Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Campbell, CA
Window installation in Campbell typically runs $650-$2,900 per opening depending on glass package and frame material, and most projects here are driven by one fact: the city’s 1950s-1970s ranch homes still carry their original single-pane aluminum. Those frames are now 50-70 years old, and Campbell’s own building department enforces Title 24 energy-code compliance on every replacement permit pulled, so you can’t swap glass for glass. You upgrade to dual-pane low-E, and the written quote you get from us reflects that from the first measurement. Call (509) 265-6387 to schedule yours.
Why Campbell Homes Are Different
Campbell’s housing stock is overwhelmingly single-story ranch construction from roughly 1952 to 1975, built on former prune and apricot orchard land as the city incorporated. The dominant window type is the wide horizontal aluminum slider, and most rear elevations carry a large aluminum sliding glass door that opens onto a patio or yard. Those aluminum frames sit in the sheltered floor of the Santa Clara Valley, where afternoon highs in the mid-80s°F strain aging seals and absence of coastal marine layer means no fog relief. The valley’s day-to-night temperature swings flex thin aluminum extrusions, breaking weatherstripping and opening air gaps that show up as drafts, condensation, and higher cooling bills.
Contractors working the Hacienda, Rincon, and older central-city tracts consistently find one pattern: rear patio sliders in 1960s slab-on-grade ranch homes have dropped out of plumb from decades of settling, making lock hardware misaligned or non-functional. Checking and re-plumbing the rough opening before any door replacement is a near-universal step in these neighborhoods because the slab has moved even when nobody noticed. That means a Campbell door job is rarely just a door; it’s a frame correction plus a door, priced and documented as one scope.
Our Main Campbell Services
When Campbell homeowners reach us, two projects dominate the call log: full door replacement and whole-home window replacement. Both are connected to the housing stock’s age and to Title 24 code enforcement, and each has a dedicated Campbell resource below.
Door Installation in Campbell
Replacing a rear sliding door or front entry on a 1960s Campbell ranch almost always involves re-plumbing the rough opening after slab settling has thrown the frame out of square. Our measured survey records the exact sightline and frame deviation before any product is ordered. The scope includes removing the original aluminum frame, correcting the opening, installing the new door level and plumb, and leaving a written record with photographs. For the full scope and local pricing, see Door Installation in Campbell.
Window Replacement in Campbell
Campbell homeowners replacing original aluminum sliders are doing two things at once: deferred maintenance and energy-code compliance. Title 24 requires dual-pane low-E glass on permitted replacements, so the discussion starts with U-factor and SHGC ratings, not just aesthetics. We specify products by what the opening faces, typically south and west elevations in Campbell get the highest solar-control glass. The complete price structure is on Window Replacement in Campbell.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterWindow Installation in Campbell
Window installation in Campbell replaces original aluminum single-pane sliders and double-hungs with code-compliant dual-pane units, and the average project runs between $650 and $2,900 per opening based on frame material and hardware. Most Campbell homes we measure still have their 1950s to 1970s horizontal aluminum frames, which now leak air, collect condensation between panes, and fail Title 24 requirements by a wide margin. We start every job with a measured survey you keep, then specify from CGI, CWS, or ES Windows based on which performance tier the opening actually needs. Our full service line is described on Window Installation.
Horizontal Roller Windows
Signs you need it
If your Campbell slider only opens with two hands, or you feel outside air moving around the sash on windy afternoons, the aluminum track and weatherstripping are at end-of-life.
What it costs in Campbell
Horizontal roller window replacement in Campbell typically runs $700-$1,800 per unit, including the Title 24-compliant dual-pane low-E glass.
How we do it
We remove the existing aluminum frame to the rough opening, correct any out-of-square condition, install the new roller window with positive drainage, and seal the perimeter.
Single & Double Hung Windows
Signs you need it
If the upper sash on a double-hung drifts down on its own, or you can hear street noise from Winchester Boulevard through closed windows, the sash balances and seals have failed.
