Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Windows & Doors in Chinatown, CA
Window installation in Chinatown, CA usually means working inside a 1930s masonry building where the original steel casement frames are rusted, the rough openings are no longer square, and the decorative transom above the window matters as much as the glass itself. We replace windows and doors across this dense mixed-use district where commercial storefronts sit directly beneath residential units, so one bad flashing detail affects two occupants. Call (509) 265-6387 to schedule a measured survey we hand you in writing before any work starts.
Why Chinatown Homes Are Different
Chinatown was purpose-built between 1938 and the early 1950s as a planned commercial and cultural district, which means the buildings share a construction logic that newer downtown towers do not. Most are two- and three-story unreinforced masonry structures with stucco-over-brick facades, original steel casement or single-pane aluminum windows, and ground-floor storefronts framed at custom widths to fit decorative pilasters and ornamental headers. Replacing one window here is rarely a straight swap.
The LA Basin heat island sits directly over this neighborhood. Summer interior temperatures in Chinatown run noticeably higher than in coastal West LA, so old single-pane steel windows cycle through thermal stress faster and their seals fail sooner. There is also no meaningful marine layer to moderate the swing. On Broadway and Hill Street, many shopfront doors were originally built to non-standard dimensions, and the moment a modern prehung unit meets that rough opening, the job becomes rough-opening reconstruction rather than a trim-and-caulk replacement. Out-of-area crews miss that until demolition day. We do not, because the measured survey happens before we quote.
Our Main Chinatown Services
Two services dominate the calls we get from Chinatown homeowners and building owners: full door replacement on those custom-width storefront and courtyard entries, and window replacement across aging residential units above the commercial ground floors.
Door Installation in Chinatown
Door installation here often starts with a discovery: the rough opening behind the trim was framed in 1938 for a door size nobody manufactures anymore. On Hill Street and Broadway especially, decorative pilasters and original lantern fixtures sit tight against the jambs, so a standard prehung unit will not land cleanly. We measure first, document what we find, and then order or fabricate to the actual opening rather than forcing a stock size into a space that was never built for it. Door Installation in Chinatown covers the full scope, from storefront systems to residential entries.

Window Replacement in Chinatown
Most window replacement jobs in Chinatown involve pulling original steel casements or single-pane aluminum sliders out of unreinforced masonry walls that have not been opened since the building went up. The masonry around the frame is often softened, the sill line has settled, and the replacement unit needs a custom pack-out to keep the glazing plane straight. We quote from a measured survey you keep, so the price you see on paper is the price on the invoice. Window Replacement in Chinatown walks through the typical project from first measurement to final photo record.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Chinatown

Window installation in Chinatown means fitting new units into 80-year-old masonry openings where the original steel frames are corroded and the surrounding stucco is decorative, not structural. The heat island here accelerates seal failure on old single-pane glass, so most owners replace because of failed seals, sticking sashes, and rising cooling costs rather than aesthetics alone. Window Installation is our core trade, and in this neighborhood it always begins with a measured survey we put in your hands before we put a price in your hands.
Single & Double Hung Windows
Signs you need it
The sash sticks in humid weeks, the lower panel won’t stay up without a prop, or you feel a draft even when the window is locked.
What it costs in Chinatown
Single and double hung installations in Chinatown typically run $700-$1,200 per window, including a written quote before any work begins.
How we do it
We remove the old sash and frame to expose the rough opening, square and pack the masonry as needed, install the new hung unit with continuous flashing, and document the finished job with photos.
Horizontal Roller Windows
Signs you need it
Rollers grind or bounce, the panel derails when opened past the halfway point, or condensation builds inside the frame after rain.
What it costs in Chinatown
Horizontal roller windows in this neighborhood generally fall between $650-$1,100 per opening depending on width and whether the original steel frame can take a direct insert.
How we do it
We measure the reveal and the existing frame depth, specify a unit sized for the original steel pocket, seat new rollers and track, and seal the perimeter against the masonry surround.
What Window Installation Costs in Chinatown
| Item | Typical range in Chinatown |
|---|---|
| Single & double hung window | $700-$1,200 per window |
| Horizontal roller window | $650-$1,100 per window |
| Rough-opening restoration (when required) | $250-$600 per opening, added to the unit cost |
How long does window installation take in Chinatown?
Most individual window replacements finish in a day, assuming the masonry rough opening is intact. When we uncover rotted sill framing or need to rebuild a custom-width opening, the job can extend to two days and the written quote reflects that before work starts. Call (509) 265-6387 for an exact estimate based on your building’s actual openings.
Will I lose the original window character on my building?
We can match the original sightline and muntin profile closely, including the appearance of steel-casement glazing bars, while using modern thermal frames. For buildings under community or cultural overlay review, we document the proposal and can provide the written survey as part of any application package. Call (509) 265-6387 to talk through your specific facade.
Impact Windows & Doors in Chinatown

