Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Stanton, CA
Window installation in Stanton, CA usually means working on a 1950s-1970s single-family rental with original aluminum single-pane windows, or on a manufactured home that needs HUD-compliant units with entirely different rough-opening sizes. The two jobs share almost nothing. Stanton’s position about 8-10 miles inland means summer heat and Santa Ana winds hit these older frames harder than homeowners expect, which is why we start every Stanton estimate with the measured survey you keep, written prices before any work starts, and a photo record when the job is done. Call (509) 265-6387 to schedule your free estimate.
Why Stanton Homes Are Different
Stanton is one of the few Orange County cities where window and door contractors routinely split their workload between aging 1950s-1970s single-family rentals still fitted with original aluminum single-pane windows and a high concentration of mobile home and manufactured-housing communities. Those are two entirely different product lines, rough-opening sizes, and permitting tracks that neighboring cities like Cypress or Los Alamitos rarely require contractors to juggle simultaneously.
The housing stock here is predominantly modest, densely packed post-WWII single-family homes and duplexes built between the late 1940s and mid-1970s. Most retain their original aluminum-frame single-pane windows with deteriorated weatherstripping and non-standard rough openings. The city also has a disproportionately high number of mobile home parks for an Orange County municipality, which means HUD-compliant window units and specialized door widths that differ entirely from site-built home work.
Climate adds another layer. Stanton runs noticeably hotter than Seal Beach or Huntington Beach, and summer afternoons accelerate UV degradation of vinyl frames and cause seal failures in insulated glass units faster than a southern California contractor might expect. Santa Ana wind events funnel through the OC basin and regularly stress door hardware, threshold seals, and sliding glass door tracks in the area’s older housing. A large share of Stanton’s window replacement calls come from landlords, not owner-occupants, which means jobs are priced tight while California Title 24 energy compliance paperwork still has to be done correctly for permit pulls. Sliding glass doors on 1960s-70s units are almost always the original anodized aluminum sliders with worn rollers and frames that are out of square, requiring shimming skills that tract-home new-construction work in newer OC cities never develops.
Our Main Stanton Services
The two services Stanton homeowners and landlords call about most are door installation and window replacement, and each has its own dedicated page with local pricing, sub-job details, and the conditions specific to this city’s housing stock.
Door Installation in Stanton
Front doors on Stanton’s older single-family homes rarely sit square anymore; decades of drywall settlement and foundation micro-movement in this part of Orange County leave door frames racked by a quarter-inch or more. We measure the actual rough opening, shim to correct the rack, and install a door that latches cleanly without dragging. Mobile home doors are a different track entirely, with HUD-specified widths and hardware. Learn more on the Door Installation in Stanton page.
Window Replacement in Stanton
Most Stanton window replacement work comes from landlords who want a tight, code-compliant job at a defensible price, and from owner-occupants tired of original single-pane aluminum frames that rattle in Santa Ana winds. We pull the Title 24 paperwork correctly, quote from the measured survey that becomes your written price, and replace non-standard rough openings without buried change orders. Details are on the Window Replacement in Stanton page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterWindow Installation in Stanton
Window installation in Stanton most often means either replacing original aluminum single-pane windows in a 1950s-1970s rental, or fitting HUD-compliant units into a manufactured home with a different rough-opening system altogether. We do both from the same process: a measured survey you keep, a written price before any work starts, and a documented photo record when the job is done. You can find the full scope of our Window Installation work here, but below is what the job looks like specifically in Stanton.
Single & Double Hung Windows
Signs you need it
Upper sashes that slide down on their own, rattling in Santa Ana winds, or weights and springs that no longer hold the sash in place.
What it costs in Stanton
Single and double hung window installation in Stanton typically runs $450-$1,100 per opening, with the higher end covering replacement of out-of-square frames common in the city’s older housing.
How we do it
We measure the existing rough opening, check for rack and sag against the frame, install with shims where the 1960s framing has drifted, and flash, seal, and trim to the written scope.
Casement Windows
Signs you need it
Crank mechanisms that slip, hinges that bind, or a sash that no longer seals tight against the frame, letting dust from Stanton’s hot, dry summers inside.
What it costs in Stanton
Casement window installation in Stanton typically runs $550-$1,300 per opening, depending on whether the original rough opening is square or needs reframing.
How we do it
We remove the old operator and sash, confirm the rough opening against the measured survey, set the new casement unit, and anchor, flash, and seal before re-trimming the interior.
