Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Austin, TX
Window installation in Austin means working with a housing stock that spans a century, a climate that punishes cheap seals, and a municipal energy code stricter than the Texas baseline. Whether you’re in a 1930s Hyde Park bungalow with original wood sash or a 2018 production home in Mueller whose builder-grade vinyl is already failing, the work starts with a measured survey you keep, not a guess. Call (509) 265-6387 for a written price before any work starts.
Why Austin Homes Are Different
Austin sits on Blackland Prairie Vertisols, expansive black-clay soils that swell and shrink with every wet-dry cycle. That movement throws door frames out of square: we see sticky exterior doors, non-latching strikes, and threshold gaps in Crestview and Allandale that have little to do with the door itself and everything to do with the ground under the slab. Austin Energy’s green-building program adds another layer, enforcing SHGC and U-factor thresholds above the Texas state minimum, which means a replacement window here has to meet solar-heat-gain specs a contractor working a CPS Energy or Oncor territory never encounters.
The housing stock compounds the challenge. Hyde Park and Clarksville hold 1920s-40s wood-frame homes with single-pane wood sash, many in non-standard rough-opening sizes that don’t match modern catalog dimensions. Mid-century brick ranches in Allandale and Crestview often retain steel casement or jalousie units that leak air and rattle in wind. The 2010s-2020s wave added thousands of builder-grade vinyl double-pane IGUs whose spacer seals are now failing under Austin’s thermal extremes. Winter Storm Uri exposed the rest: sub-teens temperatures caused widespread seal failure, condensation between panes, and warped thresholds citywide.
Our Main Austin Services
Two calls dominate our Austin schedule: homeowners who need a door that actually latches square, and homeowners replacing windows that can’t hold a seal or a temperature. Both start with the same document: a measured survey you keep.
Door Installation in Austin
Doors in Austin fail in predictable patterns: foundation movement from black-clay soils throws frames out of square, west-facing afternoon sun warps slabs and jambs, and cedar-season pollen finds every gap in the weatherstripping. We measure the rough opening, shim to square, and install the door so the reveal is even and the sweep seals tight. Door Installation in Austin covers full replacement, frame repair, and threshold correction for wood, steel, and fiberglass entry systems.
Window Replacement in Austin
Most Austin window replacement calls involve one of three failures: failed IGU seals (fog between panes), warped vinyl frames from west- and southwest-facing sun, or single-pane originals that can’t meet Austin Energy’s U-factor and SHGC requirements. We pull the old unit, inspect the rough opening, correct any framing issues, and install to manufacturer spec with a documented photo record when the job is done. Window Replacement in Austin covers the full scope, from single- unit swaps to whole-home replacement.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterWindow Installation in Austin
Window installation in Austin spans original 1920s wood sash in Hyde Park, mid-century steel casement in Crestview, and failing builder-grade vinyl in the 2010s production-home belt. The common thread is thermal stress: 100°F+ summers, brutal west-facing sun, and rare freezes that push old frames and weak seals past their tolerance. We install every unit to the rough opening as measured, not as estimated, and the written quote travels with that same measured survey. For a fuller look at the process, see Window Installation.
Single & Double Hung Windows
Signs you need it
Sash windows that won’t stay up, rattle in wind, or have visible condensation between panes are failing.
What it costs in Austin
Single and double hung window installation in Austin typically runs $450-$1,200 per opening depending on size and frame material.
How we do it
We remove the old sash and frame, inspect the rough opening for rot and square, flash and plumb the new unit, insulate, and trim to spec.
Casement Windows
Signs you need it
Cranks that grind, frames that won’t close tight, or glass that fogs signal a casement replacement.
What it costs in Austin
Casement window installation in Austin typically runs $700-$1,700 per opening, with larger and custom-swing units at the top of that range.
How we do it
We measure the rough opening, remove the old unit, install the new casement with level reveals, seal the perimeter, and test the crank and locking mechanism.
What Window Installation Costs in Austin
| Item | Typical range in Austin |
|---|---|
| Single hung window (per opening) | $450-$750 |
| Double hung window (per opening) | $600-$1,200 |
| Casement window (per opening) | $700-$1,700 |
How long does window installation take in Austin?
Most single-room window installations finish in one day; whole-home replacements usually run two to four days depending on opening count. Your written quote includes a schedule, and we arrive on it.
Will my Austin window replacement meet Austin Energy standards?