What it costs in Campbell
Single and double hung window replacement in Campbell runs $850-$2,200 per window, with double hungs at the upper end when you add upgraded hardware and exterior color.
How we do it
We pull the interior stops, remove the old sashes, reset the frame to plumb, install new balances and sashes with compression bulb seals, and verify operation before trim goes back.
Casement Windows
Signs you need it
If the crank spins without moving the sash, or the latch no longer pulls the sash tight against the frame, the operator mechanism or hinge system has worn out.
What it costs in Campbell
Casement window replacement in Campbell generally lands between $1,100 and $2,600 per unit, depending on glass package and custom sizing.
How we do it
We remove the entire frame, install the new casement with adjustable stainless hinges, and square the unit to the opening before applying interior and exterior trim.
What Window Installation Costs in Campbell
| Item | Typical range in Campbell |
|---|---|
| Horizontal roller window (per unit) | $700-$1,800 |
| Single or double hung window (per unit) | $850-$2,200 |
| Casement window (per unit) | $1,100-$2,600 |
How long does window installation take in Campbell?
Most single-opening installs in Campbell finish the same day; a multi-room replacement typically spans 2-4 working days depending on how many openings and whether we’re re-plumbing rough openings on original ranch frames. Call (509) 265-6387 for a written project timeline with your estimate.
Will Campbell permits trigger Title 24 upgrades on my windows?
Yes, any replacement window permit in Campbell requires compliance with California Title 24 energy standards, which means dual-pane low-E glass with U-factor and SHGC values that meet current code. We specify and document those ratings in the written scope before any work starts.
Impact Windows & Doors in Campbell
Impact-rated windows and doors in Campbell typically cost $1,250-$3,800 per opening, and homeowners buy them for two reasons that converge here: wildfire-season air-tightness and the same structural hardening standards builders use in southern states. Campbell sits in the Santa Clara Valley, where falling embers and heat-driven pressure differentials test every opening on the home’s windward side. We specify impact products by opening role, and our full impact line lives on Impact Windows & Doors.
Impact-Resistant Windows
Signs you need it
If you’re in a Campbell neighborhood with mature street trees close to the house, or your insurance carrier is asking about window hardening, laminated impact glazing is a forward-looking fix.
What it costs in Campbell
Impact-resistant window installation in Campbell runs $1,250-$3,000 per unit for laminated glass in an aluminum or vinyl frame.
How we do it
We measure the opening, specify the correct impact laminate with a matching interlayer thickness for the elevation’s wind zone, and install with structural anchoring that transfers load to the frame.
Horizontal Roller & Sliding Impact Windows
Signs you need it
Original aluminum sliders on a single-story Campbell ranch have no interlayer protection; if a branch or debris breaks one pane, the entire unit shatters, and this is the easiest product to upgrade during a planned replacement.
What it costs in Campbell
Impact-rated horizontal roller and sliding windows in Campbell cost between $1,200 and $2,900 per unit depending on size and frame material.
How we do it
We replace the entire existing frame with an impact-rated roller or sliding assembly, level the track to the settled slab, and test the locking and roller operation before sealing.
What Impact Windows & Doors Costs in Campbell
| Item | Typical range in Campbell |
|---|---|
| Impact-resistant window (per unit) | $1,250-$3,000 |
| Impact sliding window (per unit) | $1,200-$2,900 |
| Impact door (per opening) | $2,600-$3,800 |
Do I need impact windows in Campbell if I’m not in a hurricane zone?
Campbell doesn’t carry a hurricane wind-load designation, but impact-rated laminated glass adds real fire-season and break-in resistance that standard dual-pane glass does not provide. The decision is performance-based, not a code requirement, and we’ll price both options in the same written estimate.
Can you match impact windows to existing 1960s aluminum sightlines?
We can’t reproduce thin 1960s aluminum sightlines with impact glass because the interlayer requires a deeper glazing pocket, but we specify modern frames with the slimmest profile that meets the impact rating. The result reads clean against original ranch styling without compromising the laminate.
