Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Tampa
Door installation in Tampa means working with concrete block walls, wind-mitigation paperwork, and insurance deadlines that don’t wait. A standard entry door replacement runs $1,200 to $3,400 depending on impact rating and framing condition, while full hurricane-rated systems for larger openings land between $2,500 and $5,000. Our crews serve every Tampa neighborhood from South Tampa to New Tampa, and we schedule around permit inspections, not the other way around. Call (509) 265-6387 and we’ll start with a measured survey you keep, then hand you a written price before any work begins.
That’s Sightline’s entire operating rule under the Haven Standard, and it has governed every one of the 18,000+ openings we’ve installed since 2012. The written quote cannot differ from the measured survey. The crew that arrives is the crew on the record. And every job leaves a documented photo record when it’s finished.
Why Sightline Windows & Doors Is Tampa’s Preferred Door Installation Company
We spend most of our time in the neighborhoods where Tampa’s housing stock is oldest: Seminole Heights, Carrollwood, East Tampa, West Tampa. These are 1950s to 1970s CBS ranch homes, and nearly every one we open has the same story behind the door. Original aluminum frames, rotted jamb pockets, and zero wind-mitigation credit for insurance. Our technicians know what Hillsborough County inspectors will flag before they flag it, because we pull permits on every swap and pass those inspections the first time.
Sonia Raman, who leads Sightline, built the company’s Tampa-facing process around a plain fact: a door replacement here is rarely a hardware swap. It’s a structural correction with insurance consequences. That’s why our measured survey includes frame readings, sightline measurements, and a written scope that names the design pressure the opening must meet. You get the same document at quote and at invoice. No change orders, no phone-call surprises, no “we found rot” after the door is already off.
Our Tampa customers tell us the same things in reviews. They want the price on paper. They want the permit pulled. They want the wind-mitigation credit verified. We do all three as standard practice, not as an upsell. And our 365-Day Done Right Promise means if it’s not done right, we make it right. That’s Haven Clause 1 and Clause 5, written into every job.
Our Door Installation Services in Tampa
Entry Doors
A new entry door on a Tampa CBS home typically runs $1,200 to $2,800 installed. That assumes the existing jamb is sound, which in 1960s construction it often is not. We inspect the rough opening before we quote, because a rotted jamb pocket behind the stucco changes the job from a door swap to a reframe. We write that allowance into your contract in advance so the price cannot move without your written approval.
Hurricane-Proof Front & Entry Doors
In Hillsborough County’s Wind-Borne Debris Region, any replacement door on an exterior opening must meet impact-resistance standards or be backed by approved shutter coverage. A hurricane-rated front door runs $2,800 to $5,000 installed, depending on design pressure and glass configuration. We specify units from PGT, CGI, and Therma-Tru with laminated glass interlayers that hold together under large-missile impact. This is the door swap that actually changes your Citizens or private carrier premium, but only if the permit is closed and the wind-mitigation inspection records the upgrade.
French & Double Doors
French doors on a Tampa patio or lanai face the same debris-region requirement as front entries. Expect $2,500 to $5,000 for a standard double-door opening with impact glazing installed to Florida Product Approval specifications. We measure the sightline and match the design pressure to the opening, not to whatever unit is sitting in a warehouse. If your current French doors are original to a 1970s home, they are almost certainly single-pane aluminum with no wind rating at all.
Replacement Doors
Most replacement door work in Tampa happens because the existing unit has failed, not because the homeowner wanted a style change. Fogged glass, sagging slabs, jambs that pull away from the block, doors that blow open under negative pressure during a storm. Our Door Installation team handles these as structural repairs first. We reframe, shim, flash, and seal to the opening’s actual condition, then install a unit rated for the wind zone. A standard replacement door with a mid-range insulated core and no glass runs $1,200 to $2,200 installed before any framing corrections.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Tampa
We install doors from PGT, CGI, and Therma-Tru, specified by what the opening requires and what your insurance carrier will accept. PGT’s WinGuard line is a common fit for Tampa’s coastal wind zone. CGI products carry Miami-Dade NOA ratings that Hillsborough County inspectors recognize on sight. Therma-Tru fiberglass entry systems hold up to Tampa’s salt air and humidity without warping the way older wood units do. If you already have a written estimate from another installer, bring it to us. We’ll review it at no charge and tell you if the spec matches the wind zone.
Common Door Installation Problems We See in Tampa Homes
- Unpermitted swaps that void insurance credit. A homeowner replaces a door, skips the permit, and later fails a wind-mitigation review because the inspector finds no record. We pull the permit on every replacement and close it properly.
- Rot behind the jamb on 1960s CBS openings. The old wood crumbles behind the new screws. We cut out the rot, reframe with pressure-treated lumber, and flash the opening before the new unit goes in.
- Doors with a Miami-Dade NOA but the wrong design pressure for Tampa. A rating is not a blanket approval. The opening needs a unit matched to its design pressure requirements under the Florida Building Code, and we specify that in writing.