Impact windows and doors in Chinatown are a retrofit play for buildings that predate modern wind-load codes and sit at the densest edge of downtown LA. Earthquake and wind events both test these masonry structures, and the original single-pane storefront glazing on Broadway was not designed for either. Impact Windows & Doors means laminated glass and reinforced frames that hold together even when struck, protecting the opening and everything behind it.
Impact-Resistant Windows
Signs you need it
Your building faces a street where debris could become a projectile in high wind, or you are replacing windows at street level on Broadway or Hill Street where security matters as much as wind load.
What it costs in Chinatown
Impact-resistant windows in Chinatown typically run $1,000-$2,500 per opening, with the range driven by frame material and whether the existing steel surround requires reconstruction.
How we do it
We thermally upgrade to laminated insulated glass units rated for the local wind zone, mechanically fasten the new frame into the masonry with epoxy-set anchors, and sign off with a photo record plus a written warranty.
Double Hung Impact Windows
Signs you need it
Upper-floor residential windows that are hard to secure from a fire escape, experience wind-driven rattling during Santa Ana events, or need replacement in a space where a single-hung design leaves half the opening unusable for ventilation.
What it costs in Chinatown
Double hung impact work in this area ranges from $1,200-$2,500 per window, including the laminated glass package and new jamb liners.
How we do it
We measure both sashes in the hung pair, order impact-rated insulated units with balanced springs, and install the upgraded frame with tilt-in sashes for cleaning and egress.
What Impact Windows & Doors Costs in Chinatown
| Item | Typical range in Chinatown |
|---|---|
| Impact-resistant window | $1,000-$2,500 per opening |
| Double hung impact window | $1,200-$2,500 per opening |
| Impact door (single entry or storefront) | $2,100-$4,700 per door |
Do Chinatown buildings require impact-rated glazing by code?
Most older Chinatown structures are not retroactively required to carry impact glazing, but street-level storefronts and openings facing dominant wind directions benefit from it, and some financing or insurance policies now request documented impact ratings. We provide the written testing docs with every unit. Call (509) 265-6387 with your street address for a straight answer.
Will impact windows change the look of my storefront?
Impact-rated glass is slightly heavier and may reduce the visible sparkle of a clear single pane, but modern laminated units from PGT and CGI read essentially the same at street distance. We can match your existing sightline and framing color before you commit. Call (509) 265-6387 to schedule a survey.
Energy-Efficient Windows in Chinatown