Energy-Efficient Windows in Campbell
Energy-efficient window replacements in Campbell average $800-$2,800 per opening, and every permitted job in the city includes a mandatory dual-pane low-E glass pack because Title 24 is the governing standard. Campbell’s sheltered valley location means afternoon highs in the mid-80s°F combine with day-to-night temperature swings that punish old aluminum frames. We pick the glass package by what the opening faces, and the complete line is on Energy-Efficient Windows.
Low-E & Argon Gas Glass
Signs you need it
If you can feel heat radiating through west-facing glass on summer afternoons, your windows have no meaningful low-E coating, and your cooling system is paying the bill.
What it costs in Campbell
Low-E and argon-filled glass replacement in Campbell runs $800-$2,000 per window, including new framing and sealing.
How we do it
We remove the old unit, install a new insulated glass unit with low-E coating and argon fill, and record the U-factor and SHGC values in the written scope we hand you before work starts.
ENERGY STAR Replacement Windows
Signs you need it
If your original single-pane windows are still in place on a Campbell ranch home, they fail every current ENERGY STAR performance tier and are the single biggest envelope leak in the house.
What it costs in Campbell
ENERGY STAR replacement windows in Campbell cost $1,000-$2,800 per unit depends on frame material, glaze package, and opening size.
How we do it
We specify a package that meets or exceeds ENERGY STAR criteria for the Northern California climate zone, then install with a full perimeter seal and documented photo evidence.
What Energy-Efficient Windows Costs in Campbell
| Item | Typical range in Campbell |
|---|---|
| Low-E & argon gas window (per unit) | $800-$2,000 |
| ENERGY STAR replacement window (per unit) | $1,000-$2,800 |
| Whole-home energy retrofit (8-12 openings) | $9,000-$24,000 |
Will energy-efficient windows in Campbell qualify for rebates?
Campbell homeowners should verify current rebate status with their utility provider, because energy-efficiency programs change frequently and are not tied to the installer. We’ll document the glass specs and ratings in the written scope, which is what your application needs.
Do I have to switch to low-E glass if I’m only replacing one window in Campbell?
Technically yes, if the job is permitted through Campbell’s building department; Title 24 applies to each permitted opening, not just whole-home replacements. The upgrade adds roughly $100-$300 to your per-window cost compared with non-compliant clear glass, and it’s included in every quote we write.
Sliding & Patio Doors in Campbell
Sliding and patio door replacement in Campbell usually runs $1,800-$4,500 per door, and the most common issue by far is slab settling on 1960s ranch homes that has thrown the original aluminum frame out of square. On Campbell’s original rear-slider ranch stock, that means the door no longer locks securely, drags on the track, or leaks air at the jamb. We re-plumb the rough opening before any new door is set, and our product range is on Sliding & Patio Doors.
Patio Doors
Signs you need it
In a Campbell ranch home, a patio door that needs a hip to close, or shows daylight between the sash and jamb, has a settled frame that’s beyond adjustment.
What it costs in Campbell
Patio door replacement in Campbell starts around $1,800 and reaches $4,500 for custom sizing or a larger 3-panel configuration.
How we do it
We remove the old aluminum frame, measure and correct the rough opening for plumb and level, then set the new door with a full perimeter seal and adjustable locking hardware.
Sliding Glass Door Replacement
Signs you need it
If the original aluminum slider in a Campbell home has condensation between the glass, it’s an unsealed single-pane unit, and replacement is the only way to restore thermal performance.
What it costs in Campbell
Sliding glass door replacement in Campbell runs $2,000-$4,200 for dual-pane low-E units, with wider 3-panel sliders on the high end.
How we do it
We replace the full door assembly, including track, rollers, and locking hardware, and verify the slab-to-frame connection with photos in the before-and-after record we leave with you.
