Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Installation Across Morgan Hill
Door installation in Morgan Hill carries a set of local complications that most Bay Area installers never see. The 1984 Calaveras Fault earthquake left a meaningful share of 1980s-era homes with door rough openings racked a quarter to half inch out of plumb, and the southern Santa Clara Valley’s thermal corridor punishes seals and weatherstripping harder than anything 15 miles north in San Jose. We know this because we work in these neighborhoods every week. If you’re pricing a new entry door, a replacement door, or French doors in Morgan Hill, call us at (509) 265-6387 and we’ll give you a written price before any work starts. That’s how we’ve operated since 2012, and it’s written into the Haven Standard that governs every job we take.
Why Sightline Windows & Doors Is Morgan Hill’s Preferred Door Installation Company
Sonia Raman leads our team, and she’s built Sightline around a simple discipline: the measurement and the written quote are the same document. When we survey a door opening in Morgan Hill, you keep the measured survey. The written scope that follows cannot differ from it. That’s Haven Clause 1, and it’s why homeowners who research contractors before calling tend to find us in the first place.
Our technicians are background-checked, uniformed, and identified by license number before they arrive at your door. Haven Clause 3 puts the person on the record before they step onto your property. We don’t do subcontractor roulette, and we don’t send someone who has never worked in Morgan Hill’s housing stock to figure it out on your threshold.
Every completed job leaves a documented photo record, and every installation is covered by the 365-Day Done Right Promise: if it’s not done right, we make it right. These aren’t verbal assurances. They’re clauses in a written standard we’ve applied to more than 18,000 openings since 2012.
We also answer the phone. A live person, 24/7, not a voicemail queue. When you’re comparing door installers in Morgan Hill, that matters before the job starts and after it’s finished.
Our Door Installation Services in Morgan Hill

Our Door Installation team handles the full range of entry and replacement work across Morgan Hill, from starter homes near Cochrane Road to wine-country estates off Watsonville Road. Here’s what we install most often.
Entry Doors
A new entry door in Morgan Hill has to do two jobs at once: carry the architectural look of your home and seal against wind gusts that come through the southern valley every summer afternoon. We spec fiberglass doors from Therma-Tru or steel doors where impact rating matters, and we match the reveal, the threshold, and the weatherseal to the actual condition of your rough opening, not a manufacturer’s ideal dims. Most Morgan Hill entry door installations run $2,800 to $6,500 depending on glass package and hardware.

Replacement Doors
Older stucco-over-frame tract homes from the 1980s and 1990s are the bulk of our replacement work in Morgan Hill. The original doors on these homes were often builder-grade hollow core units with aluminum thresholds that have since corroded or bowed. We remove the old frame down to the rough opening, correct any racking from Calaveras Fault settling, and set a new pre-hung unit with custom shims. Typical replacement door work in Morgan Hill runs $2,200 to $5,800 including frame correction and disposal.

French & Double Doors
French doors in Morgan Hill fail most often at the meeting stile, the astragal, and the threshold, because thermal expansion in 100-degree afternoons works against the door’s own geometry. We install French and double door systems from PGT and CWS, specified with the right U-factor and SHGC for a south-facing exposure in the southern valley. For a standard 5-foot or 6-foot double door opening, expect $4,500 to $11,000 in the current Morgan Hill market, depending on glass and frame material.

Storm & Exterior Doors
Not every Morgan Hill home needs a full replacement. A well-fitted storm door adds a second weather barrier and extends the life of an existing entry door, which is practical when afternoon winds are constantly working the primary seal. We install storm and exterior doors with self-storing glass and heavy-duty closers, usually $1,400 to $3,200, and we’ll tell you honestly if your money is better spent on a full replacement instead.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Morgan Hill
We install from a defined set of manufacturer lines, selected by performance tier and price range rather than by what’s sitting in a warehouse. For Morgan Hill’s heat and wind conditions, we commonly specify Therma-Tru for fiberglass entry doors, PGT for impact-rated and French door systems, and CWS for custom configurations. Because we work from eight manufacturer lines, we can match the right product to the opening’s actual requirements. If you bring us a competitor’s written estimate, we’ll review it at no charge and show you where the numbers differ, line by line.
Common Door Installation Problems We See in Morgan Hill Homes