Energy-efficient windows in Chinatown directly counter the urban heat island that sits over this neighborhood, where interior temperatures in summer can run five to eight degrees hotter than in Santa Monica during the same afternoon. Cutting solar gain through the glass is the single highest-impact upgrade you can make to an uninsulated masonry building. Energy-Efficient Windows pairs low-emissivity coatings, argon fill, and warm-edge spacers with frames sized for these older openings.
Low-E & Argon Gas Glass
Signs you need it
Rooms on the west face of your building become uncomfortable by 3 p.m. in summer, or your cooling bill tracks the outdoor temperature and your existing glazing is single-pane from the 1940s.
What it costs in Chinatown
Low-E argon replacement glass in Chinatown generally runs $50-$95 per square foot of glass area, added to the frame installation cost.
How we do it
We specify a low-E coating tuned to the southern California sun angle, fill the insulated cavity with argon, and install with a warm-edge spacer that reduces edge condensation on humid mornings.
UV-Blocking & Fade Protection
Signs you need it
Flooring, artwork, or retail displays within eight feet of a window show visible fading within two to three years, or you manage a ground-floor storefront where afternoon sun bleaches merchandise behind the glass.
What it costs in Chinatown
UV-blocking window packages in this neighborhood typically add $40-$80 per square foot over a standard clear unit, depending on the laminate layer specified.
How we do it
We install laminated or coated glazing rated to block the majority of UV transmission without visibly darkening the room, then verify performance with before-and-after light meter readings noted on your project record.
What Energy-Efficient Windows Costs in Chinatown
| Item | Typical range in Chinatown |
|---|---|
| Low-E + argon gas glass | $50-$95 per sq ft of glass |
| UV-blocking package | $40-$80 per sq ft added |
| ENERGY STAR window (installed, per opening) | $1,900-$5,600 per window |
Will energy-efficient windows make my uninsulated building comfortable in summer?
They will reduce radiant heat gain through the glass by a measurable amount, which in a masonry building with no wall insulation is often the difference between 88° and 81° at 4 p.m. The walls still get warm, but the glass stops cooking the room. Call (509) 265-6387 for a window-level breakdown of what we can and cannot change.
What is the payback period in Chinatown?
On mixed-use buildings where a single meter covers the whole structure, payback typically lands between seven and twelve years, shorter if you are replacing broken-seal single panes that leak conditioned air. We can walk you through the math on your actual building during the free estimate. Call (509) 265-6387.
Sliding & Patio Doors in Chinatown

Sliding and patio door replacement in Chinatown often means reworking an opening that was never meant for a modern glazed slider, especially in rear courtyards and rooftop decks retrofitted onto 1940s buildings. The weight of a modern insulated glass door is often the first thing an old masonry header was not designed to carry. Sliding & Patio Doors in this district means sizing the track, the glass package, and the header reinforcement as one connected problem rather than three separate line items.
Sliding Glass Door Replacement
Signs you need it
The door scrapes or derails, the track is visibly bent or rotted, or you can feel outside air along the meeting rail even when the lock is thrown.
What it costs in Chinatown
Sliding glass door replacement in Chinatown runs $1,700-$4,500 per door, with the wider two- and three-panel units often landing at the top of that range after track rebuild.
How we do it
We remove the existing door and track, check header bearing and masonry attachment, install a new reinforced track bed, set the aluminum or vinyl slider, and adjust for level movement.
Impact Sliding Glass Doors
Signs you need it
Your glass door faces a courtyard or alley where wind funnels between buildings, or the door is on an upper floor where a shattered panel would rain glass into a pedestrian path below.
What it costs in Chinatown
Impact sliding glass door installations here typically run $3,000-$6,000 per door, driven by laminated glass thickness and whether the opening must be enlarged for modern code egress.
How we do it
We install an impact-rated laminated panel with reinforced interlock at the meeting rail, anchor the track to the slab or waterproofed sill, and test the lock and operation before final photos.
What Sliding & Patio Doors Costs in Chinatown
| Item | Typical range in Chinatown |
|---|---|
| Sliding glass door replacement | $1,700-$4,500 per door |
| Impact sliding glass door | $3,000-$6,000 per door |
| Screen door (retrofit to sliding unit) | $200-$500 per screen |
Can I replace one panel of a sliding glass door, or do I need both?
You usually need to replace the entire operating system because the door, frame, and rollers are all matched at the factory and worn as a set. Mixing old and new components undercuts the warranty. We will tell you in the written survey whether a track-only repair is actually an option. Call (509) 265-6387.
What if my patio door overlooks a public walkway?
On upper floors and angled openings, the glass spec matters for pedestrian safety, and we routinely call for laminated safety glass or tempered glazing where the code requires it. Your finished quote will state the exact glass makeup. We do not guess at glazing. Call (509) 265-6387 for a survey.
Impact Garage Doors in Chinatown