What Sliding & Patio Doors Costs in Campbell
| Item | Typical range in Campbell |
|---|---|
| Standard patio door (2-panel) | $1,800-$3,200 |
| Sliding glass door replacement (dual-pane) | $2,000-$4,200 |
| 3-panel sliding door | $3,500-$4,500 |
Can you fix my original 1960s sliding door in Campbell, or does it need to be replaced?
If the door is dropped out of plumb due to slab settling, the frame is usually beyond repair because 1960s aluminum extrusions distort rather than bend back; we’ll tell you which condition you have after we measure, and the written quote reflects the actual fix.
Will a new sliding door in Campbell meet current Title 24 standards?
Yes, any permitted sliding door replacement requires a dual-pane low-E glass package that meets the same Title 24 energy standards as windows. We order doors to those specs automatically on Campbell projects.
Impact Garage Doors in Campbell
Impact garage door installation in Campbell typically costs $2,200-$6,500 depending on door width, material gauge, and wind-load requirement. In a single-story ranch market where the garage often faces the street or an open yard, the door is the largest unrated opening on the home’s front elevation. Our full impact garage door line, including wind-load compliance, is described on Impact Garage Doors.
Hurricane-Rated Garage Doors
Signs you need it
If your Campbell garage door flexes noticeably under wind pressure, or the panels have begun to bow from years of valley sun exposure, it’s the largest weak point in the building envelope.
What it costs in Campbell
Hurricane-rated garage door installation in Campbell runs $2,200-$5,800 for a standard single or double opening, depending on panel gauge and reinforcement.
How we do it
We spec the door to the proper wind-load rating for the Campbell elevation and exposure, then install with reinforced tracks and hinges that transfer stress to the structure rather than the panel face.
Garage Door Replacement
Signs you need it
If the original wooden garage door on a 1950s Campbell ranch has rotted sills and sagging sections, or the steel replacement is dented enough to compromise the panel seams, replacement is the safest option.
What it costs in Campbell
Garage door replacement in Campbell ranges from $2,200 for a single steel door to $6,500 for an oversized two-car opening with insulation and premium hardware.
How we do it
We remove the old door, inspect and reinforce the framing, install the new door with a continuous, plus balance the springs and confirm the safety sensor alignment before we leave.
What Impact Garage Doors Costs in Campbell
| Item | Typical range in Campbell |
|---|---|
| Hurricane-rated single garage door | $2,200-$4,500 |
| Hurricane-rated double garage door | $4,800-$5,800 |
| Insulated impact garage door | $3,500-$6,500 |
Do I need an impact garage door in Campbell if the rest of my house isn’t impact-rated?
No code in Campbell requires impact garage doors, but if you’re hardening the rest of the envelope, the garage is the opening that’s most often skipped and easiest to solve. We’ll price impact and non-impact side by side so you can decide with real numbers, not speculation.
Will an impact garage door change how my Campbell garage handles hot afternoons?
Yes, impact-rated doors usually include insulated cores that slow heat transfer into the garage, which matters in a Campbell summer when the garage faces southwest. The insulation level is a spec decision we make with you before the order goes in.
Custom & Geometric Windows in Campbell
Custom and geometric window work in Campbell runs $1,100-$4,000 per opening, and it’s common on two fronts: mid-century ranch homes with original trapezoid or eyebrow elements, and additions that need a specific shape to follow a roofline. The tight lots in Campbell’s older central-city tracts often force a custom footprint, which means standard off-the-shelf windows don’t land. Our custom line is detailed on Custom & Geometric Windows.
Geometric & Shaped Windows
Signs you need it
If an original 1960s Campbell gable window is a one-off pentagon, hexagon, or trapezoid that no standard size can replace, it’s a geometric order by definition.
What it costs in Campbell
Geometric window replacement in Campbell ranges from $1,100 to $3,200 per unit, driven by how many sides the glazing has and whether the frame is wood or aluminum.
How we do it
We template the existing opening exactly, specify the shape with compound angles and glazing dimensions, and build the unit with the corners sealed at the factory before it ships.
Arched & Curved Windows
Signs you need it
If a curved-top Campbell window has visible condensation between panes or a bent frame from the original install, the curvature is custom, not something you can order from a catalog.
