, and patio door systems all get the same measured-survey treatment. See the full scope on the Door Installation in Fort Worth page.
Window Replacement in Fort Worth
Fort Worth window replacement jobs mix three forces: aging aluminum frames from the 1950s-1970s ranch stock, hail damage, and seal failures from soil movement or the 2021 freeze. We survey each rough opening, document the frame condition, and write the price for what the opening actually needs. No catalog default, no square-unit assumption. The complete pricing and process lives on the Window Replacement in Fort Worth page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterWindow Installation in Fort Worth
Window installation in Fort Worth is a diagnosis job before it is a product job. The clay soil under the city’s east and south side ranch homes has spent decades shifting rough openings, so a measured survey that catches frame rack early is the difference between a window that seals and one that gets called back after the next wet season. We install across the full run of Window Installation types, and every job starts with the opening as it measures today.
Single & Double Hung Windows
Signs you need it
Sashes that stick, drop when released, or let drafts through in a 1950s-1970s Fort Worth ranch are candidates for replacement.
What it costs in Fort Worth
Single and double hung installations in Fort Worth typically run $450-$950 per window, depending on size and frame condition.
How we do it
We measure both jambs and the diagonal, re-square the opening where the frame has shifted, set the unit to level, and seal with backer rod and low-expansion foam.
Casement Windows
Signs you need it
Crank mechanisms that bind, sagging sashes, or failed seals on a casement in a Fort Worth home mean the hardware has worn past adjustment.
What it costs in Fort Worth
Casement window installation in Fort Worth generally runs $550-$1,050 per unit, up to $1,800 for larger or clad frames.
How we do it
We pull the old sash and hardware, verify the rough opening square, install the new frame with the manufacturer’s flashing system, and check full crank operation before we leave.
What Window Installation Costs in Fort Worth
| Item | Typical range in Fort Worth |
|---|---|
| Single & double hung window | $450 - $950 per unit |
| Casement window | $550 - $1,050 per unit |
| Oversized or custom-clad window | $1,200 - $1,800 per unit |
How long does window installation take in Fort Worth?
A typical five-window job takes one day after the units arrive. Your written quote includes the full schedule before work begins, and no change order follows unless the opening measurement changes.
Do you re-square window openings on Fort Worth homes?
Yes, where the frame has racked from clay soil movement. The re-square labor appears in the written estimate, itemized, before we start. Call (509) 265-6387 for an exact number on your openings.
Impact Windows & Doors in Fort Worth
Impact windows and doors in Fort Worth are rated for wind and debris, but the local reason to consider them is hail. Tarrant County sits in one of the most hail-active regions in the country, and softball-sized stones have cracked standard glazing across the city more times than most homeowners can count. We specify Impact Windows & Doors by the opening’s exposure and the performance tier the home actually needs, not by what is in stock.
Impact-Resistant Windows
Signs you need it
Standard annealed glass that shattered or cracked during a recent Fort Worth hail event is the clearest signal to step up to impact-rated glazing.
What it costs in Fort Worth
Impact-resistant windows in Fort Worth typically run $1,000-$2,500 per unit, with larger openings pushing toward the top end.
How we do it
We measure the existing frame, verify the opening can accept the heavier laminate without rework, then install per the manufacturer’s High Velocity Hurricane Zone or wind-load detail as the opening requires.
Hurricane Impact Windows
Signs you need it
Fort Worth windows that face wide open exposure on the west or northwest sides take the brunt of storm front winds and flying debris.
What it costs in Fort Worth
Hurricane impact windows in Fort Worth range from $1,100-$2,600 per unit depending on size, frame material, and design pressure rating.
How we do it
We confirm the design pressure rating required for the opening, order the unit from PGT or CGI, and install with the full anchoring schedule the wind-load calculation calls for.
What Impact Windows & Doors Costs in Fort Worth
| Item | Typical range in Fort Worth |
|---|---|
| Impact-resistant window | $1,000 - $2,500 per unit |
| Hurricane impact window | $1,100 - $2,600 per unit |
| Impact door system | $2,800 - $6,500 per opening |
Are impact windows worth it in Fort Worth if I’m not on the coast?