What Window Installation Costs in Stanton
| Item | Typical range in Stanton |
|---|---|
| Single hung window | $450-$900 |
| Double hung window | $550-$1,100 |
| Casement window | $550-$1,300 |
Does Stanton require a permit for window replacement?
Yes, when the opening size or frame changes, Stanton building department requires a permit, and California Title 24 energy compliance documentation must accompany it. We handle the paperwork; call (509) 265-6387 for an exact quote on your project.
Do you work on mobile home windows in Stanton?
Yes, we install HUD-compliant window units sized to manufactured-home rough openings, which differ from site-built work. Bring us your park’s specs and we’ll quote from a measured survey. Call (509) 265-6387 for a free estimate.
Impact Windows & Doors in Stanton
Impact windows and doors in Stanton aren’t just a coastal product; Santa Ana wind events funnel through the OC basin hard enough to stress older frames and send debris into glass, which is why landlords and owner-occupants here increasingly spec impact-rated openings. Our Impact Windows & Doors work covers the full range. The written price includes the measured survey, and the install leaves a photo record.
Impact-Resistant Windows
Signs you need it
Original single-pane aluminum windows on a Stanton home that face open lots or streets where Santa Ana winds regularly carry debris, or any window within reach of a child’s flying ball.
What it costs in Stanton
Impact-resistant windows in Stanton typically run $600-$1,600 per opening, with the range reflecting frame material, size, and whether the rough opening needs correction.
How we do it
We spec the right impact-rated glazing for the exposure, confirm the rough opening, install the unit with proper anchors, and flash and seal to the manufacturer’s wind-load rating.
Horizontal Roller & Sliding Impact Windows
Signs you need it
A sliding window track that binds or has been jammed by wind pressure, or rollers that no longer carry the sash without the frame flexing.
What it costs in Stanton
Horizontal roller and sliding impact windows in Stanton typically run $500-$1,400 per opening, including the track replacement most older Stanton homes require.
How we do it
We pull the old sliders, measure the track and rough opening against the survey, install the new impact-rated rollers and frame, and re-seal the threshold and head.
What Impact Windows & Doors Costs in Stanton
| Item | Typical range in Stanton |
|---|---|
| Impact-resistant window | $600-$1,600 |
| Impact sliding window | $500-$1,400 |
| Impact door | $1,200-$3,500 |
Are impact windows overkill for Stanton if I’m not near the beach?
No. Santa Ana winds regularly exceed 40 mph in Stanton and drive debris into glass, and impact-rated openings also improve break-in resistance. The cost difference is a few hundred dollars per opening. Call (509) 265-6387 for a written quote.
Will impact windows change the noise level in my Stanton home?
Yes, impact glazing measurably reduces exterior sound, which matters on Stanton streets with dense rental housing and traffic. The reduction depends on the glazing package. Call (509) 265-6387 for specs.
Energy-Efficient Windows in Stanton
Stanton’s summer afternoons run noticeably hotter than coastal Orange County, which means a single-pane aluminum window from 1965 is delivering heat into your living room all afternoon. Energy-efficient windows with the right U-factor and SHGC cut that transfer and reduce the AC load on homes built before modern insulation standards. Our Energy-Efficient Windows line covers low-E, argon, and laminated options specified to the opening, not to margin.
Low-E & Argon Gas Glass
Signs you need it
Rooms that face west in Stanton and heat up sharply by mid-afternoon, or single-pane windows you can feel radiating warmth from the inside.
What it costs in Stanton
Low-E and argon glass replacement windows in Stanton typically run $450-$1,200 per opening, depending on frame material and the condition of the original frame.
How we do it
We spec the low-E coating and argon fill for the window’s orientation, install the unit into the measured opening, and seal with the same flashing and trim standard as every job.
UV-Blocking & Fade Protection
Signs you need it
Faded flooring, furniture, or window coverings on the south and west sides of your Stanton home, where UV exposure is strongest.
What it costs in Stanton
UV-blocking window installation in Stanton typically runs $400-$1,000 per opening, with the glazing upgrade adding a modest premium over standard glass.
How we do it
We specify a glazing package with the UV-blocking performance you need, install the unit, and confirm performance against the written quote before we leave.
What Energy-Efficient Windows Costs in Stanton
| Item | Typical range in Stanton |
|---|---|
| Low-E window | $450-$1,100 |
| Argon gas window | $500-$1,200 |
| UV-blocking window | $400-$1,000 |
What U-factor and SHGC should I target for Stanton?