- Jalousie doors and sidelites with zero wind-mitigation credit. Those louvered glass panels still found on Tampa porches and Florida rooms get flagged immediately by wind-mitigation inspectors. Until they’re replaced with code-compliant units, the homeowner pays the maximum unmitigated rate.
Pricing for Door Installation in Tampa, FL
Entry door replacement in Tampa runs $1,200 to $2,800 for a standard single unit without impact glazing. Hurricane-rated entry doors start around $2,800 and go to $5,000 for larger openings or custom configurations. French and double doors land between $2,500 and $5,000 installed. What moves the price: the opening’s design pressure requirement, whether the jamb needs reframing, glass area and lamination, and whether the permit triggers additional code upgrades. In older Tampa homes, the most common surprise is rot behind the jamb, and we write that allowance into the quote before we start. Call (509) 265-6387 and we’ll schedule a free in-home measure with a written price you can hold us to.
We Also Serve Cities Near Tampa
Our crews handle Door Installation in Tampa and the surrounding metro. We regularly work in Clearwater, Lakeland, Bradenton, and Sarasota. Scheduling is coordinated from our Miami South FL office, and Tampa-area crews serve every neighborhood locally.
Serving Tampa, FL - Our Local Coverage Area
We’re based in the Tampa area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Tampa
Yes. Replacing an unrated 1950s door with an impact-rated unit that passes a wind-mitigation inspection typically reduces the windstorm portion of your premium. The inspection itself costs $75 to $150 and must be done after the permit closes. We coordinate the inspection timing so the documentation matches the door we installed. Call (509) 265-6387 for an exact quote and we’ll walk you through what your carrier needs.
No. Jalousie doors get zero wind-mitigation credit under Florida’s insurance rating system, and replacing just the louvers does not change that. You need a code-compliant impact door or an approved shutter system on the opening. We replace the entire jalousie assembly with a hinged impact unit that seals against bugs, heat, and wind. Estimates are free.
It means the replacement door must meet Florida Building Code standards for impact resistance or be protected by an approved shutter system. In practical terms, a new door needs a Florida Product Approval or Miami-Dade NOA that matches the design pressure of your specific opening. We specify this in writing before ordering anything, and the permit stays on record after inspection.
We inspect the rough opening before quoting, and we write a framing allowance into the contract so the price is set in advance. On a 1962 CBS ranch in Seminole Heights, our crew pulled a failing aluminum entry door to find the original jamb pocket rotted behind the stucco and a door slab rated for neither design pressure nor large-missile impact. We reframed the opening to accept a Therma-Tru impact-rated unit with a laminated glass interlayer, pulled the permit, and passed the wind-mitigation inspection the same week the homeowner’s carrier had threatened cancellation. If rot appears that was not visible before demolition, you approve the additional work in writing before we touch it.
Generally no. A storm door does not satisfy wind-borne debris region requirements for a primary exterior opening unless the underlying door is already impact-rated. The wind-mitigation inspector evaluates the entire opening, not just the outer layer. Replacing the original door with a rated unit is the documented path to premium reduction. Call (509) 265-6387 and we’ll give you a written scope that names exactly what the opening requires.
What Door Installation Costs in Tampa
Tampa’s pricing runs parallel to the rest of Florida’s impact-rated market. Impact windows generally run $800 to $1,500 per window installed. Impact single-hung units land at $900 to $1,800. Large or custom openings, including double doors and wide fixed glass, sit between $2,500 and $5,000. Whole-home packages start around $8,000 and extend past $25,000 depending on opening count and wind zone requirements. What moves the price in Tampa: how many openings need debris-region compliance, whether the home sits in a high-wind zone along the Bay, what floor the unit is on, and whether the existing frame can be reused or must be reframed. We do a free in-home measure and give you a written quote that holds. Call (509) 265-6387 and schedule it.
Florida Pays You Back
The incentives for impact-rated door and window replacement stack, and Tampa homeowners should know what exists. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades, including impact-rated doors and windows. Florida exempts impact-resistant windows and doors from sales tax. The federal 25C energy credit returns 30% of product cost on qualifying units, up to $600 per year. And after a wind-mitigation inspection, many carriers reduce the windstorm portion of the premium by roughly 25%. The inspection runs $75 to $150 and must document the upgrades. Programs and carriers set final numbers, so we never promise a dollar amount from your insurer. But we do provide the documentation that lets you claim every credit you qualify for.
One comparison worth making: impact windows versus hurricane shutters. Shutters sit in a garage for eleven months of the year and require someone to hang them when a storm approaches. Impact-rated doors and windows are permanent protection. You never touch them again after installation. They work every day, not just during a warning. Big-box retail installers will sell you a door. They will not pull the permit, match the design pressure, or pass the wind-mitigation inspection. That part is the job, and it’s the part we do.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Tampa under the Haven Standard since 2012.