Yes, especially with Fort Worth’s hail and wind history. Impact glazing survives debris impacts that crack standard glass. The premium is real, but so is the replacement cycle without it. Call (509) 265-6387 for a written comparison.
Will impact windows affect my Fort Worth home’s look?
Impact laminated glass looks nearly identical to standard insulated glazing from the curb. The frame profiles are slightly thicker. We specify product tiers from PGT and CGI that match your existing sightlines.
Energy-Efficient Windows in Fort Worth
Energy-efficient windows in Fort Worth earn their cost in August, when the sun beats on single-pane aluminum frames that are still doing duty in thousands of east side ranches. The clay soil also breaks seals over time, which quietly kills the insulating value of even newer thermopane units. We handle Energy-Efficient Windows as a package: the glazing, the frame material, and the air seal around the rough opening all get specified together.
Low-E & Argon Gas Glass
Signs you need it
Fort Worth rooms that overheat on west-facing walls in summer, or windows that show condensation between panes, are losing the battle without Low-E and gas fill.
What it costs in Fort Worth
Low-E with argon gas glazing in Fort Worth typically adds $50-$150 per window over standard insulated glass.
How we do it
We specify the Low-E coating position by orientation, order the insulating glass unit with argon fill to the manufacturer’s spec, and install with an air seal the rough opening actually holds.
ENERGY STAR Replacement Windows
Signs you need it
Windows that fail the summer heat test, burning afternoon sun without resistance, are candidates for full ENERGY STAR replacement in Fort Worth’s climate zone.
What it costs in Fort Worth
ENERGY STAR replacement windows in Fort Worth run $500-$1,800 per unit, with triple-pane options at the higher end.
How we do it
We match the window’s U-factor and SHGC to the opening’s orientation, then install the full replacement unit with a documented air-seal and trim detail.
What Energy-Efficient Windows Costs in Fort Worth
| Item | Typical range in Fort Worth |
|---|---|
| Low-E + argon upgrade | $50 - $150 per window |
| ENERGY STAR replacement window | $500 - $1,800 per unit |
| Triple-pane or high-SHGC glazing | $800 - $2,200 per unit |
Does energy-efficient glazing pay for itself in Fort Worth?
In a Tarrant County summer, yes. The utility savings on a full ranch replacement typically show within a decade, and comfort improves the first summer. Your written quote includes the glazing spec, so you can compare like for like.
Is argon gas worth the upgrade on Fort Worth windows?
Argon adds a measurable drop in heat transfer for a modest price, typically $50-$150 per unit. We spec it on most Fort Worth replacements because the climate rewards it. Call (509) 265-6387 for exact pricing on your openings.
Sliding & Patio Doors in Fort Worth
Sliding and patio doors in Fort Worth fail in a specific pattern: the track binds, then the panel racks, then the frame leaks, because the clay soil has shifted the opening while the door stayed straight. A replacement that ignores the rough opening re-square will be back in the same condition after one wet season. Our Sliding & Patio Doors work starts with the sill as it sits today, not as it was framed in 1965.
Patio Doors
Signs you need it
A patio door that drags on the track, leaks at the bottom corners, or no longer latches square on a Fort Worth ranch needs more than roller adjustment.
What it costs in Fort Worth
Patio door replacement in Fort Worth typically runs $1,800-$3,200 per opening, with French units starting around $2,100.
How we do it
We pull the old door, measure and adjust the rough opening to level, set the new threshold on a sealed sill pan, and hang the slab with full weatherstripping verified before we leave.
Sliding Glass Door Replacement
Signs you need it
Sliding glass doors with broken seals, rusted tracks, or panels that jump the rail during operation are at the end of their service life.
What it costs in Fort Worth
Sliding glass door replacement in Fort Worth runs $1,400-$3,500 per unit, depending on glass package and frame material.
How we do it
We match the panel size to the wall opening, re-level the track and sill where soil movement has settled the slab, then install the door with the manufacturer’s full flashing sequence.
