Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Culver City, CA
Window installation in Culver City starts with a measured survey we hand you in writing before any tool is lifted, which matters here because most homes are 1940s-1960s ranch and post-war bungalow stock with original aluminum or steel-casement single panes that don’t match modern rough opening sizes. The marine layer and salt-laden air from Santa Monica Bay, five to seven miles west, corrode aluminum frames and hardware faster than homeowners expect. If you’re pricing replacement windows or doors, call (509) 265-6387 for a written, line-item estimate based on actual measurements.
Why Culver City Homes Are Different
Culver City operates its own Building & Safety Department, separate from the City of Los Angeles that surrounds it on most sides. Every window or door replacement permit runs through Culver City’s own inspectors, who enforce Title 24 Climate Zone 8 requirements and are known to scrutinize egress compliance on bedroom window swaps in the dense 1950s tract neighborhoods west of Overland Avenue. Windows that were grandfathered for decades get flagged the moment a permit is pulled, so a “like-for-like” quote without confirming the minimum 5.7 sq ft net clear opening can turn into an unexpected rough-opening modification. That’s a real cost driver, and we account for it in the written survey before quoting, not after demo starts.
The housing stock is predominantly single-story California ranch homes and bungalows with non-standard rough opening dimensions. A smaller but notable set of 1920s-1930s Spanish Colonial Revival homes carries wood-frame arched and divided-lite windows that need custom fabrication, which most off-the-shelf replacement lines simply can’t cover. Add the persistent morning marine layer and salt-laden coastal air, and aluminum frames here pit and hardware seizes faster than inland. Anodized or thermally broken aluminum and fiberglass frames cost more upfront, but they’re the correct specification for this microclimate, not an upsell.
Our Main Culver City Services
Two services account for most of the calls we take from Culver City homeowners: full door installation and full window replacement. Each has its own detailed Culver City page below.
Door Installation in Culver City
Culver City door jobs often involve bringing an older opening up to current egress and weather-sealing standards, especially on 1940s bungalows where the original door frame has shifted and the threshold has rotted from years of marine-layer moisture. We measure the rough opening, document the existing conditions, and specify a door that fits the actual framing rather than forcing a stock size. See the full scope on our Door Installation in Culver City page.
Window Replacement in Culver City
Most Culver City window replacements involve removing original aluminum or steel-casement single panes, then fitting a properly flashed and insulated unit into a non-standard rough opening. Culver City’s own Building & Safety inspectors review the permit, and egress compliance on bedrooms is a frequent flag point. We pre-check the net clear opening during the survey. Full details are on the Window Replacement in Culver City page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterWindow Installation in Culver City
Window installation in Culver City usually means removing a 1940s-1960s single-pane aluminum or steel-casement unit and fitting a properly flashed, insulated replacement into a rough opening that doesn’t match modern stock sizes. The marine layer and salt air mean frame material choice matters more here than inland: anodized or thermally broken aluminum and fiberglass hold up far better against pitting and corroded hardware. This is the full scope of our Window Installation work, priced in writing before we start.
Single & Double Hung Windows
Signs you need it
Weights, sash cords, or spiral balances fail, so the sash no longer stays open, or the frame has oxidized enough that the window won’t close tight against the marine air.
What it costs in Culver City
Single and double hung window installation in Culver City typically runs $600-$1,900 per window depending on frame material and glass package.
How we do it
We measure the rough opening in person, specify the right balance system and frame material, pull the Culver City permit, then remove the old sash and frame, install the new unit with flashing and insulation, and leave a photo record.
Casement Windows
Signs you need it
Crank mechanisms bind or strip, and the single-pane steel casements common in older Culver City homes no longer seal against salt-air corrosion.
What it costs in Culver City
Casement window installation in Culver City typically runs $800-$2,100 per window depending on size, operator type, and glazing.
How we do it
We measure and document the rough opening, check egress clearances where bedrooms are involved, then install the new casement with a full perimeter seal and verify operation before we leave.
What Window Installation Costs in Culver City
| Item | Typical range in Culver City |
|---|---|
| Single or double hung window | $600-$1,900 |
| Casement window | $800-$2,100 |
| Awning or hopper window | $500-$1,700 |
Do window installers in Culver City pull their own permits?
We pull every permit through Culver City’s Building & Safety Department and meet its inspectors on site. Written into the price before work starts, so you know the permit cost on the same document as the labor.