For Stanton’s inland heat, a U-factor of 0.30 or lower and a solar heat gain coefficient (SHGC) of 0.25 or lower works well on west-facing openings. We’ll spec the exact numbers in writing. Call (509) 265-6387.
Do energy-efficient windows qualify for utility rebates in Stanton?
Some southern California utility programs offer rebates on qualifying ENERGY STAR windows, and we document the product specs you need to apply. Call (509) 265-6387 to check eligibility for your job.
Sliding & Patio Doors in Stanton
Sliding glass doors on Stanton’s 1960s-70s units are almost always the original anodized aluminum sliders with worn rollers and frames that are out of square, which is a very different job than swapping a modern door. Our Sliding & Patio Doors work starts from the measured survey you keep, and the written quote cannot differ from that document. Here is what the most common Stanton slider jobs look like.
Sliding Glass Door Replacement
Signs you need it
A slider that takes two hands and a hip-check to open, rollers that grind on flattened tracks, or a frame that has visibly pulled away from the wall at the header.
What it costs in Stanton
Sliding glass door replacement in Stanton typically runs $1,200-$3,200 per door, with out-of-square framing and rotted threshold repair adding to the top of the range.
How we do it
We measure the opening against the survey, order the door to the actual dimensions, remove the old frame, re-shim the opening square, and install, flash, and seal.
Impact Sliding Glass Doors
Signs you need it
A Stanton rental or residence where the patio door faces a yard or street with exposure to Santa Ana wind-driven debris, or a homeowner who wants the security benefit of impact glazing on a large opening.
What it costs in Stanton
Impact sliding glass doors in Stanton typically run $1,800-$5,000, depending on size, frame material, and whether the rough opening needs substantial correction.
How we do it
We spec the impact-rated door to the wind-load requirement, install the frame and panels to the manufacturer’s system, and document the finished opening in photos.
What Sliding & Patio Doors Costs in Stanton
| Item | Typical range in Stanton |
|---|---|
| Sliding glass door replacement | $1,200-$3,200 |
| Impact sliding glass door | $1,800-$5,000 |
| Screen door installation | $150-$500 |
Why do so many Stanton sliders need shimming instead of a simple swap?
Decades of drywall settlement and framing movement leave the original 1960s-70s openings out of square. A direct swap binds and jams; the fix is corrective shimming before the new frame goes in. Call (509) 265-6387 for a quote.
Can you match the door to my Stanton mobile home’s existing opening?
Yes, manufactured home door widths are typically narrower and have different threshold profiles, and we order to the HUD-specified dimensions from the measured survey. Call (509) 265-6387 for details.
Impact Garage Doors in Stanton
Impact garage doors in Stanton often get called “hurricane doors,” but the real driver here is Santa Ana wind pressure on a 1970s two-car garage with aging track hardware. Our Impact Garage Doors work covers wind-load code compliance, replacement, and energy-efficient options. As with every job, the written price comes first, and the photo record comes last.
Garage Door Replacement
Signs you need it
A garage door that bows inward during Santa Ana events, panels that have separated from the hinges, or a track system that shakes when the door moves.
What it costs in Stanton
Garage door replacement in Stanton typically runs $1,500-$4,500, with impact-rated doors and custom sizes at the higher end of the range.
How we do it
We confirm the wind-load requirement for the opening, measure the rough opening and track, install the new door and hardware to the manufacturer’s system, and document the finished job.
Wind-Load Code Compliance
Signs you need it
A Stanton home that has been flagged during a sale or rental inspection for a garage door that does not meet current wind-load requirements for inland Orange County.
What it costs in Stanton
Wind-load code compliance retrofits in Stanton typically run $700-$2,000, depending on whether the fix is hardware-only or a full door replacement.
How we do it
We bring the opening to code with the specified door or hardware package, document the compliance work, and provide the paperwork the city or buyer requests.
What Impact Garage Doors Costs in Stanton
| Item | Typical range in Stanton |
|---|---|
| Garage door replacement | $1,500-$4,500 |
| Wind-load compliance retrofit | $700-$2,000 |
| Energy-efficient garage door | $1,300-$3,800 |
Do I really need wind-load compliance on a Stanton garage door that isn’t coastal?
Yes, Stanton sits in an inland wind zone where Santa Ana events regularly stress garage doors, and current code applies. You may not need the coastal impact rating, but you do need the right hardware. Call (509) 265-6387.
How long does a garage door replacement take in Stanton?
Most single-door replacements are completed in one day, assuming the rough opening is structurally sound. Older Stanton garages sometimes need track reinforcement first. Call (509) 265-6387 to schedule.