What Sliding & Patio Doors Costs in Fort Worth
| Item | Typical range in Fort Worth |
|---|---|
| Standard patio door | $1,800 - $3,200 per opening |
| Sliding glass door replacement | $1,400 - $3,500 per unit |
| French or multi-panel patio door | $2,100 - $4,800 per opening |
How long does patio door replacement take in Fort Worth?
Most patio door jobs finish in one day, including the re-square and new trim work. Your written estimate includes the labor hours and the re-square cost if the opening has shifted. Call (509) 265-6387 for a survey date.
Can you replace just the sliding panel on a Fort Worth patio door?
Sometimes, but only if the existing frame and track are still true. On Fort Worth homes with clay movement, the frame itself is often the problem. We’ll measure both and recommend the repair that actually lasts.
Impact Garage Doors in Fort Worth
Impact garage doors in Fort Worth are less about hurricanes and more about what the weather does anyway. Hail the size of a fist has dented and destroyed thousands of standard sectional doors across Tarrant County, and a rated door holds up where a builder-grade panel will fold. We install Impact Garage Doors to the wind-load requirement on the door label, with the opening measured and the track re-aligned to a level that survives the next storm season.
Hurricane-Rated Garage Doors
Signs you need it
A Fort Worth garage door with dents, buckled panels, or a track that has shifted off plumb after a hail or wind event is a candidate for a rated replacement.
What it costs in Fort Worth
Hurricane-rated garage doors in Fort Worth typically run $2,500-$4,500 for a single door and $4,000-$7,000 for a double, excluding opener.
How we do it
We verify the wind-load calculation for the door’s size and exposure, order the rated panel and track package, and re-hang the opening with anchoring that matches the manufacturer’s schedule.
Garage Door Replacement
Signs you need it
Sections that no longer align, springs that chatter, or a door that binds partway through its travel on a Fort Worth home signals the system is worn past repair.
What it costs in Fort Worth
Full garage door replacement in Fort Worth runs $1,200-$2,800 for a standard single and $2,200-$4,500 for a double, with insulation and rating upgrades adding to it.
How we do it
We drop the old door, measure the opening for square and level, re-align the track to the new dimension, and install the replacement with the full hardware and weatherseal set.
What Impact Garage Doors Costs in Fort Worth
| Item | Typical range in Fort Worth |
|---|---|
| Standard garage door replacement | $1,200 - $2,800 single |
| Hurricane-rated single door | $2,500 - $4,500 |
| Hurricane-rated double door | $4,000 - $7,000 |
Do impact garage doors affect my home’s energy use in Fort Worth?
Yes, because rated doors carry thicker insulation and tighter seals than builder standard. On an attached garage that shares a wall with living space, that matters in August. Your written quote includes the insulation R-value.
Will any opener work with an impact garage door in Fort Worth?
Most modern openers work, but heavier rated doors may require a stronger unit. We check the opener’s draw rating during the survey and note it in the written estimate. Call (509) 265-6387 to schedule a survey.
Custom & Geometric Windows in Fort Worth
Custom and geometric windows in Fort Worth are the answer to two types of homes: the pre-1940 Fairmount and Near Southside bungalows where standard replacement sizes don’t exist, and the newer builds where a builder put in a shape that is now failing. Clay soil movement means the rough opening may not even be rectangular anymore, so every custom unit is built to a field measurement. Our Custom & Geometric Windows work starts with the template, not the catalog.
Geometric & Shaped Windows
Signs you need it
A Fort Worth home with a round top, hexagon, or triangular window that has a broken seal or a leaking frame needs a unit built to the exact opening shape.
What it costs in Fort Worth
Geometric and shaped windows in Fort Worth typically run $1,000-$3,000 per unit, with radius or true-circle shapes at the higher end.
How we do it
We field-template the exact rough opening, note the frame deflection from any soil movement, and order the unit from ES Windows or ViewLux to the measured geometry rather than a nominal size.