- Rough openings out of plumb from the 1984 earthquake. Homes in Jackson Oaks, Paradise Valley, and other 1980s subdivisions routinely show a quarter to half inch of racking at the door rough opening. Flat-rate quotes calibrated to Gilroy or Sunnyvale never anticipate the extra shimming and squaring time, so the installer either rushes the frame or pads the final invoice. We measure for this specifically.
- Weatherstripping and sweeps that degrade faster than expected. Morgan Hill’s position in the southern Santa Clara Valley thermal corridor means persistent afternoon gusts that work door seals relentlessly. We see seals that should last a decade fail in five years, especially on doors facing west or southwest toward the foothills.
- Thermal expansion causing doors to stick or bind in summer. When afternoons hit 95 to 105 degrees, aluminum and vinyl frames expand enough to change door geometry. A door that closes fine in January might bind in August. We account for expansion tolerance when we set reveals, and we explain it in the written scope.
- Solar heat gain driving up cooling costs. South-facing and west-facing doors in Morgan Hill take direct afternoon sun. Single-pane glass or builder-grade double pane translates into real cooling load. Low-E coatings and the right SHGC (solar heat gain coefficient) are standard parts of our door specifications here, not upgrades.
Pricing for Door Installation in Morgan Hill, CA
Here’s what we see in the current Morgan Hill market, and these numbers are written into quotes, not estimated over the phone and revised later.
| Door Type | Typical Range in Morgan Hill |
|---|---|
| Replacement door, single entry, mid-grade fiberglass | $2,200 - $3,800 |
| Entry door, premium fiberglass or steel with Low-E glass | $3,800 - $6,500 |
| French or double door system | $4,500 - $11,000 |
| Storm or exterior door | $1,400 - $3,200 |
| Frame correction for out-of-plumb rough openings | $350 - $900 depending on severity |
What moves the number: the condition of your rough opening, the glass package, the frame material, and whether the opening needs custom shimming from earthquake settling. The written quote we give you before work starts is the price you pay. No change orders, no revised invoice. Call (509) 265-6387 to schedule a measured survey.
We Also Serve Cities Near Morgan Hill

Our crews work throughout the South Bay and surrounding valleys. If you’re in Gilroy, Watsonville, Los Gatos, or Campbell, we provide the same written-price model and the same 365-Day Done Right Promise. This page focuses on Door Installation in Morgan Hill, but our service line runs the length of the Santa Clara Valley and south into the Pajaro Valley.
Serving Morgan Hill, CA - Our Local Coverage Area
We’re based in the Morgan Hill area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Morgan Hill

The Calaveras Fault affects door installation in Morgan Hill by leaving rough openings in many 1980s-era homes racked a quarter to half inch out of plumb from the 1984 earthquake’s structural settling, which means a door installed without custom shimming and frame correction will not close square and will not seal properly. We measure each rough opening independently, square the jamb with shims, and document the correction in your written scope. If you suspect your door frame has settled, call (509) 265-6387 and we’ll put numbers on it during a free measured survey.
Door seals fail faster in Morgan Hill because the city sits in the southern Santa Clara Valley’s thermal corridor, where persistent afternoon gusts and summer highs in the high 90s to low 100s work weatherstripping and door sweeps harder than the milder conditions 15 miles north in San Jose. The same valley geography that makes the area known among hang gliders also channels wind directly against west-facing doors. We specify seal materials rated for sustained thermal and UV stress, and we’ll show you the product specs in writing. The free estimate covers seal condition as part of the survey.
For Morgan Hill’s summer heat, Low-E insulated glass with a low SHGC (solar heat gain coefficient) of 0.25 or lower is the spec we recommend for south-facing and west-facing doors, because it blocks the bulk of solar radiation that drives up cooling costs during 95 to 105-degree afternoons. Glass with a higher SHGC makes sense on a shaded north side where you want passive warmth. We’ll run the numbers for your exposure and put the recommended glass package in the written quote. Call (509) 265-6387 to get specific numbers for your house.
Most Morgan Hill homes do not require an impact-rated entry door by code, since the city is not in a coastal wind-borne debris zone, but impact-rated doors from PGT or CGI make sense for homes in fire-prone or high-wind edges of the foothills, and some wine-country estates choose them for insurance reasons. If you’re unsure, we’ll check the code requirements for your specific street and tell you honestly whether impact rating is a need or a preference. The quote will reflect exactly what’s required, not what we’d prefer to sell.
We coordinate with architects and designers from the first measured survey onward, using the same document trail the homeowner keeps: the measured survey, the written scope, the photo record, and the written warranty. On custom or wine-country estate doors in Morgan Hill, the schedule is driven by manufacturer lead times measured in weeks, not by labor availability, and the long-lead items, custom millwork, hardware, specialty glass, get ordered against a price fixed in writing before anything is fabricated. Bring us your architect’s drawings or your designer’s finish schedule, and we’ll build the door spec to match. The review of a competitor’s written estimate is free, and our written quote is the same document as our measurement.
Written by Sonia Raman, Owner at Sightline Windows & Doors, operating under the Haven Standard since 2012.










Before
After
Before
After