Will my 1950s rough opening need modification for new windows?
Often, yes. Non-standard rough openings are the norm in Culver City ranch homes. We measure and document the opening during the survey, so any modification is priced in writing before work begins. Call (509) 265-6387 for a measured estimate.
Impact Windows & Doors in Culver City
Impact windows and doors in Culver City are specified less for hurricane risk than for the salt-air corrosion and the security and noise concerns that come with homes five to seven miles from Santa Monica Bay. Older aluminum frames pit quickly in this marine belt, and impact-rated units use heavier laminated glass and reinforced frames that hold up better and reduce street noise. This is the scope of our Impact Windows & Doors work.
Impact-Resistant Windows
Signs you need it
Existing aluminum frames show pitting or white corrosion, or you want a single replacement that handles salt air, security, and noise in one laminated-glass unit.
What it costs in Culver City
Impact-resistant windows in Culver City typically run $1,100-$2,800 per window depending on size and frame line.
How we do it
We measure and document the opening, specify an impact-rated unit from PGT, CGI, or ES Windows in the performance tier the location requires, then install with full flashing and a photo record.
Horizontal Roller & Sliding Impact Windows
Signs you need it
Track rollers bind from salt-air corrosion, or the sliding sash no longer seals and air moves around the edges.
What it costs in Culver City
Horizontal roller and sliding impact windows in Culver City typically run $1,200-$3,200 per window depending on span and frame material.
How we do it
We measure the track and rough opening, specify an impact-rated sliding unit, replace or rebuild the track as needed, and install with a full perimeter seal.
What Impact Windows & Doors Costs in Culver City
| Item | Typical range in Culver City |
|---|---|
| Impact-resistant window | $1,100-$2,800 |
| Horizontal roller or sliding impact window | $1,200-$3,200 |
| Impact sliding glass door | $3,500-$8,000 |
Do I need impact windows in Culver City even without hurricane risk?
Impact-rated laminated glass reduces street noise, resists salt-air corrosion better than standard glass, and meets stricter security expectations. For many Culver City homeowners, those are the real reasons they buy. Call (509) 265-6387 for a written quote.
Will impact windows change the look of my Spanish Colonial revival home?
We can match divided-lite patterns and frame profiles on impact-rated units, including wood-frame arched windows with custom fabrication. The documentation you receive will show the exact spec before you commit.
Energy-Efficient Windows in Culver City
Energy-efficient windows in Culver City address a specific problem: the marine layer keeps mornings cool and damp, and single-pane aluminum frames from the 1940s-1960s transfer that damp chill and the afternoon heat straight through the wall. Low-E glass and insulated frames cut condensation and quiet the house, and they make a measurable dent in HVAC load in a climate that swings between fog and full sun in the same day. This is the scope of our Energy-Efficient Windows work.
Low-E & Argon Gas Glass
Signs you need it
Single panes show persistent morning condensation, or rooms facing west heat up noticeably in the afternoon sun after the marine layer burns off.
What it costs in Culver City
Low-E with argon gas glass in Culver City typically runs $700-$2,000 per window depending on frame material and glass package.
How we do it
We measure the opening, specify the right U-factor and SHGC for Climate Zone 8, and install the unit with a full thermal break and perimeter seal.
ENERGY STAR Replacement Windows
Signs you need it
Original aluminum or steel-casement windows conduct heat and cold directly into the house, and you want a documented efficiency upgrade rather than a like-for-like swap.
What it costs in Culver City
ENERGY STAR replacement windows in Culver City typically run $800-$2,300 per window depending on frame line and glazing.
How we do it
We specify an ENERGY STAR-rated unit from ECO Window Systems or CWS in the performance tier the opening requires, then install with flashing and insulation, and document the final U-factor in writing.
What Energy-Efficient Windows Costs in Culver City
| Item | Typical range in Culver City |
|---|---|
| Low-E with argon gas window | $700-$2,000 |
| ENERGY STAR replacement window | $800-$2,300 |
| UV-blocking or solar control glass | $900-$2,500 |
How much difference do energy-efficient windows actually make in Culver City’s climate?
The biggest change is condensation control and west-facing heat gain. Low-E glass and insulated frames reduce both, and we document the U-factor and SHGC on the written quote. Call (509) 265-6387 for a measured estimate.
Will new windows solve the marine-layer condensation on my single panes?
Yes, in most cases. Single-pane aluminum is the source, and an insulated low-E unit removes the cold surface that creates the condensation. We verify this with frame readings during the survey.