What it costs in Campbell
Arched and curved window replacement in Campbell runs $1,800-$4,000 per unit, depending on radius and whether the sash opens or is fixed.
How we do it
We measure the radius directly from the rough opening, order the curved glass and frame to that exact profile, and install the unit with a custom jamb that matches the existing or new trim.
What Custom & Geometric Windows Costs in Campbell
| Item | Typical range in Campbell |
|---|---|
| Geometric shaped window (per unit) | $1,100-$3,200 |
| Arched or curved window (per unit) | $1,800-$4,000 |
| Oversized custom opening | $2,600-$4,000 |
Can you match the exact shape of a mid-century geometric window in Campbell?
We template every angle and radius directly from the existing opening, so the new unit reproduces the original shape to the fraction of an inch. The written quote includes the fabrication drawing as part of the scope before you approve the order.
Will a custom window in Campbell trigger any special code review?
If the opening is non-standard, the window must still meet Title 24 glazing requirements, but the shape itself doesn’t add permit complexity beyond the standard review. We’ll prepare the spec sheet so the permit package moves without revision.
Brands We Service in Campbell
We service and replace windows and doors from PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. We keep parts and warranty channels open for all eight lines, and we can usually source non-stock hardware within a week. See our brands for the full catalog.
Pricing for Windows & Doors in Campbell, CA
| Service | Typical range in Campbell |
|---|---|
| Horizontal roller window (per unit) | $700-$1,800 |
| Single or double hung window (per unit) | $850-$2,200 |
| Casement window (per unit) | $1,100-$2,600 |
| Impact resistant window (per unit) | $1,250-$3,000 |
| Impact sliding window (per unit) | $1,200-$2,900 |
| Low-E & argon glass window (per unit) | $800-$2,000 |
| Energy Star replacement window (per unit) | $1,000-$2,800 |
| Standard patio door (2-panel) | $1,800-$3,200 |
| Sliding glass door replacement (dual-pane) | $2,000-$4,200 |
| Impact garage door (single) | $2,200-$4,500 |
| Geometric shaped window (per unit) | $1,100-$3,200 |
| Arched or curved window (per unit) | $1,800-$4,000 |
Prices in Campbell move with opening size, frame re-plumbing on settled slabs, and how many elevations of the house are part of the same scope. Every quote we issue is written before any work starts, and the price does not change unless you change the scope after approval.
Neighborhoods We Serve in Campbell
We run full crews through every residential tract in Campbell, and the work here splits into older central-city ranch stock and newer infill construction. Response time for a measured survey anywhere in Campbell is usually 2-3 business days.
- Hacienda
- Rincon
- Central Campbell (downtown neighborhoods)
- Dry Creek area
- West Campbell neighborhoods
Service Area - Cities Near Campbell
We also serve homeowners in the surrounding Santa Clara Valley communities, including Saratoga, CA, Los Gatos, CA, Santa Clara, CA, and Cupertino, CA. Each city has its own housing stock, but the same written-price-before-work standard applies everywhere we go.
Serving Campbell, CA - Our Local Coverage Area
We’re based in the Campbell area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Campbell
We can usually schedule a measured survey within 2-3 business days anywhere in Campbell, and the written quote is produced at that same visit. You keep the measurement document whether you hire us or not. Call (509) 265-6387 to set up the survey.
Most window and door replacements in Campbell require a building permit because the city enforces Title 24 energy standards, and we prepare and pull the permit package as part of the scope. Our written quote itemizes the permit fee separately so there’s no ambiguity.
Yes, we’ll coordinate with an HOA’s architectural review process when it applies, and the product specs and window schedules we produce are formatted for those committees. We keep the submission package documented so there’s a written record of what was approved.
Call (509) 265-6387 to schedule your free measured survey and written estimate. We’ll put the numbers in writing before any tool is lifted, and you’ll keep the document either way.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Campbell Customers Say
"Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B."They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C."Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H.