Arched & Curved Windows
Signs you need it
Arched or eyebrow windows with cracked glazing, failing seals, or visible frame separation in an older Fort Worth home are leaking air and light.
What it costs in Fort Worth
Arched and curved windows in Fort Worth run $1,500-$3,800 per unit depending on radius, glass type, and frame material.
How we do it
We build a physical template of the arch or curve, verify the opening has not settled out of shape, and order a factory unit to that exact radius and rise.
What Custom & Geometric Windows Costs in Fort Worth
| Item | Typical range in Fort Worth |
|---|---|
| Geometric shaped window | $1,000 - $3,000 per unit |
| Arched or curved window | $1,500 - $3,800 per unit |
| Oversized custom opening | $2,500 - $5,000 per unit |
Can you match a historic window profile in Fairmount?
Yes. We template the existing opening and specify a custom unit that holds the sightline and profile the historic overlay expects. The measured survey becomes the order document, so the replacement matches the opening, not a guess.
How long does a custom window take in Fort Worth?
Custom units take four to eight weeks from template to installation, depending on the manufacturer and the shape. Your written quote includes the full lead time. Call (509) 265-6387 for a template appointment.
Brands We Service in Fort Worth
We install and service windows and doors from our brands including PGT, CGI, CWS, and ViewLux. Common replacement parts and stock sashes arrive with standard lead times, and we order by the opening’s spec rather than by what a distributor has on the shelf.
Pricing for Windows & Doors in Fort Worth, TX
| Service | Typical range in Fort Worth |
|---|---|
| Single & double hung window | $450 - $950 per unit |
| Casement window | $550 - $1,050 per unit |
| Impact-resistant window | $1,000 - $2,500 per unit |
| Hurricane impact window | $1,100 - $2,600 per unit |
| ENERGY STAR replacement window | $500 - $1,800 per unit |
| Standard patio door | $1,800 - $3,200 per opening |
| Sliding glass door replacement | $1,400 - $3,500 per unit |
| Hurricane-rated garage door | $2,500 - $4,500 single |
| Geometric shaped window | $1,000 - $3,000 per unit |
| Arched or curved window | $1,500 - $3,800 per unit |
In Fort Worth, the two things that push a window or door price up are frame rack from clay soil movement and the cost of re-squaring an opening before installation. Both appear as written line items on the estimate, never as a surprise on the final invoice. The price you receive before work starts is the price on the contract, because the measured survey and the quote are the same document.
Neighborhoods We Serve in Fort Worth
Our crews measure and install windows and doors across Fort Worth’s core neighborhoods, including the foundation-active east and south side ranch stock and the older bungalow districts where sizing is never standard. We schedule surveys across the city with a single contact call, and most neighborhoods fall within the same response window once the survey is booked.
- Wedgwood
- Eastwood Terrace
- Fairmount
- Near Southside
- Haltom City border neighborhoods
Service Area - Cities Near Fort Worth
Sightline handles window and door work across the Fort Worth metro, including Haltom City, TX, North Richland Hills, TX, Hurst, TX, and Bedford, TX. The same measured survey, written pricing, and documented photo record apply on every job, whether it falls inside Fort Worth proper or across a neighboring city line.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Fort Worth
The expansive black gumbo clay under Fort Worth moves continuously with moisture changes, racking frames and breaking seals. Any replacement must account for the condition of the rough opening, not just the unit. That re-square labor shows up in our written estimates as a standard line item.
Yes, most Fort Worth window and door replacements that change the opening or the unit’s structural anchoring require a city permit. We identify the permit requirement during the survey and pull the permit as part of the written job scope. The permit cost appears in the estimate before work starts.
Call (509) 265-6387. A live person answers, takes the details on the property and the openings, and schedules the measured survey. The survey is the document the written price comes from, and you keep a copy before any work is approved.
For a free, written estimate on any window or door job in Fort Worth, call (509) 265-6387. We measure first, price in writing, and send a background-checked, uniformed technician who will leave a documented photo record when the work is done.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fort Worth Customers Say
"They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C."Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H."Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T.