Sliding & Patio Doors in Culver City
Sliding and patio doors in Culver City take a beating from the salt-laden marine air that corrodes rollers and tracks on older aluminum sliders, especially on the back walls of ranch homes that open to the patio. Replacement means either a proper new sliding unit or a swing-style French door, and in Culver City the rough opening is rarely square after sixty years of settling. This is the scope of our Sliding & Patio Doors work.
Sliding Glass Door Replacement
Signs you need it
The door drags or binds on corroded rollers, the frame is pitted, or air moves around the edges when the marine layer pushes in.
What it costs in Culver City
Sliding glass door replacement in Culver City typically runs $2,500-$6,000 per door depending on panel count, frame material, and glass package.
How we do it
We measure the full opening and plumb line, document roller and track condition, then remove the old unit and install a new slider with a full flashing and seal detail, plus a photo record.
Impact Sliding Glass Doors
Signs you need it
You want a slider that handles salt-air corrosion and street noise together, or you’re replacing a west-facing patio door that takes the brunt of afternoon sun and ocean air.
What it costs in Culver City
Impact sliding glass doors in Culver City typically run $3,500-$8,000 per door depending on span and manufacturer line.
How we do it
We specify an impact-rated unit from CGI or ES Windows in the performance tier the location requires, then install with upgraded track and hardware and document the full job.
What Sliding & Patio Doors Costs in Culver City
| Item | Typical range in Culver City |
|---|---|
| Sliding glass door replacement | $2,500-$6,000 |
| Impact sliding glass door | $3,500-$8,000 |
| Screen door installation | $300-$900 |
Why does my existing slider bind only in the morning?
Marine-layer moisture swells and corrodes the track and rollers, and the issue clears as the day warms. The fix is a new track and roller set or a full replacement, documented in the written scope. Call (509) 265-6387 for a quote.
Can you replace just the sliding door, or does the whole frame need to come out?
It depends on frame condition. Pitted or out-of-square frames need full replacement; otherwise we can often replace the panel and hardware. We document what we find before you commit to a price.
Impact Garage Doors in Culver City
Impact garage doors in Culver City address the same marine-layer corrosion and security concerns as impact windows, but on the largest opening in the house. Older steel or aluminum garage doors in 1940s-1960s ranch homes rust and pit quickly in the salt air, and an impact-rated door with laminated panels and reinforced bracing is the correct long-term specification. This is the scope of our Impact Garage Doors work.
Hurricane-Rated Garage Doors
Signs you need it
Existing panels show rust or pitting from salt air, or you want documented wind-load compliance on the garage opening.
What it costs in Culver City
Hurricane-rated garage doors in Culver City typically run $4,000-$10,000 per door depending on size, track type, and bracing.
How we do it
We measure the full opening and track layout, specify an impact-rated door with the required wind-load rating, and install with reinforced tracks and a photo record.
Garage Door Replacement
Signs you need it
The door is dented, rusted, or so corroded at the bottom panel and track that it no longer opens reliably, or it’s an old wood door that’s warped from marine moisture.
What it costs in Culver City
Garage door replacement in Culver City typically runs $2,500-$6,500 per door depending on material, insulation, and opener retention.
How we do it
We document the existing opening and track condition, specify the replacement, and install with new perimeter seals, then hand you the written warranty and photo record.
What Impact Garage Doors Costs in Culver City
| Item | Typical range in Culver City |
|---|---|
| Hurricane-rated garage door | $4,000-$10,000 |
| Garage door replacement | $2,500-$6,500 |
| Energy-efficient garage door | $2,400-$6,000 |
Do garage door replacements in Culver City require a Building & Safety permit?
Yes, and Culver City’s own inspectors review the wind-load and egress details before final sign-off. The permit cost and schedule are written into the same document as the labor price. Call (509) 265-6387 for a measured estimate.
Will an impact garage door be noticeably heavier and harder on my opener?
Yes, it’s heavier, and the opener may need to be resized or replaced. We spec the door and the opener together in the written quote so there’s no surprise on install day.
Custom & Geometric Windows in Culver City
Custom and geometric windows in Culver City matter most for the 1920s-1930s Spanish Colonial Revival homes with wood-frame arched and divided-lite windows, and for the ranch homes where a non-standard rough opening means no stock unit fits without modification. Since much recent commercial work along the Hayden Tract and Washington Boulevard corridor is storefront and curtain-wall, custom fabrication is a normal part of the trade in Culver City, not a special order. This is the scope of our Custom & Geometric Windows work.