Impact garage doors in Chinatown mostly serve the narrow under-building parking bays and rear alley garages that were cut into these 1930s masonry structures, where the door is the largest and weakest wall in the building. A conventional sectional door racked by wind or forced by intrusion gives up the whole ground floor. Impact Garage Doors replaces that opening with a rated, reinforced system sized to the existing, often non-standard, architectural width.
Garage Door Replacement
Signs you need it
Door panels are dented or bowed, the tracks flex when the door is at mid-height, or the wood frame around the opening is soft where it meets the masonry.
What it costs in Chinatown
Garage door replacement in this neighborhood typically runs $2,100-$4,700, including motor and new springs when the existing door is a standard single-width unit.
How we do it
We strip the old door and track, inspect and re-anchor the track brackets into the masonry at every bearing point, install the new sectional door, and set the spring tension before testing the full cycle.
Hurricane-Rated Garage Doors
Signs you need it
Your parking bay faces a street or alley where wind can pressurize the building face, or the garage houses a workshop or storage you would not want to lose after a single impact.
What it costs in Chinatown
Hurricane-rated garage doors in Chinatown run $3,500-$7,000 depending on reinforcement package and motor, and include written product documentation.
How we do it
We install a rated sectional door with reinforced struts and track brackets, bolt every hinge and lag point into the existing masonry or structural wood, and set the opener with a lockout on the emergency release for security.
What Impact Garage Doors Costs in Chinatown
| Item | Typical range in Chinatown |
|---|---|
| Garage door replacement | $2,100-$4,700 per door |
| Hurricane-rated garage door | $3,500-$7,000 per door |
| Track and hardware re-anchoring into masonry | $400-$900 per door |
Are high-tension garage door springs dangerous to work on?
Yes. The torsion springs on a counterweighted garage door are under enough tension to cause serious injury or death if released incorrectly, and this is not a repair to attempt with hand tools and a video. We replace springs with the correct rated size and set tension as part of the door work. Call (509) 265-6387 if your door is off balance and bouncing.
Can you install on a garage that opens directly onto an alley?
We can, and the key measurement is the clear headroom above the door and the side room to the masonry. Many Chinatown alley garages have very tight clearances, so we often use a low-headroom track kit and side-mounted opener. We will document those clearances in the written quote. Call (509) 265-6387.
Custom & Geometric Windows in Chinatown

Custom and geometric windows in Chinatown are about preserving the neighborhood’s distinctive 1938-era fenestration while meeting modern performance standards. Arched transoms, round porthole windows, and ornate shaped openings are common on these decorative stucco facades, and they cannot be filled with stock rectangular units. Custom & Geometric Windows is the service that keeps that visual language intact when the glass has failed.
Arched & Curved Windows
Signs you need it
The existing arched unit is single-pane with visible seal failure, the wood or steel frame has rusted at the curve, or the glass is cracked along the radius and the opening cannot take a standard square insert.
What it costs in Chinatown
Arched and curved windows in this district run $1,500-$3,900 per unit depending on radius, glass package, and whether the original masonry opening is out of round and needs template re-profiling.
How we do it
We template the actual opening with a physical pattern, fabricate to that template rather than a nominal size, install with perimeter flashing that follows the curve, and photograph the finished radius.
Oversized Openings
Signs you need it
You have a storefront or residential bay wider than about six feet in a single aperture, a header span that sags at the center, or existing glass that flexes visibly during strong wind.
What it costs in Chinatown
Oversized custom glazing in Chinatown typically runs $2,800-$7,000 per opening, with the higher figure reflecting structural reinforcement and glazing units too large for a two-person carry.
How we do it
We measure the full bay, verify header bearing and deflection, specify a mullion or structural fin where needed, and install the oversized unit with mechanical lifting and anchoring details shown in your written quote.
What Custom & Geometric Windows Costs in Chinatown
| Item | Typical range in Chinatown |
|---|---|
| Arched or curved window | $1,500-$3,900 per unit |
| Geometric shaped window (circle, hex, triangle) | $1,700-$4,200 per unit |
| Oversized custom glazing | $2,800-$7,000 per opening |
Does the Chinatown community care about window shape?
It does, and that concern is built into the architecture. Many building owners and neighborhood groups watch upper-floor window replacements carefully because the original fenestration pattern contributes to the district’s character. A template custom unit usually clears concerns faster than a stock insert. Call (509) 265-6387 to discuss your building.
Why does custom glazing cost so much more than a stock window?
Because the glass is cut and tempered to a shape, the frame is fabricated to a physical template, and the opening has to accept a unit that may not correspond to any standard mullion or header spacing. You are paying for measurement and fabrication, not for marketing. Our written quote separates those items so you can see exactly what drives the number. Call (509) 265-6387.
Brands We Service in Chinatown
We install and replace units from PGT, CGI, CWS, and ES Windows, specified by the opening rather than by what is sitting in a warehouse. Common gaskets, rollers, and balance springs for these lines are stocked locally, and most replacement parts arrive within a week. See our brands for the full range.
Pricing for Windows & Doors in Chinatown, CA