Yes. Every window we install in Austin is specified to meet or exceed Austin Energy’s SHGC and U-factor thresholds, which run stricter than the state baseline. Call (509) 265-6387 for a written quote.
Impact Windows & Doors in Austin
Impact windows and doors in Austin do double duty: they hold up to windborne debris during severe storms, and they cut solar heat gain during the 100°F+ months that dominate the calendar. Winter Storm Uri proved that Austin homes need real engineered protection, not builder-grade glass rated for mild climates. We specify impact units from PGT and CGI based on the exposure map for your specific address. For the full scope of Impact Windows & Doors, including product specs and test ratings, see the hub page.
Impact-Resistant Windows
Signs you need it
If your home faces open exposure, has original single-pane glass, or sits in a windborne debris zone, impact-rated glazing is the difference between a sealed envelope and a breached one.
What it costs in Austin
Impact-resistant window installation in Austin typically runs $900-$2,200 per opening, with size and design pressure the main variables.
How we do it
We measure the opening, order the unit to the design pressure your exposure requires, install with impact-rated fasteners and sealant, and document the finished install with photos.
Double Hung Impact Windows
Signs you need it
Double hung units with failed seals or single-pane glass in a high-exposure area need impact-rated replacements.
What it costs in Austin
Double hung impact window installation in Austin typically runs $1,100-$2,200 per opening.
How we do it
We remove the old sash and frame, verify the rough opening, install the impact-rated double hung with heavy-gauge framing, and test both sash for smooth travel.
What Impact Windows & Doors Costs in Austin
| Item | Typical range in Austin |
|---|---|
| Impact-resistant window (per opening) | $900-$2,200 |
| Double hung impact window (per opening) | $1,100-$2,200 |
| Impact sliding glass door | $2,500-$6,000 |
Do I need impact windows in Austin?
Most Austin homes aren’t in a mandatory windborne debris zone, but if you’re replacing glass anyway, impact-rated units add storm resistance and cut heat gain. We’ll tell you if the spec is warranted for your exposure.
Can impact glass reduce my Austin cooling bills?
Yes. Impact-rated glazing typically includes low-E coatings and laminated glass that reflect solar heat, which matters on west-facing elevations in Austin. Call (509) 265-6387 for a written price.
Energy-Efficient Windows in Austin
Energy-efficient windows in Austin have to clear a higher bar than anywhere else in Texas: Austin Energy enforces SHGC and U-factor thresholds stricter than the state code, so a cheap low-E unit won’t pass. The west- and southwest-facing afternoon sun here degrades vinyl frames and IGU spacer seals faster than nearly any comparable Sun Belt city, which means the glass spec and the frame material both matter. We specify units from CWS and ViewLux by performance tier, matched to the orientation of each opening. Learn more about Energy-Efficient Windows on the service hub.
Low-E & Argon Gas Glass
Signs you need it
Rooms that run 10-15°F hotter than the rest of the house on summer afternoons, or glass that radiates heat from three feet away, are failing thermally.
What it costs in Austin
Low-E argon-filled window installation in Austin typically adds $90-$250 per window over standard clear glass, depending on coatings and gas fill.
How we do it
We specify the low-E coating and gas fill for the orientation, install the unit, and verify the U-factor and SHGC on the label before we leave.
ENERGY STAR Replacement Windows
Signs you need it
If your current windows predate the ENERGY STAR South-Central zone criteria or show condensation and draft, they’re costing you cooling dollars.
What it costs in Austin
ENERGY STAR replacement window installation in Austin typically runs $500-$1,400 per opening depending on frame material and glass package.
How we do it
We remove the old unit, install the ENERGY STAR-rated replacement, seal the perimeter, and document the energy label and finished installation in your photo record.
What Energy-Efficient Windows Costs in Austin
| Item | Typical range in Austin |
|---|---|
| Low-E argon window upgrade (per unit) | $90-$250 over standard glass |
| ENERGY STAR window (per opening) | $500-$1,400 |
| UV-blocking laminated glass (per opening) | $800-$1,800 |
What SHGC should my Austin windows have?
For Austin, a SHGC of 0.25 or lower on west- and south-facing glass is the practical target for cutting solar gain. Austin Energy’s program sets the floor; we specify to the orientation, not the minimum.
Will energy-efficient windows pay for themselves in Austin?
On west-facing elevations in 100°F+ summers, the cooling reduction is measurable and immediate. Your written quote includes the spec, so you know exactly what you’re paying for. Call (509) 265-6387 for details.