Geometric & Shaped Windows
Signs you need it
You have a trapezoid, radius, or other non-rectangular opening that stock replacement windows can’t fill, or you want to add a shaped window where none exists.
What it costs in Culver City
Geometric and shaped windows in Culver City typically run $1,500-$4,500 per window depending on size, shape, and frame material.
How we do it
We measure and template the exact opening or plan, then fabricate the unit to spec from ES Windows or ECO Window Systems and install with a full perimeter seal.
Arched & Curved Windows
Signs you need it
An original wood-frame arched window is rotted or failed, or you’re restoring a Spanish Colonial Revival opening and need a matching radius in a modern material.
What it costs in Culver City
Arched and curved windows in Culver City typically run $1,800-$5,000 per window depending on radius, glass package, and frame material.
How we do it
We create a precise template of the arch, fabricate the unit to that radius, and install it with the divided-lite pattern matched to the rest of the house, documented in writing.
What Custom & Geometric Windows Costs in Culver City
| Item | Typical range in Culver City |
|---|---|
| Geometric or shaped window | $1,500-$4,500 |
| Arched or curved window | $1,800-$5,000 |
| Oversized opening | $2,000-$6,000 |
How long does custom fabrication take in Culver City?
Most custom and geometric units take three to six weeks from template to install. We document the fabrication schedule on the written quote so you can plan around it. Call (509) 265-6387 for a measured estimate.
Can you match the original divided-lite pattern on my Spanish Colonial revival windows?
Yes. We template the original, match the lite pattern and frame profile, and fabricate in modern materials that hold up to Culver City’s salt air better than the original wood.
Brands We Service in Culver City
We install and service PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. Common hardware and replacement parts are stocked locally for faster turnaround on Culver City jobs, and we specify by performance tier and price range, not by margin. See our brands for the full line card.
Pricing for Windows & Doors in Culver City, CA
| Service | Typical range in Culver City |
|---|---|
| Single or double hung window installation | $600-$1,900 |
| Casement window installation | $800-$2,100 |
| Impact-resistant window | $1,100-$2,800 |
| Energy-efficient window | $700-$2,300 |
| Sliding glass door replacement | $2,500-$6,000 |
| Impact sliding glass door | $3,500-$8,000 |
| Hurricane-rated garage door | $4,000-$10,000 |
| Garage door replacement | $2,500-$6,500 |
| Geometric or shaped window | $1,500-$4,500 |
| Arched or curved window | $1,800-$5,000 |
Prices in Culver City push up when an opening is non-standard and needs rough-opening modification, when egress compliance forces a larger unit, and when salt-air corrosion means full frame replacement rather than a sash swap. Every written quote from us is the measured survey and the invoice in one document under Haven Clause 1, so the price you approve is the price you pay.
Neighborhoods We Serve in Culver City
We work across Culver City’s residential pockets, from the 1950s tract streets west of Overland Avenue to the Spanish Colonial revival blocks around the downtown core and the newer builds along the Washington Boulevard corridor. Scheduling is coordinated from our Los Angeles office, with crews serving Culver City locally.
- Clarkdale
- Blanco-Culver Crest
- Veterans Park
- Carlson Park
- McManus
Service Area - Cities Near Culver City
Our crews also handle window and door work in Venice, CA, Inglewood, CA, Beverly Hills, CA, and Santa Monica, CA. Each has its own permit office and housing stock, so the measured survey and written quote carry the same Haven Standard but always get specified to the city.
Serving Culver City, CA - Our Local Coverage Area
We’re based in the Culver City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Culver City
Yes, every permitted job goes through Culver City’s Building & Safety Department, not through the City of Los Angeles. We handle the application, fees, and inspection scheduling, and the permit cost is written into the same document as the labor price before we start.
We can usually get a technician to your Culver City home within a few business days. The survey produces a written document you keep, and that becomes the basis of the quote. Call (509) 265-6387 to set a date.
Not a specific brand, but the city enforces Title 24 Climate Zone 8 energy requirements and its own egress rules on bedroom windows. We check both during the survey and note any compliance items in the written scope before you approve a price.
Call (509) 265-6387 to schedule your free measured survey and written estimate in Culver City.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Culver City Customers Say
"Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B."They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C."Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H.