| Service | Typical range in Chinatown |
|---|---|
| Single & double hung window installation | $700-$1,200 per window |
| Horizontal roller window installation | $650-$1,100 per window |
| Impact-resistant window | $1,000-$2,500 per opening |
| Double hung impact window | $1,200-$2,500 per opening |
| Low-E + argon glass | $50-$95 per sq ft |
| Sliding glass door replacement | $1,700-$4,500 per door |
| Impact sliding glass door | $3,000-$6,000 per door |
| Garage door replacement | $2,100-$4,700 per door |
| Arched or curved window | $1,500-$3,900 per unit |
| Oversized custom glazing | $2,800-$7,000 per opening |
In Chinatown, two things push prices past the middle of these ranges: non-standard rough openings that require masonry rework before the new unit can seat, and street-level storefronts where decorative pilasters and ornamental headers force custom fabrication rather than stock sizing. Every quote we write includes a measured survey you keep, and the price on that document is the price on the final invoice, without change orders.
Neighborhoods We Serve in Chinatown
Chinatown is compact but the building stock varies block by block, from the storefront-heavy stretch of Broadway to the quieter residential lanes around Alpine Park and up to the hill above Yale Street. We schedule by street and building type, not by neighborhood boundary, and a survey visit anywhere in the district usually happens within a few business days of your call.
- Central Plaza
- Broadway corridor
- Hill Street
- The Blossom Hill area
- Alpine Park blocks
Service Area - Cities Near Chinatown

We cover Chinatown and the wider metro area through local crews dispatched from our main office. Homeowners and property owners in Los Angeles, CA, San Diego, CA, San Jose, CA, and San Francisco, CA can reach the same written-quote process and the same Haven Standard documentation.
Serving Chinatown, CA - Our Local Coverage Area
We’re based in the Chinatown area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Chinatown

In most cases, like-for-like window replacement in existing openings does not require a building permit, but any change to the size or shape of the opening does. Storefront work along Broadway and Hill Street can also trigger design review because of the district’s architectural overlay. We tell you in writing whether your job needs a permit before you sign anything. Call (509) 265-6387 to check your building.
We can usually get a measured survey on the calendar within one to three business days for properties in Chinatown, and installation follows once the units are fabricated. Custom and impact units add lead time at the manufacturer. We will give you firm dates in the written scope, not a phone estimate. Call (509) 265-6387 to book the survey.
Yes, mixed-use is the dominant building type in Chinatown, and the two zones have different glazing, security, and code requirements. We inspect both in the same visit, document the storefront separately from the residential units, and quote each scope on the same written document. Call (509) 265-6387 to schedule a building-wide survey.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Chinatown Customers Say
"Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B."They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C."Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H.










Before
After
Before
After