Sliding & Patio Doors in Austin
Sliding and patio doors in Austin take a beating from three directions: foundation movement from black-clay soils throws tracks out of alignment, west-facing afternoon sun warps vinyl frames, and Winter Storm Uri exposed how many thresholds were never engineered for freeze-thaw cycling. A sliding door that sticks, drags, or leaks air is a frame problem as often as a roller problem here. We replace the full unit, correct the rough opening, and leave a documented photo record of the install. See Sliding & Patio Doors for the full scope of door types and hardware.
Patio Doors
Signs you need it
A patio door that needs a shoulder to open, won’t latch, or shows daylight at the threshold is failing.
What it costs in Austin
Patio door installation in Austin typically runs $1,800-$4,500 depending on size, material, and glass package.
How we do it
We measure the opening, remove the old door, correct any frame deflection, install the new unit with level reveals, and seal the threshold against air and water.
Sliding Glass Door Replacement
Signs you need it
Fogged glass, bent tracks, or a door that jumps its rollers signal a sliding glass door that’s past adjustment.
What it costs in Austin
Sliding glass door replacement in Austin typically runs $1,600-$4,200 per door, with impact-rated units at the top of that range.
How we do it
We remove the old panel, inspect the track and frame, install the new sliding unit with new rollers and lock, and test the full travel before documenting the job.
What Sliding & Patio Doors Costs in Austin
| Item | Typical range in Austin |
|---|---|
| Patio door (per opening) | $1,800-$4,500 |
| Sliding glass door replacement | $1,600-$4,200 |
| Screen door installation | $150-$400 |
Why do sliding doors stick in Austin?
Expansive black-clay soils under the slab move with moisture, which racks the header and throws the track out of alignment. We re-square the opening before installing the new unit, so the door travels freely.
Can you fix my sliding door instead of replacing it?
Sometimes. If the frame is square and the glass is intact, new rollers and track adjustment can buy years. We’ll tell you which one your door needs, in writing. Call (509) 265-6387 for an honest read.
Impact Garage Doors in Austin
Impact garage doors in Austin address a specific vulnerability: garage openings are the largest unbraced span in most homes, and wind-load failures start there. The teardown-and-infill cycle in central neighborhoods creates constant demand for correctly sized replacements in non-standard older dimensions, while the 2010s production-home wave left thousands of thin-gauge panels that flex under pressure. We engineer the door to the wind-load zone your address sits in, not the ZIP code average. For the product scope, see Impact Garage Doors.
Hurricane-Rated Garage Doors
Signs you need it
If your garage door bows under hand pressure, rattles in high wind, or lacks braces on a wide opening, it’s not engineered for Austin’s storm events.
What it costs in Austin
Hurricane-rated garage door installation in Austin typically runs $2,200-$5,500 for a standard two-car opening, with size and reinforcement the main variables.
How we do it
We measure the opening, order the door to the required wind-load rating, reinforce the track and jambs, install the panel sections, and test the full cycle.
Wind-Load Code Compliance
Signs you need it
If you’re selling, insuring, or renovating a home in an Austin exposure zone, an undocumented door can fail inspection.
What it costs in Austin
Wind-load code compliance work in Austin typically adds $300-$800 over standard door cost for engineering and reinforcement.
How we do it
We review your address against the current wind-load map, spec the door and track to code, install with rated fasteners, and leave the compliance documentation in your photo record.
What Impact Garage Doors Costs in Austin
| Item | Typical range in Austin |
|---|---|
| Hurricane-rated garage door (two-car) | $2,200-$5,500 |
| Garage door replacement (standard) | $1,300-$3,200 |
| Wind-load compliance reinforcement | $300-$800 over standard |
Does my Austin garage door really need impact rating?
It depends on your exposure zone and whether the opening faces the prevailing wind. We’ll check the map for your specific address and tell you in writing if the spec is required or optional.
Can an impact garage door reduce my cooling load?
Garages aren’t conditioned space in most Austin homes, but an insulated impact door cuts radiant heat transfer to adjoining rooms. Call (509) 265-6387 for a written price.
Custom & Geometric Windows in Austin
Custom and geometric windows in Austin often carry the oldest openings in the city: 1920s-40s bungalows in Hyde Park and Clarksville with arched, round, or diamond-shaped sashes that no catalog unit will fit. The teardown-and-infill cycle in central neighborhoods creates another source of custom work, new rough openings in non-standard dimensions that need correctly sized units on the first order. We fabricate to the opening as measured, which is why the measured survey you keep is the foundation of the job. See Custom & Geometric Windows for the full fabrication scope.