Custom & Geometric Windows in Stanton
Custom and geometric windows in Stanton tend to come up when a landlord wants to preserve the original mid-century curb appeal of a 1950s-60s unit, or when an owner-occupant is remodeling and wants an arched or oversized opening that doesn’t come off a shelf. Our Custom & Geometric Windows work is spec’d to the exact sightlines and dimensions in your measured survey, with the written price fixed before we order glass.
Arched & Curved Windows
Signs you need it
A deteriorating original arched window on a mid-century Stanton home that you want to replace without losing the architectural line of the facade.
What it costs in Stanton
Arched and curved window replacement in Stanton typically runs $900-$2,500 per opening, depending on radius, glazing, and frame material.
How we do it
We template the radius from the existing opening, order the custom unit, install it into the prepared rough opening, and flash and seal to match the original sightline.
Oversized Openings
Signs you need it
A Stanton living room or dining area where a large opening currently holds a dated, under-insulated pane that you want replaced with a single custom unit.
What it costs in Stanton
Oversized window opening installation in Stanton typically runs $1,000-$3,000 per opening, with structural header work pushing toward the top of the range.
How we do it
We measure the rough opening, confirm structural requirements, order the custom unit, install it with proper support, and document the finished sightline.
What Custom & Geometric Windows Costs in Stanton
| Item | Typical range in Stanton |
|---|---|
| Arched window | $900-$2,500 |
| Geometric/shaped window | $700-$2,000 |
| Oversized opening | $1,000-$3,000 |
Can you match the exact radius of my existing Stanton arched window?
Yes, we template the existing radius directly from the opening and order the new unit to that measurement, so the sightline stays identical. Call (509) 265-6387 for a quote.
Do custom windows take longer than standard units in Stanton?
They do add fabrication lead time, usually two to four weeks depending on the manufacturer, and we name that in the written quote before you commit. Call (509) 265-6387 to start.
Brands We Service in Stanton
We service CGI, CWS, and ES Windows products in Stanton, with parts for common local units stocked for faster turnaround on warranty work and repairs. Standard replacement parts for major lines typically arrive within a few business days. See our brands for the full list of manufacturers we work with.
Pricing for Windows & Doors in Stanton, CA
| Service | Typical range in Stanton |
|---|---|
| Single hung window installation | $450-$900 |
| Double hung window installation | $550-$1,100 |
| Casement window installation | $550-$1,300 |
| Impact-resistant window installation | $600-$1,600 |
| Low-E / argon window installation | $450-$1,200 |
| UV-blocking window installation | $400-$1,000 |
| Sliding glass door replacement | $1,200-$3,200 |
| Impact sliding glass door | $1,800-$5,000 |
| Garage door replacement | $1,500-$4,500 |
| Arched / custom window | $900-$2,500 |
In Stanton, the biggest price drivers are out-of-square rough openings on 1950s-70s homes, HUD-compliant sizing for mobile home work, and Title 24 compliance paperwork on every permitted job. Every estimate we write includes the measured survey as the same document, so the price you see is the price you pay. No change orders, no surprises.
Neighborhoods We Serve in Stanton
We cover Stanton from the older residential blocks west of Beach Boulevard to the manufactured home communities throughout the city. Response time for estimates is typically within one to two business days.
- Stanton core (Beach Blvd corridor)
- Cerritos Avenue area
- Katella Avenue area
- Mobile home and manufactured home parks citywide
- Neighborhoods bordering Garden Grove and Westminster
Service Area - Cities Near Stanton
While this page focuses on Stanton, our crews also cover nearby Orange County and regional cities. You can find detailed local pricing and conditions for Cypress, TX, Buena Park, CA, Westminster, CA, and Anaheim, CA on their own pages.
Serving Stanton, CA - Our Local Coverage Area
We’re based in the Stanton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Stanton
We typically schedule measured surveys within one to two business days across Stanton, including the mobile home communities. You’ll keep the survey document regardless of whether you proceed. Call (509) 265-6387 to book your free estimate.
Yes, California Title 24 energy compliance documentation is part of every permitted window or door job we do in Stanton. We prepare the paperwork correctly the first time, which matters for landlords and resale inspections. Call (509) 265-6387 with your project details.
We are state-licensed, insured, and bonded, and every technician who arrives at your Stanton property has been background-checked and is identified by license number before arrival. The written quote is yours to keep. Call (509) 265-6387 to schedule.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Stanton Customers Say
"Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T."The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R."Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B.