Geometric & Shaped Windows
Signs you need it
If your original shaped window has a cracked lite, failed seal, or single-pane glass in a room you use daily, it needs a matched replacement.
What it costs in Austin
Geometric and shaped window fabrication in Austin typically runs $1,200-$3,000 per unit, driven by complexity and glass count.
How we do it
We take the opening measurements, template the shape, order the unit to spec, install with the same reveal and sightline as the original, and photograph the finished lite.
Arched & Curved Windows
Signs you need it
An arched window with a failing frame, fogged glass, or rot at the sill is past repair and needs matched replacement.
What it costs in Austin
Arched and curved window installation in Austin typically runs $1,500-$3,500 per opening depending on radius and frame material.
How we do it
We measure the arch with a template, fabricate the curved unit, install it with even reveals, and document the sightline from inside and out.
What Custom & Geometric Windows Costs in Austin
| Item | Typical range in Austin |
|---|---|
| Geometric shaped window (per unit) | $1,200-$3,000 |
| Arched window (per opening) | $1,500-$3,500 |
| Oversized opening (per opening) | $2,000-$5,000 |
Can you match the original windows in my Hyde Park bungalow?
Yes. We template the existing shape and match the sightline and glass pattern, so the replacement reads as original while meeting modern U-factor and SHGC thresholds.
How long does custom window fabrication take in Austin?
Most custom units fabricate in two to four weeks depending on shape complexity and glass availability. The written quote includes the schedule. Call (509) 265-6387 to start.
Brands We Service in Austin
We stock parts and service windows and doors from PGT, CGI, CWS, and ViewLux, among the eight manufacturer lines we specify by performance tier and price range. Most common replacement glass and hardware arrives within five to seven business days in Austin. See our brands for the full line card.
Pricing for Windows & Doors in Austin, TX
| Service | Typical range in Austin |
|---|---|
| Single hung window installation (per opening) | $450-$750 |
| Double hung window installation (per opening) | $600-$1,200 |
| Casement window installation (per opening) | $700-$1,700 |
| Impact-resistant window (per opening) | $900-$2,200 |
| ENERGY STAR replacement window (per opening) | $500-$1,400 |
| Low-E argon glass upgrade (per unit) | $90-$250 over standard |
| Patio door installation (per opening) | $1,800-$4,500 |
| Sliding glass door replacement (per door) | $1,600-$4,200 |
| Hurricane-rated garage door (two-car) | $2,200-$5,500 |
| Geometric shaped window (per unit) | $1,200-$3,000 |
What pushes price up in Austin is orientation and opening condition: west-facing glass needs lower SHGC coatings, and older rough openings in Hyde Park or Clarksville often need framing correction before the new unit goes in. You get a written price before any work starts, always, and the measurement behind that price is the same document as the final invoice.
Neighborhoods We Serve in Austin
We work across Austin’s central and northern neighborhoods, from the wood-framed bungalows of Hyde Park and Clarksville to the mid-century ranches of Allandale and Crestview, and through the newer production-home developments in Mueller and the surrounding infill corridors. Our crews coordinate from the Austin office and schedule in sequence, so response time holds within the metro.
- Hyde Park
- Clarksville
- Allandale
- Crestview
- Mueller
Service Area - Cities Near Austin
Beyond Austin proper, our crews serve the northern metro through Pflugerville, TX, Cedar Park, TX, Round Rock, TX, and Leander, TX. Each of those areas carries its own soil and housing-stock pattern, and the measured survey accounts for it before the written price is issued.
Serving Austin, TX - Our Local Coverage Area
We’re based in the Austin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Austin
For like-for-like replacements that don’t alter the opening size, most Austin residential work doesn’t require a permit. Changes to opening dimensions, structural headers, or historic district properties in Hyde Park or Clarksville may. We’ll flag it in your written scope.
Standard installations schedule within one to two weeks of the measured survey, depending on product lead time. Custom fabrication runs longer. Your written quote includes the schedule date, and we arrive on it. Call (509) 265-6387 to book the survey.
A written price before work starts, a measured survey you keep, and a documented photo record when the job is done. Those three things eliminate most disputes before they start.
Call (509) 265-6387 to schedule your free measured survey and get a written price for your Austin window or door project.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Austin Customers Say
"Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H."Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T."The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R.